• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.51-73
• /
• 2002

Empirical likelihood ratio method is a new technique in nonparametric inference developed by A. Owen (1988, 2001). Sometimes empirical likelihood has difficulties to define itself. As such a case in point, we discuss the way to define a modified empirical likelihood for the location of symmetry using well-known points of symmetry as a side conditions. The side condition of symmetry is defined through a finite subset of the infinite set of constraints. The modified empirical likelihood under symmetry studied in this paper is to construct a constrained parameter space $\theta+$ of distributions imposing known symmetry as side information. We show that the usual asymptotic theory (Wilks theorem) still hold for the empirical likelihood ratio on the constrained parameter space and the asymptotic distribution of the empirical NPMLE of difference of two symmetric points is obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.492-496
• /
• 1987

The testing philosophy and control schemes are investigated and applied to construct the Automatic Microwave Leakage Inspection System (AMLIS) . AMLIS is consists of three major parts such as Material Handling Mechanism, Fine Positioning Mechanism and Scanning Mechanism. The material Handling unit is designed to perform loading and unloading microwave oven onto the testing point by pneumatic cylinder and vacuum pump. The Fine positioning part includes X-Y-.THETA. table and distance sensing equipment. The scanning part is composed of five SCARA robots, which traverse X-Y-Z catesian coordinates respectively. The leakage testing probes are placed at the end of this each robot then the path and speed are both controlled via microprocessors. A performance test of this system combined with electric parts and software is done and the basic major function of system are accomplished.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.635-636
• /
• 2008

현재 고온 2세대 YBCO CC(Coated Conductor) 초전도 선재를 사용하여 초전도 전력기기를 제작하게 되면 BSCCO 선재보다 많은 전류를 인가할 수 있지만, 자화 손실도 더 많이 발생하게 된다. 본 논문에서는 폭 12 mm YBCO CC선재를 이용하여 자화 손실을 줄일 수 있는 몇 개의 샘플을 제작하고, 먼저 각 샘플에 대해 외부에서 수직으로 (${\theta}=90^{\circ}$) 가해지는 자장 값에 대한 자화 손실을 측정하였다. 그 후에 측정값을 이용하여 임의 방향으로 가해지는 자장 값들에 대한 자화 손실을 계산하고, 측정한 값과 비교하여 자화 손실의 패턴을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.645-646
• /
• 2008

In order to evaluate a solenoid actuator's reliability, the following three-step approach was used: (1) we analyzed the cause and effect of major failures through FMEA and FTA, decided the main test items through 2-stage QFD; (2) after a performance test was carried out, five-sampled data were collected from the it; finally, we decided the reliability parameters for the industrial solenoid actuator. The reliability parameters, such as the shape parameter(${\beta}$), the scale parameter(${\theta}$), etc., were analyzed inductively by the use of MINITAP and the Weibull probability model which has been used practically in the study of the reliability.

• Journal of the Korean Society of Safety
• /
• v.5 no.1
• /
• pp.49-55
• /
• 1990

A comprehensive cycle simulation was developed to predict the performance of gasoline engine including intake and exhaust systems with variation of operating conditions and design factors. In this study, the gas exchange model, compression and expansion model, two-zone combustion model and heat transfer model were used. In order to confirm the feasibility of the simulation program, the calculated results were compared with experimental results. P-$\theta$ diagrams, I. M. E. P. and S. F. C by means of calculation showed acceptable quantitative agreement with the experimental data. Therefore, this program is particularly well adapted to indicating the direction of the optimal design and optimal operating conditions for gasoline engine.

• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.398-405
• /
• 2016

The objective of this study was to evaluate the characteristics of melanoidins formed from black garlic (BG) after different thermal processing steps. The melanoidins formed from BG during thermal processing were produced in large amounts, and the initial (280 nm), intermediate (360 nm), and final stage product (420 nm) had similar tendencies. Compounds like degraded proteins, peptides, and phenolic acids were present in the melanoidins during thermal processing. All the melanoidin samples showed different absorptions in the UV-visible spectra, although these had similar shapes. Moreover, the carbon, hydrogen, and oxygen content of melanoidins formed from BG during thermal processing decreased initially, and then increased. However, the nitrogen content increased during thermal processing. As thermal processing progressed, the molecular weight of all the melanoidin samples showed increasing intensities, whereas the major peaks of each melanoidin sample had different retention times. Furthermore, the melanoidins formed from BG after different thermal processing steps contained -OH, -CH, amide I, and III groups. The crystallinity of the melanoidins was majorly formed at $31.58^{\circ}$ and $43.62^{\circ}$ ($2{\theta}$).

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.423-435
• /
• 2017

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.

• Journal of applied mathematics & informatics
• /
• v.38 no.5_6
• /
• pp.579-590
• /
• 2020

The flatness property of a unilateral weighted shifts is important to study the gaps between subnormality and hyponormality. In this paper, we first summerize the results on the flatness for some special kinds of a weighted shifts. And then, we consider the flatness property for a local-cubically hyponormal weighted shifts, which was introduced in [2]. Let α : ${\sqrt{\frac{2}{3}}}$, ${\sqrt{\frac{2}{3}}}$, $\{{\sqrt{\frac{n+1}{n+2}}}\}^{\infty}_{n=2}$ and let W_α be the associated weighted shift. We prove that W_α is a local-cubically hyponormal weighted shift W_α of order ${\theta}={\frac{\pi}{4}}$ by numerical calculation.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.64-70
• /
• 2016

Multiple solutions in natural convection of water with Pr=7 between two horizontal plates with small magnitude non-uniform temperature distribution in the upper plate is numerically investigated. The dimensionless temperature of upper plate is ${\theta}={\epsilon}sinkx$. Two upright cells are formed over one wave length in the conduction-dominated regime of small Rayleigh number. However, multicellular convection occurs above a critical Rayleigh number for small wave number. When k = 1.5, dual solutions are found and a transition of $6{\rightarrow}4$ eddy flow occurs with decrease of Rayleigh number. When k = 0.75, two, three, four and five multiple solutions are observed. Transitions of $14{\rightarrow}12$, $12{\rightarrow}10$, $10{\rightarrow}8$ and $6{\rightarrow}8$ eddy flow occur with decrease of Rayleigh number.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.481-487
• /
• 2009

The purpose of this study is to improve the defects of dyeable polypropylene(DPP) fabric by heat setting and to describe the change of physical properties of DPP fabrics. The thermosetting was carried out in autoclave from 100 to $140^{\circ}C$ temperature range for 2 min. In this study, we investigated the effect of the thermosetting temperatures on the structural, thermal, mechanical properties(e.g., the strength and elongation) and dyeability of DPP fabrics. The melting energy(J/g), the tensile strength was found to increase with increasing temperature of thermosetting. The diffraction peak at Bragg angle($2{\theta}$) about $13.8^{\circ}$ were very strong and diffraction intensity increased with increasing thermosetting temperatures. And d-spacing and half-width decreased with increasing thermosetting temperatures. On the other hand, the dyeability(K/S) and crease recovery decreased with an increasing thermosetting temperatures.