• Korean Journal of Veterinary Research
• /
• v.41 no.3
• /
• pp.269-273
• /
• 2001

The expression of protein kinase C(PKC) isoforms and nitric oxide synthase (NOs) isoforms was studied in the equine vomeronasal organ(VNO), a pheromone receptor organ, using immunohistochemistry. All PKC isoforms including PKC $\alpha$, ${\beta}I$, $\delta$, and $\theta$ were detected in the supporting cells, sensory receptor cells, and basal sensory epithelial cells, while constitutive PKC $\alpha$ and ${\beta}I$ were stained more intensely than novel PKC $\delta$ and ${\theta}$. There was also a varying degree of immunostaining for PKCs in the glandular acini and VNO nerve. Constitutive neuronal and endothelial NOSs, and inducible NOS were detected in the VNO sensory epithelia. There was intense immunoreactivity for endothelial NOS in the VNO sensory epithelia but weak reactivity for neuronal NOS, while inducible NOS showed little immunoreactivity in the adjacent section. These findings suggest that both PKCs and NOSs may be involved in the process of pheromone reception in the horse. Constitutive isoforms of these enzymes may play a more important role in signal trasduction in the VNO of the horse.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.22-26
• /
• 2001

Microstructures of AlN thin films on Si substrates grown by plasma assisted molecular beam epitaxy were analyzed with various growth temperatures and substrate orientations. Reflection high energy electron diffraction (RHEED) patterns were checked for the in-situ monitoring of the growth condition. X-ray diffraction(XRD), double crystal X-ray diffraction (DCXD), and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the microstructure of the films after growth. On Si(100) sub-strates, AlN thin films were grown mostly along the hexagonal c-axis orientation at temperature higher than $850^{\circ}C$. On the other hand the AlN films on Si(111) were epitaxially grown with directional coherencies in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112). The microstructure of AlN thin films on Si(111) substrates, with a full width at half maximum of almost 3000 arcsec at 2$\theta$=$36.2^{\circ}$, showed that the single crystal films were grown, even if they includ a lot of crystal defects such as dislocations and stacking faults.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.85-98
• /
• 2011

Objectives : The aim of this thesis is to examine the effect of acupuncture treatment at the GB37 on normal humans by using the power spectral analysis of the EEG. Methods : EEG (Electroencephalogram) power spectrum exhibits site-specific and state-related differences in specific frequency bands. In this thesis, the power spectrum was measured by the complexity. the 32 channels EEG study was carried out in the 13 subjects (12 males ; age=22.58 years old, 1 females ; 22 years old). Results : In the ${\alpha}$ (alpha) band, the power values at F7, F3, F4, F8, FTC2, C4, T4, CP1, CP2, TCP2, TT2, Pz, P4, Po1, Po2, O1, Oz, O2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the ${\beta}$ (beta) band, the power values at Cz, C4, T4, Tcp1, T6, Po1, O1, Oz, O2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the ${\delta}$(delta) band, the power values at Fp1, TT2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the $\theta$ (theta) band, the power values at Fp1, F8, FTC2, Pz channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. Conclusions : This results suggest that the acupuncture treatment at the GB37 significantly mostly change the power spectrum value on the alpha (18 channels), beta (9 channels) bands.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.130-137
• /
• 2003

This paper presents the problem of partitioning the Single-Stage Shuffle-Exchange Network(SSEN). An algorithm, named SSEN_to_PSEN, is devised to transform an SSEN into a Partitionable Shuffle-Exchange Network (PSEN). The proposed algorithm presents that the SSEN can be partitioned into independent sub-networks without additional links for N $\leq$ 8. Additional links are needed in order to partition an SSEN, but only when N $\geq$ 16. The running time of the algorithm SSEN_to_PSEN is $\theta$(NlogN). By comparing with a hypercube network, the PSEN is less expensive than a hypercube network even when some additional links are added. By partitioning, a large PSEN in a massively parallel machine can compute various problems for multiple users simultaneously, thereby the processing efficiency of the machine is improved.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.155-156
• /
• 2008

This research measures EEG signals which are generating on head skin and extracts brain concentration level related with brain activity. We develop concentration wireless transmission system for controlling hardware by using this signal. Two channels are used for measuring EEG signal on front head and Biopac system with MP-100 and EEG100C was used for measuring EEG signal, amplifying and filtering the signal. LabView 8.5 was also used for FFT transformation, frequency and spectrum analysis of the measure EEG signal. As a result, ${\alpha}$ wave, ${\beta}$ wave, ${\theta}$ wave and ${\delta}$ wave were classified. we extracted the concentration index by adapting concentration extraction algorithm. This concentration index was transferred into lego automobile device by wireless module and applied for BCI application.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.75-79
• /
• 2003

YBCO films were deposited with various thicknesses from 100nm to 1.6$\mu\textrm{m}$ on single crystal $SrTiO_3$ substrates by pulsed laser deposition (PLD). The effects of different deposition conditions, especially different deposition rates by means of changing the pulsed laser frequency up to 200Hz, on the J$_{c}$ value were studied. For YBCO film with the thickness of 200nm, the $J_{c}$ value of $2.1MA/\textrm{cm}^2$ has been achieved under the high deposition rate of 3.2nm/s (190nm/min). The $J_{c}$ can be maintained greater than $1M/\textrm{cm}^2$ with the thickness less than 1$\mu\textrm{m}$. The X-ray analysis was used to examine the texture, crystallization and surface quality. The SEM was employed to analyze the surface of YBCO, and it was shown the surface of YBCO film became rougher with increasing the thickness. There were many large singular outgrowths and networks of outgrowths on the surface of YBCO films which lowered the density of thick YBCO film. The outgrowth network was probably the a-axis YBCO corresponding to XRD $\theta$-2$\theta$scan and $\chi$-scan which were used to characterize a-axis orientation of YBCO film. The reason for J$_{c}$ declining with increasing the thickness was studied and discussed.sed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.701-708
• /
• 2011

Natural convection heat transfers on inclined flat plates were measured for Grashof numbers of $8.06{\times}10^7$ and $3.45{\times}10^9$ by using a copper sulfate electroplating system. The inclinations of the plates were varied from upward-facing horizontal to downward-facing horizontal. Test results for the downward-facing plate agree well with the existing theory that the Nusselt number can be calculated by replacing gravitational acceleration, g with g $cos{\theta}$ in the heat transfer correlation for the vertical plate. The natural convection flows for the upward-facing plate follow two distinct flow regimes: boundary layer regime and flow separation regime. The copper plating pattern for the upward-facing plates clearly reveals the flow separation points.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.510-521
• /
• 2008

In the study, experiments are performed in the interaction region combined with wave and current to investigate the characteristics of local scour around submarine pipelines. Wave generator and current generator are used for the experiments and two current directions were used; co-direction and counter direction to the wave. The local scour depths around the pipeline are obtained according to the various pipe diameters(D), wave periods(T), wave heights(H), and current velocities(V). The experiments show that the maximum equilibrium local scour depth increases with pipe diameter, wave period, wave height, and current velocity. Using the experimental results, the correlations of scour depth and parameters such as Shields parameter($\theta$), Froude number(Fr), period parameter, Keulegan-Carpenter number(KC), Ursell number($U_R$), modified Ursell number($U_{RP}$) and ratio of velocities($U_{c}/(U_{c}+U_{m})$) are analyzed. In the interaction region combined with waves and currents, Froude number and Shields parameter are found the main parameters to cause the local scour around the submarine pipelines and this means that current governs the scour within any limits of the currents.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.386-393
• /
• 1998

We have carried out the measurements of complex dielectric constants with impedance/gain-phase analyzer using capacitor method and the experiments of high temperature X-ray powder diffraction with X-ray diffractometer using ${\theta}-2{\theta}$ scan method for the KTP single crystal which has the premium nonlinear optical properties. From the results of high temperature X-ray powder diffraction experiments, we have found that KTP does not undergo structural phase transition below $900^{\circ}C$. It is clear that KTP undergoes structural phase transition around $900^{\circ}C$ and belongs to orthorhombic above $900^{\circ}C$ still. However, we have applied phenomenological relation of dielectric relaxation to the results of complex dielectric measurement and have found that relaxation mechanism of KTP well satisfies the Cole-Cole relation over the temperature range from $-78^{\circ}C$ to $200^{\circ}C$. And also the relaxation time well satisfies the Vogel-Fulcher relation. It is regarded that the hopping and thermally activated diffusion mechanism may control the conduction behavior of KTP above $200^{\circ}C$.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.132-138
• /
• 2008

We investigated the biomechanical properties of a newly designed self-expansion type anterior cruciate ligament (ACL) anchor. The ACL anchor consists of the ring section giving the elastic force, the wedge for maintaining in contact with the femur tunnel wall and the link suspending hamstring graft or artificial ligament. The main design parameters that determine the performance of this device were the expansion angle (${\theta}$) and the thickness ($t_R$). The Ti6Al4V anchors were heated after inserting in a jig for 1 hour at $800^{\circ}C$ in a protective argon gas atmosphere and allowed to cool to room temperature in the furnace. In order to investigate the influence of the expansion angle and the thickness of the ring on the biomechanical properties of the anchor, the maximum pull-out load, stiffness and slippage of the ACL anchor were measured using the pull-out tester, and statistical analyses were also executed. The present results showed that the design parameters gave a significant effect on the performance of the self- expansion type of anchor. The pull-out load of the ACL anchors significantly increased as the thickness of the ring section was increased, having a similar trend for both expansion angles. The ACL anchor showed about 2.5 times higher values of the pull-out load than that of the minimum load (500N)required for the "accelerated rehabilitation". The optimum ${\theta}$ and $t_R$ values of this ACL anchor were suggested to have sufficient resistance against the pull-out force, high stiffness and relatively low slippage after ACL reconstruction.