• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.83-90
• /
• 2011

It is well known that urgency resulted from time stress can be a great cause to industrial accidents. Therefore, time stress has been studied in the aspect of macroscopic view, namely industrial safety management, but has not been studied in microscopic view such as psychophysiological approach. Among diverse psychophysiological indices, Electroencephalogram(EEG) would be on of the most objective psychophysiological research technique on human errors though few research has been taken yet. This study aimed to get characteristics of human error while committing a simple arithmetic addition task by utilizing the power spectrum technique of EEG data. Each experiment was composed of 2 tasks under different condition - with and without time stress. As subjects, 5 young undergraduate students in their early twenties participated in this study. The results advocated a well-known fact that time stress downgrades the performance of human workers. However, correct answer rate and response time were not significantly influenced by time stress factor which might be explained by the constructural factor adopted in the present study. As in the previous studies, among various EEG-related measures, relative band power ratios of ${\alpha}$ and ${\beta}$ waves to sum of ${\alpha}$,${\beta}$,${\theta}$ wave powers, namely $P_{{\alpha}/({\alpha}+{\beta}+{\theta})}$ and $P_{{\beta}/({\alpha}+{\beta}+{\theta})}$ seemed to be the most effective measures to grasp variation of brain activities in time-stressed situation so that discussions were expanded about their variations.

• Biomolecules & Therapeutics
• /
• v.7 no.3
• /
• pp.242-248
• /
• 1999

Diazepam, a benzodiazepine (BDZ) agonist, produces sedation and flumazenil, a BDZ antagonist, blocks these actions. The aim of this study was to examine the effects of BDZs on cortical electroencephalogram (EEG) in rats. The recording electrodes were implanted over the frontal and parietal cortices bilaterally, and the reference and ground electrodes over cerebellum under ketamine anesthesia. To assess the effects of diazepam and flumazenil, rats were injected with diazepam (1 mgHg, i.p.) and/or flumazenil ( 1 mg/kg, i.p.), and the EEG was recorded before and after drugs. Normal awake had theta peak in the spectrum and low amplitude waves, while normal sleep showed large amplitude of slow waves. The powers of delta, theta and alpha bands were increased during sleep compared with during awake. Diazepam reduced the mobility of the rat and induced sleep with intermittent fast spindles and large amplitude of slow activity, and it produced broad peak over betaL band and increased the power of gamma band, which were different from EEG patterns in normal sleep. Saline injection awakened rats and abolished fast spindles for a short period about 2-5 min from EEG pattern during diazepam-induced sleep. Flumazenil blocked both diazepam-induced sleep and decreased the slow activities of delta, theta, alpha and betaL, but not of gamma activity for about 10 min or more. This study may indicate that decrease in power of betaL and betaH bands can be used as the measure of central action of benzodiazepines, and that the EEG parameters of benzodiazepines have to be measured without control over the behavioral state by experimenter.

• Korean Journal of Food Science and Technology
• /
• v.6 no.1
• /
• pp.1-5
• /
• 1974

The extraction mode of orange-yellow pigment from Gardenia is depended upon the extraction time, extraction temperature and volume of solvent. The amounts of the extracted-pigment (C) is proportional to the log ${\theta}^{1.15}$ of extraction time $({\theta}:0{\cdots}{\cdots}{\cdots}60$ min.), the log $T^{3.73}$ of extraction temperature $(T:5{\cdots}{\cdots}{\cdots}60^{\circ}C)$ and the log $S^{3.7}$ of volume of solvent $(S:5{\cdots}{\cdots}{\cdots}50ml)$ at $18^{\circ}C$ for 10 minutes. Finally, the general emperical equation was derived as follows; C=1.15 log ${\theta}$+3.73 log T+3.7 log S-7.0

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.363-371
• /
• 2019

In this study, the load carrying behavior of piled rafts installed in inclined bearing rock layer was investigated for rock-mounted and -socketed conditions. It was found that settlements induced for an inclined bearing rock layer are larger than for a horizontal layer condition. The load capacity of piled rafts for the rock-mounted condition decreased as rock-layer inclination angle (${\theta}$) increased, while vice versa for the rock-socketed condition. The load capacities of raft and piles both decreased with increasing ${\theta}$ for the rock-mounted condition. When bearing rock layer was inclined, loads carried by uphill-side piles were greater than those by downhill-side piles. The values of differential settlements of rock-mounted and -socketed conditions were not significantly different whereas slightly higher for the rock-socketed condition. The values of load sharing ratio (${\alpha}_p$) and its variation with settlement were not markedly changed by the inclination of bedrock. It was shown that ${\alpha}_p$ for piled rafts installed in rock layer was not affected by ${\theta}$ whereas actual loads carried by raft and piles may vary depending on the pile installation and rock-layer inclination conditions.

• Journal of Biomedical Engineering Research
• /
• v.40 no.1
• /
• pp.15-19
• /
• 2019

In this study, Theta Gamma Coupling (TGC) analysis was carried out after performing simple and repeated upper limb exercise and comparative experiment to observe changes in the motor cortex of the brain through TGC and to see if mobile rehabilitation therapy is actually effective. As a result, exercise using mobile devices showed higher TGC values in motor cortex as compared with simple repeat upper limb exercise. In addition, paired t-test using SPSS showed statistically significant difference between exercise using mobile devices and simple repeat exercise at P3(t=3.390, df(degree of freedom)=12, p value=0.005). Exercise using mobile devices is effective for rehabilitation because it increases the Theta-Gamma Coupling and activates the motor cortex. Also, since the mobile game contents required the subject to detailed athletic ability adjustment with immersion in the task, it may be thought that brain activation is stronger than simple rehabilitation.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.237-245
• /
• 2019

In deep mixed rock strata, a double shield TBM (DS-TBM) is easy to be entrapped by a large force during tunneling. In order to reduce the probability of the entrapment, we need to investigate a favorable driving direction, either driving with or against dip, which mainly associates with the angle between the tunneling axis and strike, ${\theta}$, as well as the dip angle of rock strata, ${\alpha}$. We, therefore, establish a 3DEC model to show the changes of displacements and contact forces in mixed rock strata through LDP (longitudinal displacement profile) and LFP (longitudinal contact force profile) curves at four characteristic points on the surrounding rock. This is followed by a series of numerical models to investigate the favorable driving direction. The computational results indicate driving with dip is the favorable tunneling direction to reduce the probability of DS-TBM entrapment, irrespective of ${\theta}$ and ${\alpha}$, which is not in full agreement with the guidelines proposed in RMR. From the favorable driving direction (i.e., driving with dip), the smallest contact force is found when ${\theta}$ is equal to $90^{\circ}$. The present study is therefore beneficial for route selection and construction design in TBM tunneling.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1570-1578
• /
• 2022

During a severe accident, steam generator (SG) tubes undergo rapid changes in the pressure and temperature. Therefore, an appropriate creep model to predict a short term creep damage is essential. In this paper, a novel creep model for Alloy 690 SG tube material was proposed. It is based on the theta (θ) projection method that can represent all three stages of the creep process. The original θ projection method poses a limitation owing to its inability to represent experimental creep curves for SG tube materials for a large strain rate in the tertiary creep region. Therefore, a new modified θ projection method is proposed; subsequently, a master curve for Alloy 690 SG material is also proposed to optimize the creep model parameters, θ_i (i = 1-5). To adapt the implicit creep scheme to the finite element code, a partial derivative of incremental creep with respect to the stress is necessary. Accordingly, creep model parameters with a strictly linear relationship with the stress and temperature were proposed. The effectiveness of the model was validated using a commercial finite element analysis software. The creep model can be applied to evaluate the creep rupture behavior of SG tubes in nuclear power plants.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.2
• /
• pp.11-16
• /
• 2006

Critical current densities were measured for a bicrystalline $(Sm_{0.8}Dy_{0.2})Ba_2Cu_3O_7$ film under various magnetic fields $({^{\rightarrow_{H}}}_a)$. The fields were varied from -0.7KOe to +0.7KOe for various orientations with respect to the film surface. The curves of the critical current densities $(J_{cb})\;vs\;{^{\rightarrow_{H}}}_a$ showed the well known butterfly-like hysteretic curves. Our data could be analyzed for the two components of field, which are normal and parallel to the film surface, respectively. We combined the effect of $H_\perp$ deduced from the data for the normal field $(\theta=90^{\circ})$ and the effect of $H_\parallel$ deduced from the data for the almost parallel field $(\theta=2^{\circ})$. Our analyses indicate that $(J_{cb})$ depends on the two components of flux density at the grain boundary. All the experimental data for various ${\theta}s$ fit well to this new formula which was obtained by multiplying the factors deduced from the field dependences of these two components.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.54-65
• /
• 1993

The paper describes and alternative method based on a new idea to measure the circular movement of machining centers. ISO has employed three testing methods for the acceptance tests of machine tools; the first is a rotating one-dimensional probe method, the second is a two-dimensional probe and a master circular ring, and the third is a kinematic ball bar. The last two methods were proposed and introduced by W. Knapp and J. B. Bryan, respectively. The newly developed method is superior to above two methods; the rotating angle can be detected and the rotating radius is variable. Circular movement errors of machining centers were investigated by the analysis of data measured by R- .THETA. method. Followint observations are obtained 1) The errors which depend on positions, i.e., periodical errors by the pitch of ball screws, errors by compensation of backlash and errors by perpendicularity of X and Y-axis, were analyzed. 2) The errors which depend on NC control system, i.e., errors by the unbalance of position-loop-gaians, errors by velocity-loop-gains and errors by feed speeds, were quantiatively analyzed. 3) The method of extracting error information, which uses moving technique of averaging angle and fourier's analysis data mesured by the R- .THETA. method, was proposed.

• Journal of Acupuncture Research
• /
• v.28 no.3
• /
• pp.131-142
• /
• 2011

Objectives : The primary purpose of this study was to examine the effect of manual acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ on normal human EEG (Electroencephalogram). And the secondary purpose of this study was to analyze the relationships between the change of EEG wave form using correlation analysis. Methods : 32 channel EEG measurement was carried out in 25 healthy participants (23 males and 2 females). EEG was measured for 21 minutes including 15 minutes of retention time. In this study, power spectrum was used as a measure of complexity. Statistical analysis was performed using Spearman correlation. Results : The results were as follows; 1. In C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 among 32 electrodes, ${\delta}$, $\theta$ and ${\beta}$ wave increased during 0-3 time intervals, and especially in case of TP7, FT7 ${\alpha}$ wave spontaneously decreased during 12~15 time intervals in manipulation group. 2. Between $\theta$ and ${\beta}$ wave and $\theta$ and ${\delta}$ wave, there was statistically significant positive correlation in C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 according to Spearman correlation analysis. 3. Between ${\alpha}$ and ${\beta}$ wave, there was statistically significant positive correlation in TP7, FT7 according to Spearman correlation analysis. Conclusions : These results suggest that TP7 and FT7 could be typical electrodes representing change of EEG after manipulated acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$. The relationships between the change of EEG wave form appear to have statistically significant positive correlation between $\theta$ and ${\beta}$ wave, $\theta$ and ${\delta}$ wave and ${\alpha}$ and ${\beta}$ wave.