• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.451-465
• /
• 1987

With the introduction of ISDN network, the D channel protocol has bee defined as a signalling method for ISDN user-network interface. Therefore the NT2(Network Termination 2) which carry out concentration and switching function, must process the D channel related information. This paper describes how the D channel protocoal is applied and implented in a small ISDN subscriber concentrating system that has NT2 functions. The application protocol proposed is addressed taking into consideration the compatibility with ISDN standard facilities, TE(Terminal Equipment) or ET(Exchange Terminator), This protocol has been implementes using a general multitask operating system and it has the features of the minimized information processing and the simpified algorithm which are suitable for a small system. Its application programs are divided into various tasks to facilitate the addition and the modification of function. In this paper, we briefly outline the protocol defined in CCITT and show the application protocol that has fitted in a small concentrating system with NT2 functions. Also we present the experimental results and implementation method of this protocol.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.285-289
• /
• 2015

We prepared silver Schottky contacts to O-polar and nonpolar m-plane bulk ZnO wafers. Then, by considering various transport models, we performed a comparative analysis of the current transport properties of Ag/bulk ZnO Schottky diodes, which were measured at 300, 200, and 100 K. The fitting of the forward bias current-voltage (I-V) characteristics revealed that the tunneling current is dominant as the transport component in both the samples. Compared to thermionic emission (TE), a stronger contribution of tunneling current was observed at low temperature. The reverse bias I-V characteristics were well fitted with the thermionic field emission (TFE) in both the samples. The presence of acceptor-like adsorbates, such as O₂ and H₂O, modulated the surface conductive state of ZnO, thereby affecting the tunneling effect. The degree of activation/passivation of acceptor-like adsorbates might be different in both the samples owing to their different surface morphologies and surface defects (e.g., oxygen vacancies).

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.131.2-131.2
• /
• 2007

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.58-66
• /
• 2002

Acousto-optical wavelength tunable optical filters in LiNbO$_3$ have been demonstrated using taperd directional weighted coupling acoustic waveguides and Ti double diffusion technique. Conversion efficiency in excess of 61%, 86% and sidelobe intensity of -14.29㏈, -14.99㏈ were measured at a wavelength of 1551.1nm RF frequency of 173.58MHz and RF power of 35㎽ for both TE and TM input polarizations, respectivelv. A spectral width of ~l.8nm and linear tuning late of 8.6nm/MHz were demonstrated. A 2.82$mutextrm{s}$ switching time has been measured. With two channels with 2.5nmseparation, channel cross-talk was lower than -l4㏈ for single wavelength filtering due to sidelobe.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.231-236
• /
• 1999

냉각속도가 재열처리가 AFD 방법에 의해 제작된 76SiO2-14B2O3-6Na2O-4Al2O3 유리박막의 광학적 특성에 미치는 영향을 조사하였다. 유리박막의 열팽창계수는 30$0^{\circ}C$부터 전이온도 사이에서 약 5$\times$10-6/$^{\circ}C$이었으며, 전이온도는 62$0^{\circ}C$였다. 유리박막을 전이온도 이하에서 열처리할 경우 열처리 시간이 증가함에 따라 굴절률은 증가하였으며, 열처리 온도가 증가함에 따라 굴절률의 증가속도는 더 컸다. 열처리온도에 따른 유리박막의 복굴절(TE-TM)감소는 굴절률이 가장 크게 증가하는 온도인 $600^{\circ}C$에서 가장 효과적이다. 한편, 냉각속도가 증가함에 따라 유리박막의 두께는 증가하였으며, 굴절류른 감소하였다.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.106-111
• /
• 2010

Sapphire resonators with $YBa_2Cu_3O_{7-\delta}$ (YBCO) endplates have provided a way to realize extremely high quality factor due to the extremely low dielectric loss of sapphire and conductive loss of YBCO films, which enables to measure the low surface resistance of superconductor films at microwave frequencies. We present microwave properties of HTS sapphire resonators designed for measuring the surface resistance of HTS films at millimeter-wave frequencies by using the two-resonance mode dielectric resonator method. Despite enhanced surface resistance ($R_S$) of YBCO films due to the quadratic frequency dependence of the $R_S$, the unloaded quality factor ($Q_0$) of the $TE_{021}$ mode sapphire resonator still appears to be well above $1\;{\times}\;10^6$ at a mm-wave frequency of 38 GHz at 10 K. However, it appears that the $TE_{012}$ mode $Q_0$ is unexpectedly low despite that the corresponding resonance peak looks uncoupled with parasitic modes. We discuss possible reasons for the unexpected results using the surface resistance at the $TE_{021}$, $TE_{012}$, and $TE_{011}$ mode frequencies.

• The Journal of the Korean Society for Microbiology
• /
• v.20 no.1
• /
• pp.79-89
• /
• 1985

It is important to discriminate between tuberculosis and tuberculosis-like disease by Mycobacteria other than tuberculosis in the serodiagnosis of tuberculosis. But because common antigens share among Mycobacteria, their antigenicities to human are similar. Therefore degree of cross-reactivity of antibody in the sera of patients with tuberculosis between M. tuberculosis and Mycobacteria other than tuberculosis should be checked to increase the specificity in the serodiagnosis of tuberculosis. The activity levels of IgG antibody in the sera of 106 patients confirmed as active pulmonary tuberculosis and 30 normal healthy control person to the pressate extract antigen (TE, BE, AE, and FE antigen) from M. tuberculosis, M. bovis, M. avium, and M. fortuitum were measured by enzyme-linked immunosorbent assay and the crossreactivity of IgG antibody with mycobacterial species was analysed. The results were as follows; 1. The activity level(O.D. at 492nm) of IgG to TE antigen in sera of patients with pulmonary tuberculosis was $0.228{\pm}0.167$ in minimal tuberculosis; moderately advanced, $0.556{\pm}0.616$; far advanced, $1.116{\pm}0.651$ and $0.315{\pm}0.245$ in miliary tuberculosis. 2. The activity level (O.D. at 492nm) of IgG to BE antigen in sera of patients with pulmonary tuberculosis was $0.190{\pm}0.162$ in minimal tuberculosis; moderately advanced, $0.337{\pm}0.361$; far advanced, $0.713[\pm}0.460$ and $0.204{\pm}0.162$ in miliary tuberculosis. 3. The activity level (O.D. at 492nm) of IgG to AE antigen in sera of patients with pulmonary tuberculosis was $0.165{\pm}0.114$ in minimal tuberculosis; moderately advanced, $0.392{\pm}0.494$; far advenced, $0.751{\pm}0.512$ and $0.233{\pm}0.191$ in miliary tuberculosis. 4. The activity level (O.D. at 492nm) of IgG to FE antigen in sera of patients with pulmonary tuberculosis was $0.280{\pm}0.227$ in minimal tuberculosis; moderately advanced, $0.460{\pm}0.564$ ; far advanced, $0.845{\pm}0.573$ and $0.257{\pm}0.103$ in miliary tuberculosis. 5. The activity level (O.D. at 492nm) of IgG in sera of healthy control person was $0.126{\pm}0.084$ to TE antigen. $0.105{\pm}0.041$ to BE antigen, $0.103{\pm}0.052$ to AE antigen, and $0.095{\pm}0.061$ to FE antigen. 6. Degree of correlation(r) in activity level of IgG between TE antigen and BE antigen was 0.905 ; between TE antigen and AE antigen, 0.760; between TE antigen and FE antigen, 0.790, and between AE antigen and FE antigen, 0.945. 7. As O.D. above 0.200 was determined positive for the serodiagnosis of pulmonary tuberculosis, the sensitivity and specificity in ELISA using TE antigen were 80% and 87% respectively, whereas in the case of using BE antigen, 66% and 100%; in the case of using AE antigen, 62% and 100%, and in the case of using FE antigen, 72% and 93%, respecitively.

• Korean Journal of Materials Research
• /
• v.12 no.10
• /
• pp.809-813
• /
• 2002

Commercial nano crystalline $TiO_2$ powders were used to characterize photocatalyst, using thermal spray coating technique. The microstructure of coating layers were examined by SEM, FE-SEM and TEM. Also the cross sectional areas of TiO$_2$ coating layers were observed by SEM. The phases were analyzed by X-ray diffraction methed. Surface roughness and hardness were measured. It was found that phase transformation from anatase to rutile occurred, and the melted splats are all rutile, and unmeted nano particles were anatase. These unmelted anatase phase may enhance te play a role of photocatalyst.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.137-143
• /
• 2003

In measuring the microwave surface resistance of high-Tc superconductor (HTS) films using the dielectric-loaded cavity resonator method, one of the most important factors that limit the measurement sensitivity is the measurement error in the loss tangent ($tan\delta$) of the dielectric rod placed inside the cavity. We have measured the effective surface resistance ( $R_{S}$ $^{eff}$) of$ YBa_2$$_Cu3$$_{7-{\delta}}$ (YBCO) films and the $tan\delta$ of rutile ($TiO_2$) using the 'two-tone'method suggested by Kobayashi et at. [IEEE, MTT-S Digest, 495, (2001)], which enables simultaneous measurements of both the $R_{S}$ $^{eff}$ fof HTS films and the $tan\delta$ of the rutile with high sensitivity. A rutile-loaded cavity resonator with the $TE_{012}$ and $TE_{021}$ resonant frequencies at 13.67 - 14.01 GHz is used for this purpose. At temperatures where the two modes do not couple with other modes, the $R_{S}$ $^{eff}$ of YBCO films and $tan\delta$ of rutile measured by the two-tone method appear to match well with the corresponding values measured using the reported $tan\delta$ values of sapphire within 10 %. Usefulness of the 'two-tone' method for microwave characterization of HTS films and dielectrics is discussed.d.ielectrics is discussed.ussed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.292-297
• /
• 2003

A diode-pumped single-mode Nd:YV $O_4$ green laser was developed. Frequency doubling of the laser was achieved by using an intracavity KTP generated green beam (532 nm). By comparing the diode laser spectrum with absorption spectrum of the Nd:YV $O_4$ crystal, we found optimal operating temperature of the diode laser. From output power measured for various mirror curvatures and cavity lengths, we found the optimal matching of TE $M_{00}$ mode with the pump beam gives the best efficiency. When the pump power was 1.9 W, 80 ㎽ of TE $M_{00}$ mode green beam was obtained. We tried to get a single longitudinal mode lasing as the fluctuation of the laser power was caused by the shift of longitudinal modes and the beating between the modes. We tested the intracavity etalon method and birefringent filter method for single mode operation. The etalon method resulted in the best single mode output power of 60 ㎽. The power fluctuation of the single-mode laser was reduced to 1/10 of that of the multi-mode laser.