• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.253-258
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G=(V,E), where each node ${\nu}{\in}V$ denotes order specification and its weight ${\omega}(\nu)$ the orders on hand for the specification. We can construct a lot simply from orders of single specification. For a set of nodes (specifications) ${\theta}{\subseteq}V$, if the distance of any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when $d=2,{\lambda}=3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when $d=1,{\lambda}=3$ and each weight is 1,2 or 3.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.224-227
• /
• 2006

We have chained 459nm blue laser radiation generated by intracavity sum frequency generation( SFG ) due to the mixing of the 1064 nm laser output of a Nd:YVO4 pumped by diode and the 809nm radiation from higg-power semiconductor laser(500mW). The maximum blue output power of 0.95 mW was obtained using 400 mW input power of semiconductor laser at the type II phase matching condition (${\psi}=90^{\circ}\;{\theta}=90^{\circ}$). The threshold input power of blue laser generation was 120 mW.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.33-35
• /
• 2000

Na-K-Nb system showed a number of ferroelectric phases in bulk ceramic. [001]-axis oriented single-phase Na$_{0.5}$K$_{0.5}$NbO$_3$ (NKN) thin film have been grown on LaA1O$_3$ substrates using KrF excimer laser. X-ray diffraction $\theta$-2$\theta$ scan, rocking curves, and $\phi$ scan data evidence highly c-axis oriented along the [001] direction.ion.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.228-233
• /
• 2016

Auxetic material is a material which has negative Poisson's ratio(NPR). Auxetic material shows some distinctive property like high energy absorbing property and high shear modulus. Among these, synclastic curvature is very interesting characteristic. When synclastic-curvature-material bends, it changes its shape like dome, contrary to non-auxetic material which changes its shape like saddle(anticlastic). This distinctive property could make it easy to manufacture curved structure like nose cone or wing panel in aerospace engineering. In this study, we studied a quantitative analysis about synclastic curvature of re-entrant panel with finite element model. We suggested a concept 'Degree of Synclasticity(DOS)', which means a ratio of curvature of load-direction and load-orthogonal direction. We studied the variation of DOS with two factor, unit cell inner angle(${\theta}$) and load position angle(${\phi}$). DOS decreases as ${\theta}$ increases because the unit cell goes out of auxetic-shape. As ${\phi}$ varies, DOS changes in a large range. So proper optimization of ${\phi}$ would be needed for application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.131-135
• /
• 2003

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, $\theta/2\theta$ mode X-ray diffraction, SEM, and AFM analyses. C-axis preferred orientation, resistivity, and surface roughness highly depended on $Ar/O_2$ gas ratios. The resistivity of ZnO thin films rapidly increased with increasing oxygen ratio and the resistivity value of $9{\times}10^7{\Omega}cm$ was obtained at a working pressure of 10 mTorr with $Ar/O_2$=50/50. The surface roughness was also improved with increasing oxygen ratio and the ZnO films deposited with $Ar/O_2$=50/50 showed the excellent roughness value of $28.7{\AA}$.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.595-597
• /
• 2008

Zinc Oxide(ZnO) thin films on Si (100) substrate were deposited by RF magnetron sputter with changing sputtering conditions such as argon/oxygen gas ratios, RF power, and substrate temperature, chamber pressure and target-substrate distance. To analyze a crystallographic properties of the films, ${\Theta}/2{\Theta}$ mode X-ray diffraction, SEM analyses. C-axis preferred orientation highly depended on RF power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.460-461
• /
• 2007

본 연구에서는 반도체 플라즈마 장비 감시를 위한 CUSUM 제어 차트 설계기법에 관해 연구하였다. CUSUM 제어차트에 관여하는 설계변수의 다양한 조합에 대하여 플라즈마 장비의 감시 성능을 평가하였다. 평가를 위해 RF 정합망 감시시스템을 이용하여 플라즈마 임피던스 정합에 관여하는 정합변수에 대한 실시간 데이터를 수집하였으며, 여기에는 임피던스와 상위치에 대한 전기적 정보, 그리고 반사전력에 대한 정보가 포함된다. 평가결과, 설계변수의 조합에 대하여 감시 성능이 크게 달랐지만, 각 센서 정보의 감시 성능을 증진시키는 설계변수의 조합이 있었음을 확인하였으며, 이는 각 종 다양한 센서정보별 CUSUM 제어 차트의 설계가 필요함을 의미한다. 연구에서는 Raw 데이터 대비 성능 분석을 위해 CUSUM 제어 차트의 설계변수를 변수인 d와 ${\Theta}$값의 변화를 주어 다수의 (d, ${\Theta}$)의 조합에 따른 감시 성능을 평가하였으며, 평가에 이용된 데이터는 소스전력이 750 W, 압력이 15 mTorr, Ar 유량이 50 seem일 때 수집하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.536-539
• /
• 2000

The effects of annealing on the electrical and structural characteristics for the rf sputter deposited WO$_3$thin film. The sputtered thin films are annealed at 773K for 1 hour in air atmosphere. Oxygen flow rate were changed from 0 to 70% during sputtering. It is observed from the results of the AFM measurement that the average roughness for the rf sputter deposited WO$_3$thin film would be increased from 2.45 angstrom to 152 angstrom by annealing. The sheet resistance of the sputtered WO$_3$film is changed from insulting to MOhm after annealing. According to the results of the XRD, the as-deposited films revealed the amorphous state whereas the peaks of X-ray diffraction at 2 theta= 28 degrees and 2 theta = 25 degrees corresponding to the (111) and (200) plane of the WO$_3$film respectively are observed after annealing.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.155-162
• /
• 2004

The volume of the metal is not changed for the plastic deformation. For metal forming simulation, rigid-plastic FEM codes are widely used. Updating geometry using Euler method in the simulation, the volume loss is occurred. In this paper, hybrid method is introduced to perform a more accurate simulation reducing computation time. In the proposed hybrid method, RK2 method is used for geometry updating at first time step and after the boundary condition of the node is changed. At the others, Adams-Bashforth or theta method is applied to update geometry. The results show that the simulations of upsetting and side-pressing can be performed within 0.02％.