• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.23-30
• /
• 2017

Most superconducting magnets which generate more than 20 T consist of nested magnets. A combination of LTS and HTS magnets is conventionally used, but high field magnets which use only HTS magnets have been developed recently. As HTS wires have very strong magnetic anisotropy, appropriate techniques should be used to consider this effect properly. The load line method has been conventionally used to design nested magnets for high field generation. Because this method considers only parallel and perpendicular magnetic fields, the effect of their orientation is not taken into account. In this paper, the actual orientation of the magnetic fields from 0 to 90 degrees is considered. The critical currents of the two kinds of high field nested magnets designed using the proposed method are calculated. The finite element method is used to calculate the distribution of the magnetic fields and the evolution strategy is used to find the critical current which maximizes the central magnetic field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1294-1300
• /
• 2010

In an environment where all nodes move, the sensor node receives anchor node's position information within communication radius and modifies the received anchor node's position information by one's traveled distance and direction in saving in one's memory, where if there at least 3, one's position is determined by performing localization through trilateration. The proposed localization mechanisms have been simulated in the Matlab. In an environment where certain distance is maintained and nodes move towards the same direction, the probability for the sensor node to meet at least 3 anchor nodes with absolute coordinates within 1 hub range is remote. Even if the sensor node has estimated its position with at least 3 beacon information, the angle ${\theta}$ error of accelerator and digital compass will continuously apply by the passage of time in enlarging the error tolerance and its estimated position not being relied. Dead reckoning technology is used as a supplementary position tracking navigation technology in places where GPS doesn't operate, where one's position can be estimated by knowing the distance and direction the node has traveled with acceleration sensor and digital compass. The localization algorithm to be explained is a localization technique that uses Dead reckoning where all nodes are loaded with omnidirectional antenna, and assumes that one's traveling distance and direction can be known with accelerator and digital compass. The simulation results show that our scheme performed better than other mechanisms (e.g. MCL, DV-distance).

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1205-1212
• /
• 2000

The effect of temperature on the sources of organic acids and sludge when phosphorus was biologically released was evaluated in this study. The sludge used in this study was obtained from sequencing batch reactor processing the swine wastewater. Temperature is one of the most important parameters influencing the phosphorus release. As a result, the rate of phosphorus released was increased as the temperatures were increased from 5 to $30^{\circ}C$ regardless of the sources of organic acids used. Under anaerobic conditions, as acetate, propionate, glucose, and domestic wastewater were used as the sources of organic acids, the corresponding activation energy($E_a$) values were 49.83, 55.82, 54.61, and 45.44 KJ/mol, respectively. Temperature coefficient($\theta$) values were 1.0676, 1.0826, 1.0748, and 1.0698, respectively. Therefore, the rate of phosphorus released was increased as temperature was increased, whereas, the effect, of the sources of organic acids and temperature on the activation energy and temperature coefficient values were minimal. When the sludge previously adapted to acetate as external organic source was used, the activation energy and temperature coefficient values were 44.94 KJ/mol and 1.0570 respectively. The effect of temperature was minimal. These values obtained from the sludge previously adapted to acetate were smaller than those from the sludge not previously adapted to the same organic acid. This suggest that the sludge previously adapted to acetate was less dependent on temperature than that not adapted to the acetate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.608-616
• /
• 2017

The purpose of this study was to compare how three kinds of emotionally different music impacted on the emotion and arousal by measuring EEG. The research method was to compare the measurement of the background EEG on Fp1 and Fp2 before, while and after listening using a 2-channel EEG device with various experimental groups aging from 20s to 50s. The results were as follows. 1) At both Fp1 and Fp2, the amplitude of alpha(8-13Hz), SMR(12-15Hz), low beta, high beta, and ${\alpha}/-{\beta}$significantly increased in all music, while at Fp2 only, theta and ??/SMR increased meaningfully.2) At right prefrontal cortex(Fp2), all bands of EEG predominated while and after listening to all songs over Fp1 except for the delta of funeral march which predominated while listening to Fp1.3) The music with a noticeably high alpha value and increased activity was Prelude. These results suggested that Prelude induced brain activity along with relaxation, and the emotionally heavy burden of funeral march decreased the activity of the left brain. This research revealed that feeling emotional change by listening to music was due to the fact that music influenced the brain activity inducing the change of emotion and arousal.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.152-159
• /
• 1999

YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) films grown on CeO$_2$-buffered r-cut sapphire substrates (CbS's) were prepared and their structural and electrical properties were measured. Post-annealed CeO$_2$ films were used as buffer layers for the experiments. It turned out that the YBCO films grown on post-annealed CbS's had the rms roughness of less than 20 ${\AA}$ and peak-to-peak roughness of about 30 ${\AA}$ when the YBCO film thickness was 3000 ${\AA}$. Meanwhile, YBCO films on in-situ grown CeO$_2$ buffer layers on r-cut sapphire substrates appeared to have the peak-to-peak roughness of more than 450 ${\AA}$. X-ray diffraction data revealed that the YBCO flms were epitaxially grown along the c-axis with the typical FWHM of(005) ${\theta}$ -2 ${\theta}$ peak about 0. 16 $^{\circ}$ and ${\Delta}$ ${\omega}$ of the (005) peak about 0.5 $^{\circ}$. T$_c$ > 87 K, ${\Delta}$T < 1 K and R(look)/R(100K) ${\ge}$3 were observed from the YBCO films. Applicability of the YBCO films for high-frequency applications was described.

• Journal of Sasang Constitutional Medicine
• /
• v.12 no.1
• /
• pp.37-47
• /
• 2000

We detect lots of problems on the manufacturing spot because of working results done without considering the aptitude and inherited temper(constitution, blood type, male and female) of the worker, and they lead to results not only the occupational disease and the cause of industrial accidents but also quality deterioration and productivity reduction in point of view of manufacturing management. For the purpose of solving these problems, this study is perfomed by grasping the correlation sasang constitutions and job characteristic of small & medium enterprises. We classify sasang constitutions to four types : so-yang-in type, tae-yang-in type, tae-em-in type, so-em-in type by the utilization of QSCC II and the doctor aid of oriental medicine, and also survey differences of classified sasang constitutions with previous studies. This study tries to identify significant features between major jobs resulting from sasang constitution types in a specific small & medium enterprise producing agricultural machinery(a tractor, a combine, etc). The results of this case study indicate that sasang constitution types influences job types. Under the working conditions that virtual reality scene photographed by video camera are running, also the effects of brain function of each worker using Electroencephalograms(EEGs) are investigated. Electroencephalograms(EEGs) provide much information about the brain function, such as relaxation, concentration, various thoughts and so on. Previous studies reported the appearance of ${\theta}$ waves and an increase in the ${\alpha}$ waves during psychologically satisfaction conditions. An statistical analysis of experiments conducted shows the various changes of brain waves(${\alpha},{\beta},{\theta},{\delta}$ waves). By means of these study results, we can identify that sasang constitutions should be applied to contribute much to quality advancement and productivity improvement through a comparative study on the job characteristic.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fibers were treated by passing on the plate heater to study the annealing effect on the change of morphological structure and physical properties. In the X-ray diffraction curves of PTT annealed, a sharp peak at 2$\theta$=15.6$^{\circ}$ appeared and the peak intensity became stronger with the increase of annealing temperature and time. This peak was based on the (010) plane of PTT crystals. The crystallinity determined by density measurement was also increased by annealing. With the increases of temperature and time, the dynamic viscoelastic behaviors were shown to be a large reduction in T(tan $\delta$$_{max}$). The birefringence and $T_g$ were also reduced, but the melting temperature was the same. These results mean that the molecular chains in armorphous region are transfered into the crystalline legion, making the remained chains relaxed during annealing at tensionless state.

• Journal of Sericultural and Entomological Science
• /
• v.48 no.1
• /
• pp.11-15
• /
• 2006

Antheraea yamamai silk fibroin powder was prepared by treatment with HCl. The prepared A. yamamai fibroin hydrolysate was characterized by gel filtration chromatography, amino acid analysis, X-ray diffractometry, circular dichroism analysis, differential thermal analysis, and thermogravimetry. The average molecular weight of A. yamamai powder was about 430 and the major amino acids composed of the powder were Ala and Ser. According to XRD analysis, A. yamamai silk powder showed sharp diffraction peaks at $2{\theta}=20.34^{\circ}\;and\;31.5^{\circ}$. CD spectrum showed a peak around 220 nm and a should 215 nm, assigned to ${\alpha}-helix\;and\;{\beta}-sheet$ structure, respectively. DSC and TGA showed that the maximum degradation temperature of powder was around $250{\sim}270^{\circ}C$. Moreover, no harmful heavy metal was contained in the A. yamamai silk fibroin hydrolysate.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.187-190
• /
• 2010

$Sn_{0.99}{^{57}Fe}_{0.01}O_2$ prepared by a sol-gel method, and studied by x-ray diffractometer, vibrating magnetometer, Superconducting quantum interference devices and M$\ddot{o}$ssbauer spectroscopy. the crystal structure were found to be a rutile tetragonal structure with space group $P4_2$/mnm, and oxygen deficiency are 5.6 % by Rietveld refinement. magnetization value were $M_s=1.95{\times}10^{-2}{\mu}_B/Fe$ at room temperature, and Curri-weiss temperature were and ${\theta}_{cw}$ = 18 k, measurement of VSM and SQUID, respectively. Mssbauer spectra of $Sn_{0.99}{^{57}Fe}_{0.01}O_2$ have been Sextet taken at various temperatures ranging from 4.2 K to RT, and isomer shift value $\delta$ = 0.18~0.36 mm/s of $^{57}Fe$ ion site all of the temperature range the state shows ferric.