• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.208-210
• /
• 2006

The enthalpies of transfer, $\Delta H_t^\theta$, of urea from water to aqueous ethanol, EtOH, propan-1-ol, PrOH, and acetonitrile, MeCN, are reported and analysed in terms of the new solvation theory. The analyses show that the solvation of urea is random in the considered solvent mixtures. It is also found that urea interact more strongly with EtOH or PrOH than water.

• Annual Conference of KIPS
• /
• 2002.04a
• /
• pp.121-124
• /
• 2002

문서의 고정된 스키마 없이 사용될 수 있는 XML문서를 관계형 데이터베이스에 문서 자체의 구조 정보와 함께 효율적으로 저장하려는 연구가 계속되고 있다. 계층적인 형태의 XML 문서들을 구조 검색하기 위한 정규 경로식 질의들을 평면 구조의 관계형 데이터베이스에서 처리하기 위해서 많은 비용이 필요하게 된다. 따라서 본 논문에서는 다양한 정규 경로식 질의들을 질의의 특성에 알맞은 방법으로 처리하는 저장 모델과 질의 처리 모델을 제안한다. 제안된 모델은 정규 경로식 질의에 포함된 경로 연산자를 분석하여 부모-자식 관계가 아닌 조상-자손 관계 조사에는 $\theta$-조인을 이용하고, 부모-자식 관계 조사에는 동등(equi)-조인을 이용하는 SQL문으로 변환 처리하여 질의 처리 효율성을 높였다.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.70-74
• /
• 2017

To research the electrical properties of ZnS thin films with various annealing conditions, ZnS was prepared by RF magnetron sputtering system and annealed in a vacuum for 10 minutes. All films were analyzed by the XRD, PL and I-V measurement system. The XRD pattern of ZnS film annealed at $100^{\circ}C$ was shifted to lower 2 theta because of the formation of a depletion region at the interface between a substrate and ZnS thin film, and the capacitance was abruptly increased. However, the pattern of XRD of ZnS film annealed at $100^{\circ}C$ with a Schottky contact was showed the amorphous structure, and the current-voltage characteristics were non-linearly observed by the Schottky contact.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.5
• /
• pp.523-534
• /
• 1998

The convection heat transfer on horizontal circular tube is studied as a conjugated heat transfer problem. With uniform heat generation in a cylindrical heater placed in a cross flow boundary condition, heat flow that is conducted along the wall of the heater creates a non-isothermal surface temperature and non-uniform heat flux distribution. In the present investigation, the effects of circumferential wall heat conduction on convection heat transfer are investigated for the case of forced convection around horizontal circular tube in cross flow of air and water. Non-dimensional conjugation parameter $ K^*$ which can be deduced from the governing energy differential equation should be used to express the effect of circumferential wall heat conduction. Two-dimensional temperature distribution$ T({\gamma,\theta})$ is presented. The influence of circumferential wall heat conduction is demonstrated on graph of local Nusselt number.

• Honam Mathematical Journal
• /
• v.31 no.4
• /
• pp.463-478
• /
• 2009

Let k be an imaginary quadratic field, ℌ the complex upper half plane, and let ${\tau}{\in}k{\cap}$ℌ, q = exp(${\pi}i{\tau}$). And let n, t be positive integers with $1{\leq}t{\leq}n-1$. Then $q^{{\frac{n}{12}}-{\frac{t}{2}}+{\frac{t^2}{2n}}}{\prod}^{\infty}_{m=1}(1-q^{nm-t})(1-q^{nm-(n-t)})$ is an algebraic number [10]. As a generalization of this result, we find several infinite series and products giving algebraic numbers using Ramanujan's $_{1{\psi}1}$ summation. These are also related to Rogers-Ramanujan continued fractions.

• Journal of ILASS-Korea
• /
• v.4 no.4
• /
• pp.30-37
• /
• 1999

The breakup characteristics of liquid sheet formed by the liquid rocket injector has a close relation with the combustion efficiency. In this paper, basic characteristics of droplet size and velocity distribution were measured with PDPA for the Like Doublet Impinging Injector. Test variables were the angle of impact, the diameter of orifice and jet velocity. Water was used as test fluid. As a result, for impingement angle less than 90 degree, following correlations were obtained between drop size and design parameters : $D_{32}({\mu}m)=295.0{\times}V^{-0.09}\times(2\theta)^{-0.1}{\times}d^{0.072}$. For impingement angle greater than 100 degree, drop sizes were increased but eventually converged to a certain limiting value.

• Journal of Industrial Technology
• /
• v.14
• /
• pp.141-153
• /
• 1994

폴리이미드 분리막에 의한 $CCl_2F_2/Air$ 혼합물의 분리특성에 관하여 온도, 압력, stage cut(${\theta}$), 주입기체 조성등의 영향을 규명하였다. 본 연구의 실험범위 내에서 이상분리인자(ideal separation factor)는 600-200이었으며, glassy polymer인 폴리이미드 분리막에 대하여 투과도가 높은 air의 투과도는 $CCl_2F_2$ (dichlorodifluoromethane, CFC-12)에 의하여 상당히 감소함을 알 수 있었다. 그러나, 폴리이미드 분리막에 대한 투과도가 낮은 $CCl_2F_2$의 투과도는 air에 의하여 투과도가 증가하였다. 또한, 수학적 모델에 의한 예측치가 실험치와 잘 일치됨을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.36-46
• /
• 1962

The author assumes that pure liquid metal is composed of molecular oscillators whose energy states are classified into two subgroups, i.e., A and B states, each being accesible to either one of the two sorts of lattice sites. The partition function involves constants characteristic of substance, which are obtainable from the Debye characteristic temperature assigned to its solid state. Calculation has been made for the various thermodynamic properties such as the vapor pressure, the entropy, and the heat capacity of liquid metals of GroupⅠelements over the temperature range from the melting points to the boiling points. The theoretical values thus obtained are in good accordances with those observed, within experimental error, although a slight derivation is observed in the atomic heat capacity.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1073-1077
• /
• 2002

Binding of dodecyl trimethylammonium bromide (DTAB) to human and bovine hemoglobin and globin samples has been investigated in 50 mM glycine buffer pH = 10, I = 0.0318 and 300 K by equilibrium dialysis and temperature scanning spectrophotometry techniques and method for calculation of average hydrophobicity. The binding data has been analyzed, in terms of binding capacity concept $({\theta})$, Hill coefficient (nH) and intrinsic Gibbs free energy of binding $({\Delta}Gbv).$ The results of binding data, melting point (Tm) and average hydrophobicity show that human hemoglobin has more structural stability than bovine hemoglobin sample. Moreover the results of binding data analysis represent the systems with two and one sets of binding sites for hemoglobin and globin, respectively. It seems that the destabilization of hemoglobin structure due to removal of heme group, is responsible of such behavior. The results indicating the removal of heme group from hemoglobin caused the depletion of first binding set as an electrostatic site upon interaction with DTAB and exposing the hydrophobic patches for protein.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.89-94
• /
• 1988

Alumina gel was prepared by the hydrolysis of aluminum isopropoxide Al(OC3H7i)3 at low temperature. Sample were calcined at the various temperatures for 10 houres in the electric furnace, respectively. In order to investigate the various propertis-thermal properties, pore size and distribution, and the transition of crystals, infrared spectroscopy, thermal analysis, particle size analysis, scanning electron microscopy, and porosimetry were employed. Transparent alumina gel was opalized at 1200$^{\circ}C$. Porosity was about 87% with pores below 0.7$\mu\textrm{m}$ and 55% at 1200$^{\circ}C$. The gel was transformed along the rising of temperature as follows; Boehmite\longrightarrow$\delta$-Al2O3\longrightarrow$\theta$\longrightarrowAl2O3\longrightarrow${\alpha}$-Al2O3.