• Title/Summary/Keyword: $TeO_2$

Search Result 334, Processing Time 0.026 seconds

유리반도체

  • 박창엽
    • 전기의세계
    • /
    • v.24 no.4
    • /
    • pp.6-10
    • /
    • 1975
  • 반도체와 그의 응용소자는 지난 20여년간 눈부식 발전을 이룩하였다. 이는 주로 단결정의 제작기술 진보에 의한 것으로 본다. 그러나 최근 단결정과는 전연 다른 유리질반도체가 국제회의에서도 그 우수성을 의논하기에 이르렀다. 유리질 반도체가 주목을 끌게 된겻은 1968년 Ovshinsky가 "무질서 구조에 있어서 가역적 스위칭현상"이라는 논문이 발표되고 유리질 반도체를 사용한 Ovonic 스위칭 소자의 출현에 기인된다. 유리질 반도체가 전기스위칭 작용, 기억작용을 나타낸다고 하는 Ovshinsky의 발표는 전자제치로서의 응용에 대해 찬반되는 의견이 있었지만 물성적 연구의 교량적인 역할을했다고 할 수 있다. 이런 반도체에 속하는 재료는 호칭도 여러가지로 유리질반도체, 비정질반도체 무정형반도체등으로 불리어진다. 단결정체가 각 격자간에 장거리질서를 갖는 반면 유리질 반도체는 무질서한 구조로 각 격자간에 단거리 질서를 갖는 것이 단결정과는 본질적으로 다른 점이라 본다. 유리 반도체의 종류는 첫째, 원소성 유리반도체로서 Ge, Si, Se, Te 들과 같이 단일원소로 된 겻과, 둘째 IV, V, VI족 원소로 된 공유결합 합금인 As$_{2}$Se$_{3}$-As$_{2}$Te$_{3}$ 계 Ge Si As Te계등의 칼코게나이드 유리등으로 금지대는 어느 것이나 2eV이하이다. 셋째 이론결합인 SiO $Al_{2}$O$_{3}$ Ta$_{2}$O$_{3}$Si$_{3}$N$_{4}$등의 산화물 및 질화물로 대표되는 분자성 비정질 물질로서 금지대는 2eV보다 큰 세종류로 크게 분류할 수 있다. 분류할 수 있다. 한다. 단 개개의 문제에 관한 구체적인 해석 또는 검토에 관하여는 다음 기회에 미루기로하고, 우선 여기서는 당면문제로서 대처하지 않으면 안될 자동주파수제어문제및 계통의 경제운용문제만에 한정하여, 이것을 우리나라의 현상과 관련시켜 개설하고, 이들의 자동화에 관한 기본적인 문제를 간단히 적어 보겠다. 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을

  • PDF

Fabrication of Low Loss Silica Slab Waveguide by Flame Hydrolysis Deposition (FHD 공정에 의한 저손실 실리카 슬랩 도파로 형성)

  • 심재기;김태홍;신장욱;박상호;김덕준;성희경
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.6
    • /
    • pp.524-529
    • /
    • 2000
  • Silica slab wavegudie was fabricated on Si substrates by FHD for planar optical passive devices. The slab waveguide consists of lower clad and core layers, where core layer index is controlled by GeO2 addition. Doping of GeO2 in silica is difficult because of the low deposition density due to nonspherical particle generation in FHD process. Silica core particles deposited at various conditions such as flame temperature and substrate scanning were analyzed by SEM and TEM. As the flame temperature increased, the surface roughness of the core layer was decreased up to 3.6 nm after consolidation. Index difference and thickness of core of slab waveguide were 0.3%, 8$\mu\textrm{m}$ respectively. Measured optical loss at TE mode was <0.04 dB/cm at 1.3$\mu\textrm{m}$ and <0.06 dB/cm at 1.55$\mu\textrm{m}$.

  • PDF

Antibiotic Susceptibility of Salmonella spp. Isolated From Diarrhoea Patients in Seoul From 1996 to 2001 (서울 시내 설사환자에서 분리한 살모넬라의 항생제 감수성의 년도별 변화 추이)

  • 박석기;박성규;정지헌;진영희
    • Journal of Food Hygiene and Safety
    • /
    • v.17 no.2
    • /
    • pp.61-70
    • /
    • 2002
  • In order to investigate the classification and antibiotic resistance of Salmonella species,718 isolates were isolated from patient in Seoul from 1996 to 2001. The two hundred and ninety eight isolates (41.5%) were identified as Sal. Enteritidis, followed by Sal. Typhi 218 isolates (30.4%), and Sal. Typhimurium 87 isolates (12.1%). The identified Salmonella species were most resistant to tetracycline (32.7%), followed by streptomycin (28.0%), ticarcillin (18.1%) and ampicillin (12.4%). Among isolates,34.7% of Sal. Enteritidis were resistant to tetracycline, 32.3% to streptomycin,23.2% to ticarcillin,13.5% to ampicillin, respectively. 13.8% of Sal. Typhi were resistant to streptomycin,10.6% to tetracycline, respectively.66.7% of Sal. Typhimurium were resistant to tetracycline, 42.5% to streptomycin, 28.7% to ticarcillin, 26.4% to ampicillin and 17.2% to chloramphenicol, respectively. Of 718 isolates, 324 isolates (45.1%) were resistant to 1 or more drugs and 64 isolates (19.8%) were resistant to 1 drug, 132 isolates (40.7%) were resistant to 2 drugs,50 isolates (15.4%) were resistant to 3 drugs, 27 isolates (8.3%) to 4 drugs,27 isolates (8.3%) to 5 drugs,22 Isolates (6.8%) to 6 drugs. The most prevalent multiple resistant pattern was tetracycline-kanamycin (35.5%), followed by tetracycline-kanamycin-ticarcillin (8.3%), and tetracycline-kanamycin-ticarcillin-ampicillin (7.4%) . Antibiotic resistant rate of Sal. Typhimurium was 73.6%,1311owe4 by Sal. Enteritidis 53.7% and Sal. Typhi 19.3%. Most Sal. Enteritidis was resistant to 1 drug o.2 drugs, whereas Sal. Typhi. and Sal.. Typhunurium were more .resistant to 5 (16.7%) or 6 drugs (26.6%). The old generation antibiotics such as ampicillin, tetracycline, and streptomycin were annually more resistant than the new generation antibiotics such as ceftriaxone, ciprofloxacin or cefoxitin.

Structural Properties of chemically deposited CdS Films on plasma treated PET (고밀도 산소 플라즈마 처리된 폴리머 기판에 성장시킨 CdS 박막의 특성 분석)

  • Song, Woo-Chang;Park, Seung-Beom;Lim, Dong-Gun;Lee, Jae-Hyeong;Park, Jong-Kuk;Park, Ha-Yong;Kim, Jeong-Ho
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.06a
    • /
    • pp.228-228
    • /
    • 2008
  • CdS is II-VI semiconductor with a wide band gap of approximately 2.42 eV. CdS is the most popularly employed heterojunction partner to p-CdTe due to its similar chemical properties. In this work, to improvement of the surface properties of the CdS films, PET substrate is treated by high density $O_2$ plasma. CdS films are prepared by chemical bath deposition(CBD) method. In case of the PET substrate with plasma treatment for 2min, the crystalline orientation of CdS films exhibits a strong hexagonal(002). Grain size was increased from 300nm without $O_2$ plasma treatment to 380nm with an $O_2$ plasma treatment.

  • PDF

A Study on the Low-Temperature Sintering Characteristic of the Mg-Zn ferrite which added CuO (CuO를 첨가한 Mg-Zn 페라이트의 저온소결 특성에 관한 연구)

  • Kwon, Oh-Heung;Kim, Do-Hwan;Choi, Young-Ji
    • Resources Recycling
    • /
    • v.14 no.3
    • /
    • pp.63-67
    • /
    • 2005
  • As there are recent tendencies to raise horizontal frequencies so as to improve screen definition for high-quality TV and high definition display, ferrite core for deflective yokes requires materials with low coreloss in the areas of high frequencies. The researcher added CuO to low-loss Mg-Zn ferrite. After choosing MgO, ZnO, Fe$_2O_3$ and CuO, the researcher changed a ratio of composition, substituting MgO for CuO. These samples were sintered for three hours up to 980$^{\circ}C$~1350$^{\circ}C$. Measure magnetic permeability, electric loss, core loss and a rate of contraction.

Effects of post-annealing temperature of CeO$_2$ buffer layers on the surface morphology, structures and microwave properties of YBa$_2$Cu$_3$O$_{7-{\delta}}$ films on sapphire

  • Yang, W.I.;Lee, J.H.;Ryu, J.S.;Ko, Y.B.;Chung, Y.S.;Hur, Jung;Lee, Sang-Young
    • 한국초전도학회:학술대회논문집
    • /
    • v.10
    • /
    • pp.201-206
    • /
    • 2000
  • Effects of the post-annealing temperature of CeO$_2$ buffer layers on the properties of YBCO films on CeO$_2$-buffered sapphire were investigated. 45 nm-thick CeO$_2$ buffer layer was prepared in-situ on r-cut sapphire using an on-axis rf magnetron sputtering method, which was later post-annealed at temperatures between 950$^{\circ}$C and 1100$^{\circ}$C in an oxygen-flowing environment. YBCO films were prepared on CeO$_2$-buffered sapphire (CbS), for which the surface morphology, crystal structures and electrical properties of the YBCO films were studied. YBCO films on post-annealed CbS appeared to have better properties than those on as-grown CbS with regard to the morphological, structural and electrical properties when the YBCO films were prepared on CeO$_2$ buffer layer post-annealed at temperatures of 1000 - 1050$^{\circ}$C. A TE$_{011}$ mode rutileloaded cylindrical cavity resonators was fabricated with the YBCO films placed as the endplates, for which the unloaded Q of the resonator was measured. It turned out that the resonator with the endplates prepared from the YBCO films on postannealed CbS at 1000 $^{\circ}$C showed the highest unloaded Q with the value more than 8 ${\times}$ 10$^5$ at 30 K and 8.6 CHz, revealing that the YBCO films on post-annealed CbS at 1000$^{\circ}$C the temperature could be the lowest among the YBCO films on post-annealed CbS.

  • PDF

The Treatise research about Acupuncture Point for Symptoms of Headache (두통(頭痛)의 침구치료혈(鍼灸治療穴)에 관(關)한 문헌적(文獻的) 고찰(考察))

  • Park, Sung Ho;Lee, Byung Ryul
    • Journal of Haehwa Medicine
    • /
    • v.11 no.1
    • /
    • pp.111-135
    • /
    • 2002
  • The result as following one was founded that investigate cause and acupuncture point for symptoms of headache, 1. Headache in distinction from doo-pung(頭風) was defined that it' period is short and treatment is easy. 2. The cause of headache was classified according to the interior and exterior cause of the body. 3. Total number of used acupuncture point was one hundred and six, and in order of using time acupuncture point was appeared as LI4(15), LU7(12), GB20(12), BL2(11), GV20(9), TE23(9), SI3(7), GV24(7), GV23(7) 4. The meridian distribution of acupuncture point is appeared as Bladder Meridian(21points), Gallbladder Meridian(18points), Governer vessel(14points), Triple Energizer meridian(12points), Large Intestine Meridian(9points), Small Intestine Meridian(7points), Stomach Meridian(7points) 5. According to headache position, the distribution of acupuncture point was appeared that $Yangmy\breve{o}ng$ $Ky\breve{o}ng$ and Governer vessel was used to frontal headache, Soyang $Ky\breve{o}ng$ to migraine, Taeyang $Ky\breve{o}ng$ and Governer vessel to occipital headache. 6. LI4(合谷) and LU7(列缺) was used to general headache as basic acupuncture point.

  • PDF

A closer look at the structure and gamma-ray shielding properties of newly designed boro -tellurite glasses reinforced by bismuth (III) oxide

  • Hammam Abdurabu Thabit;Abd Khamim Ismail;N.N. Yusof;M.I. Sayyed;K.G. Mahmoud;I. Abdullahi;S. Hashim
    • Nuclear Engineering and Technology
    • /
    • v.55 no.5
    • /
    • pp.1734-1741
    • /
    • 2023
  • This work presents the synthesis and preparation of a new glass system described by the equation of (70-x) B2O3-5TeO2 -20SrCO3-5ZnO -xBi2O3, x = 0, 1, 5, 10, and 15 mol. %, using the melt quenching technique at a melting temperature of 1100 ℃. The photon-shielding characteristics mainly the linear attenuation coefficient (LAC) of the prepared glass samples were evaluated using Monte Carlo (MC) simulation N-particle transport code (MCNP-5) at gamma-ray energy extended from 59 keV to 1408 keV emitted by the radioisotopes Am-241, Ba-133, Cs-137, Co-60, Na-22, and Eu-152. Furthermore, we observed that the Bi2O3 content of the glasses had a significantly stronger impact on the LAC at 59 and 356 keV. The study of the lead equivalent thickness shows that the performance of fabricated glass sample with 15 mol.% of Bi2O3 is four times less than the performance of pure lead at low gamma photon energy while it is enhanced and became two times lower the perforce of pure lead at high energy. Therefore, the fabricated glasses special sample with 15 mol.% of Bi2O3 has good shielding properties in low, intermediate, and high energy intervals.

A Comparative Study for the Microwave Surface Resistances of $YBa_2$$Cu_3$$O-{7-$\delta$}$ Films Measured with a Microstrip Resonator and a Inutile-loaded Cavity Resonator (마이크로스트립 공진기와 Rutile-loaded Cavity 공진기로 측정한 $YBa_2$$Cu_3$$O-{7-$\delta$}$박막의 마이크로파 표면저항 비교 연구)

  • O. K. Kwon;H. J. Kwon;Lee, J. H.;Jung Hur;Lee, Sang-Young
    • Progress in Superconductivity
    • /
    • v.2 no.2
    • /
    • pp.86-91
    • /
    • 2001
  • Temperature dependences of the unloaded Q(Q$_{0}$) and the resonant frequency ( $f_{0}$) of YB $a_2$C $u_3$ $O_{7-{\delta}}$ (YBCO) microstrip ring resonators and rutile-loaded cylindrical cavity resonators were measured at low temperatures. Dc magnetron-sputtered YBCO films grown on Ce $O_2$-buffered r-cut sapphire (CbS) substrates were used fur this purpose. The surface resistances ( $R_{s}$) of YBCO films measured by both a microstrip ring resonator and a TE $01\delta$/ mode rutile-loaded cylindrical cavity resonator are compared with each other. It turned out that the values of $R_{s}$ measured by the microstrip resonator technique are comparable to those by the rutile-loaded resonator technique at temperatures lower than ~50 K. However, above 50 K, the $R_{s}$ measured by the microstrip resonator technique appeared higher according to the temperature. Our results show that the current crowding effects near the edge of a microstrip resonator become more significant at temperatures near the critical temperature.emperature.e.e.e.e.e.e.

  • PDF

Dyeing of Silk Fabrics Using Charcoals (숯을 이용한 견직물의 염색)

  • Jo, Won-Joo;Lee, Jeong-Sook
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.29 no.2
    • /
    • pp.279-285
    • /
    • 2005
  • In order to activate the characteristics of charcoals in fiber systems, this study was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on silk fabrics. The results obtained were as follows; The silk fabrics were dyed with gray color by charcoals effectively. The K/S value, that is indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Te dyeing effects were the highest with 50%(o.w.f.) of charcoals at $100^{\circ}C$ for 120 minutes in this experiments, It was observed the surfaces of silk fibers were mainly adcorbed with charcoal powders of the particle size from two micrometers to four micrometers by scanning electron microscope. Dyed silk fabrics showed comparatively low fastness to the fade of launding, the stain of the treatment of perspirations, and the strain of water fastness test, but good fastness to the stran of laundering, te drycleaning, the fade of treatment of perspirations, and the fade of water fastness test. In connection with the functional properties of dyed fabrics, the deodorizations were drastically improved, and the far-infrared emissions improved highly, and also the antibacterials were comparatively good.