• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1038-1042
• /
• 2005

We have investigated dielectric properties depending on bias voltage in organic light-emitting diodes using 8-hydroxyquinoline aluminum $(Alq_3)$ as an electron transport and emissive material. We analyzed the dielectric properties of organic light-emitting diodes using impedance of characteristics. Impedance characteristics was measured complex impedance Z and phase $\theta$ in the frequency range of 40 Hz to $10^8$ Hz. We obtained complex electrical conductivity, dielectric constant, and loss tangent $(tan\delta)$ of the device at room temperature. From these analyses, we are able to interpret a conduction mechanism and dielectric properties contributed by an interfacial and orientational polarization.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1522-1524
• /
• 1997

In this paper, we measured the impedence |Z| and phase angle $\theta$ using the Impedence Analyzer (Hp 4192A). When frequency is varied to produce resonance, the curves(admittance diagram) are obtained. The resonant frequency is obtained also. We analyzed the operating characteristics of quartz crystal coated with sensitive LB films. That is the size of circle in the admittance diagram is decreased as to coat sensitive LB films on the quartz crystal. The resonant frequency and resistance is changed with coating on the surface.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.433-447
• /
• 2006

The problem of very large deflection of a circular cantilever arc device subjected to inward or outward polar force is studied. An exact elliptic integral solution is derived for the two cases and the results are checked using large displacement finite element analysis via the ANSYS package by performing a new novel modeling simulation technique for this problem. Excellent agreements have been obtained between the exact analytical solution and the numerical approach. From this study, a design chart for engineers is developed to predict the required value for the inward polar force for the device to switch on for a given angle forming the circular arc (${\theta}_o$). This study has several interesting applications in mechanical engineering, integrated circuit technology, nanotechnology and especially in microelectromechanical systems (MEMs) such as a MEM circular device switch subjected to attractive or repulsive magnetic forces due to the attachments of two magnetic poles at the fixed and at the free end of the circular cantilever arc switch device.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.1
• /
• pp.11-25
• /
• 1991

The steady, incompressible developing 3-dimensional turblent flow in a square sectioned curved duct has been investigated by using partially-parabolic equation and Finite Analytic Method. The calculation of turbulent flow field is performed using 2-equation K-$\epsilon$ turbulence model, modified wall function, simpler algorithm and numerically generated body fitted coordinates. Iso-mean velocity contours at the various sections are compared with the existing experimental data and elliptic solutions by other authors. In the region of $0^{\circ}<{\theta}<71^{\circ}$, present results agree with the experimental data much better than the elliptic solution for the similar number of grid points. Furthermore, for the same tolerance, the present solution converges four times faster than the elliptic solution.

• Journal of the Optical Society of Korea
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2008

We have developed a miniature fisheye lens with $190^{\circ}$ field of view operating simultaneously in the visible and the near infrared wavelengths. The modulation transfer function characteristic for the visible wavelength is sufficient for a mega-pixel-grade image sensor. The lens also has a fair resolution in the infrared wavelength region. The calibrated $f-{\theta}$ distortion is less than 5%, and the relative illumination is over 90%. In consequence, a sharp wide-angle image can be obtained which is uniform in brightness over the entire range of field angles. The real image heights for the visible and the near infrared wavelengths have been fitted to polynomial functions of incidence angle with sub-pixel accuracies. Combined with the near equidistance projection scheme of the lens, this lens can be advantageously employed in various image-processing applications requiring a wide-angle lens.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.795-798
• /
• 2008

The formation of complex $XeHCl^+$ in the collision-induced reaction of $Xe^+$ with HCl has been studied by use of classical dynamics procedures using the London-Eyring-Polanyi-Sato empirical potential energy surfaces. A small fraction of trajectories on the $Xe^+$ + HCl and Xe + $HCl^+$ surfaces lead to the formation of complex $XeHCl^+$ with life-times of 1-2 ps which is long enough to survive many rotations before redissociating back to the reactant state. The formation of complex $XeHCl^+$ occurs mainly from collision angle of $\Theta$ = ${45^{\circ}}$.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.325-332
• /
• 1998

The use of air-supported membrane has considerable attention in recent years. There are, however, a number of problems in the behavior of these structures that have not been fully investigated. For example, the problem of local loafing on such membranes has not been analyzed yet. The paper presents an analysis of internal and external potential energy of a spherical air-supported membrane with vertical longitudinal axis, subjected to local loadings. An internal pressure value of the applied load is established at which tile potential of these structures change positive. During such change the loading portion of the membrane comes into work beyond stable state. The mathematical method is used throughout the paper in obtaining solution. For the mathematical modeling, two assumption are used. One is the theta's elimination and the other is the infinite condition. The paper is illustrating the examples of spherical air membrane dome subjected to local load.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.1
• /
• pp.22-29
• /
• 2003

The study was to evaluate psychological and physiological changes of simulator sickness in the controlled condition of driving a car (1 hr. at speed of 60 km/h) in a graphic simulator. Simulator sickness was measured and analyzed every 5 min using both subjective responses(i.e., Simulator Sickness Questionnaire) and Physiological signals(EEG, HRV, Skin Temperature, GSR). The results showed that there was significant differences in subjective response 10 min after the main experiment. From 10 min after the driving, the level of subjective simulator sickness increased significantly, relative one of the rest condition. There also was significant differences in physiological responses between the rest and the 5 min after from the start of driving : for EEG, $\delta$ and $\theta$ at Fz area increased, while $\alpha$ decreased; the averaged R-R interval and skin temperature decreased; LF/HF and GSR increased. The results indicated that simulator sickness was induced by activation of the autonomic nerves and inactivation of the central nerves.

• Journal of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.195-201
• /
• 1978

Configuration and conformation of nicotine and its protonated form have been studied by MO theoretically using EHT and CNDO/2 methods. The form with angle of rotation ${\theta}\;=\;280^{\circ}$ of pyrrolidine ring was shown to be most stable and this was interpreted in terms of conjugative, electrostatic and seric effects. It was predicted that protonation occurs on the nitrogen atom of pyridine ring and forms a ${\pi}$-complex.

• Journal of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.30-32
• /
• 1964

H. Eyring등의 액체의 구조에 관한 이론에 따라서 액체 사염화탄소의 partition function을 정하였다. 이 Partition function 에 쓰인 parameter $E_s,\;{\sigma},\;{\theta},\;V_s$ 등은 액체 안의 고체와 같은 분자의 고요한 값으로 새로운 방법$^{(4)}$으로 그 값들을 정하였다. 이렇게 정해진 Partition function을 써서 액체 사염화탄소의 몰부피, 증기압, 한계점, 증발엔트로피 및 표면장력 등을 계산하였다. 계산치와 실측치를 비교한 결과 몰부피와 증기압, 엔트로피의 값은 거의 일치하였다. 표면장력 또한 실험치와 좋은 일치를 보여주는 값을 얻었다.