• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.671-677
• /
• 2002

In this study, the high frequency SMD ceramic resonators with the size of $3.7{\times}3.1{\times}0.385\textrm{mm}^3$ were fabricated using $Pb_{0.88}(La_{0.6}Nd_{0.4})_{0.08}(Mn_{1/3}Sb_{2/3})_{0.02}Ti_{0.98}O_3$ ceramics with the variations of electrode radius size. With increasing the electrode radius size, resonant resistance in third overtone mode was decreased and electromechanical coupling factor($k_{t3}$) in third overtone mode was showed constant values. Taking into consideration mechanical quality factor($Qm_{t3}$) of 5,552 and dynamic range(D.R) of 60.72dB in third overtone mode, the ceramic resonator with the electrode radius size of $\theta$1.13mm was suitable for 20MHz resonator application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.218-218
• /
• 2010

본 연구에서는 투명 전극 대체 물질로써 유망한 ZnO의 전기적 특성 향상을 위하여 IV족 원소인 Si을 1, 3, 5 wt% 첨가하여 SZO 박막을 제작하여 dopant의 앙, 온도 변화에 따른 전기적, 광학적, 구조적 특성을 분석하였다. Rf-magnetron sputtering system을 이용하여 slide glass위에 증착 하였으며 $100{\sim}500^{\circ}C$ 온도 변화를 주었다. 결정성 분석을 위한 XRD 분석 결과 온도 증가에 따라 (002) peak의 세기가 증가하며, Si 첨가량과 관계없이 동일한 2 theta에서 peak가 관측되었다. 미세 구조 분석 결과 입자 크기 또한 온도 증가에 따라 증가함을 확인하였으며, 박막 두께는 대략 300nm로 확인하였다. 모든 SZO 박막은 가시광선 영역에서 80% 이상의 투과율을 보였으며 PL 분석 결과 Si 첨가량과 관계없이 동일한 스펙트럼을 가지며 380 nm, 540 nm 근처에서 peak를 확인하였다. 최소 비저항 값은 5SZO 막에서 $2.44{\times}10^{-3}\;{\Omega}cm^{-1}$을 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.62-62
• /
• 2010

Photonic quasi-crystals(PQCs) have been fabricated by a multiple-exposure nanosphere lithography (MENSL) method using the self-assembled nanospheres as lens-mask patterns. The multiple-exposing source is collimated laser beam and rotation, tilting system. The arrays of the PQCs exhibited variable lattice structures and shape the control of ratating angle ($\theta$), tilting angle ($\gamma$) and the exposure conditions. The used nanosphere size is upto the $1\;{\mu}m$. Images of prepared 2D PQCs were observed by SEM. We believe that the MENSL method is a suitable useful tool to realize the PQCs arrays of large area.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.287-289
• /
• 1993

In this paper, we improve feedforward neural network performance by eliminating the effect of gross error using classifier structure. At first, we prove the output of classifier converges to the posteriori probability of each pattern given input x, $f_0({\theta}_1|x)$. And we apply filtering approach based on the robust statistics before reconstructing continuous output. The data distorted with noise can be rejected by this process. Finally, we suggest neurofilter structure. Simulation result shows that our structure yields consistent estimates even in the presence of noise.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.37.3-37
• /
• 2001

The quality of a precision product, in genera, relies on the accuracy and precision of its manufacturing and inspection process. In many cases, the level of precision in the manufacturing and inspection system is also dependent on the positioning capability of tool with respect to the workpiece in the process. Recently the positioning accuracy level employed for some of precision product has reached the level of submicron and long range of motion is required. For example, for 1GDRM lithography, 20nm accuracy and 300nm stroke needs. This paper refers to the lithography stage especially fine stage. In this study, for long stroke and high accuracy, the dual servo system is proposed. For the coarse actuator, LDM(Linear DC Noter) is used and for fine or VCM is used ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.120.4-120
• /
• 2001

In this paper, a method of generating trajectories in real time for a mobile robot in a dynamic environment is proposed. Specifically, this method is focused on soccer-playing robots that need to calculate trajectories in real time, which are constantly subject to rapidly change as targets and obstacles move. The robots also should move at the fastest available speed, while tracking the generated trajectories. The method proposed in this paper solves the geometric problem of finding a smooth curve that joins two endpoints. To have this solved, we assign five constraints to each endpoint, which are the usual x, y, theta, and curvature as well as the influence of the initial robot velocity on the path. With these five constraints, the path generated can always be physically followed by robot. Through this method, the travel time of the robot over the entire path can b optimized. Therefore it can ...

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.95-103
• /
• 1997

A robust center estimation tecnique of n-fold engineering parts is presented, which use self-organizing neural networks with generating and merging learning for training neural units. To estimate the center of the n-fold engineering parts using neural networks, the segmented boundaries of the interested part are approximated to strainght lines, and the temporal estimated centers by thecosine theorem which formed between the approximaged straight line and the reference point, , are indexed as (.sigma.-.theta.) parameteric vecstors. Then the entries of parametric vectors are fed into self-organizing nerual network. Finally, the center of the n-fold part is extracted by mean of generating and merging learning of the neurons. To accelerate the learning process, neural network uses an adaptive learning rate function to the merging process and a self-adjusting activation to generating process. Simulation results show that the centers of n-fold engineering parts are effectively estimated by proposed technique, though not knowing the error distribution of estimated centers and having less information of boundaries.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.237-241
• /
• 2001

The uncertainties associated with fluence calculation at the pressure vessel have been evaluated for the Korean Next Generation Reactor, APR1400. To obtain uncertainties, sensitivity analyses were performed for each of the parameters important to calculated fast neutron fluence. Among the important parameters to the overall uncertainties, reactor modeling and core neutron source were examined. Mechanical tolerances, composition and density variations in the reactor materials as well as application of $r-{\theta}$ geometry in rectilinear region contribute to uncertainty in the reactor modeling. Depletion and buildup of fissile nuclides, instrument error related to core power level, uncertainty of fuel pin burnup, and variation of long-term axial peaking factors are main contributors to the core neutron source uncertainty. The sensitivity analyses have shown that the uncertainty in the fluence calculation at the reactor pressure vessel is +12%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.283-288
• /
• 2003

The object of this study is to investigate a fracture characteristics of static tensile test as a function of acoustic emission according to the fiber orientation $\theta=0^{\circ}C$ in carbon/epoxy composites, CFRP. On tensile loading, it was recognized that the fracture characteristics of CFRP in a unidirectional composites. Using the results of the AE analysis(a=2mm), it was found that the amplitude distributions of AE signals corresponding the matrix cracking, fiber debonding or delamination, and fiber breaking are 55~70dB(<200sec), 100dB(200~600sec), and 80dB(>600sec).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.1 s.244
• /
• pp.48-56
• /
• 2006

We investigated gas residence time and mixing characteristics due to various swirl numbers generated by normal injection of secondary air to a lab-scale cylinderical combustor. The residence time was estimated by measuring the temporal pressure difference which was caused by deposition of test particles on a filter media after the injection by a syringe. The mixing characteristics were evaluated by standard deviation value of test gas concentration at different measuring points. The test gas concentration was detected by a gas analyzer. The swirl number of $20{\sim}30$ for ${\theta}=5^{\circ}$ caused long residence time enough to improve mixing characteristics. Numerical calculations were also carried out to understand physical meanings of the experimental results.