• 제목/요약/키워드: $T_2$-phase

검색결과 1,999건 처리시간 0.033초

전자식유량계를 활용한 홀스타인 젖소의 비유형질 분석 (Analysis of Daily Milking Flow in Holstein Dairy Cow Using the LactoCorder)

  • 조광현;최준표;유병화;이득환;공홍식;박경도;이학교
    • Journal of Animal Science and Technology
    • /
    • 제51권4호
    • /
    • pp.265-272
    • /
    • 2009
  • 본 연구는 임실군 관내 16농가를 선정하여 총 486두에 대한 비유기록을 수집하였으며, 얻어진 결과는 다음과 같다. 평균 비유개시 3분이내 유량(3MG)은 7.44 kg으로 총 유량의 55%가 3분이내에 비유되는 것으로 나타났고 평균 우유속 거품함량(SPL)은 33.93%였으며, 평균 후착유 유량은(MNG)은 0.14 kg으로 총 유량의 1%에 불과하였다. 순간최고유속(HMF), 분당최고유속(HMG)과 주착유시평균유속(DMHG)에 대한 평균치는 각각 3.03 kg/min, 2.94 kg/min과 2.05 kg/min으로 임실군 젖소군의 비유속도는 대체적으로 느린 것으로 조사되었다. 비유개시부터 유속 500 g/min 도달시간(tS500)은 평균 0.23분(약 14초) 이었으며, 총비유 시간(tMGG)의 평균은 7.75분이었다. 평균 과착유소요시간(tMBG)은 0.58분(35초) 이었으며, 후착유소요시간(tMNG)은 평균 0.42분(14초) 걸리는 것으로 조사되었다. 최고유속시 전기전도도(ELHMF)와 비유개시시 최고전기전도도(ELAP)의 평균은 각각 6.81 mS/cm와 7.58 mS/cm로 조사되었고 최고유속이후 최고전기전도도(ELMAX)는 평균 7.48 mS/cm로 나타났으며, 비유초기와 최고유속의 전기전도도 차이(ELAD)는 평균 0.61 mS/cm로 나타났다. 총비유량은 주착유시 평균유속(DMHG), 주착유시간(tMHG), Plateau 비유 소요시간(tPL), 비유하강기 소요시간(tAB)과 총착유 시간(tMGG)에 대하여 0.35~0.54 범위의 정(+)의 상관관계를 나타낸 반면, 과착유시간(tMBG)과 우유속 거품함량(SPL)과는 각각 -0.11과 -0.27의 부(-)의 상관을 나타내었다. 주착유시 평균유속(DMHG)이 증가하면 총비유시간(tMHG), Plateau 비유 소요시간(tPL), 비유하강기 소요시간(tAB), 총비유시간(tMGG)과 우유속 거품함량(SPL)은 감소하는 것으로 나타났다. 비유개시시 전기전도도가 높은 개체의 우유는 체세포 수가 적은 반면 최고 비유기 이후 최고전도도가 높은 개체의 우유는 체세포 수가 높은 것으로 나타났다. 따라서 비유상태를 정기적으로 점검하고 착유 및 비유에 대한 표준안을 바탕으로 착유를 실시하면 유량과 유질의 향상을 기대할 수 있다고 판단되었다.

광합성 세균을 이용한 고농도 양돈슬러리의 무취화 관리방안에 관한 연구 (Deodorization Management of Swine-Slurry by Addition of Phototrophic Bacteria)

  • 이명규;권오중;정진영;태민호;허재숙
    • 한국축산시설환경학회지
    • /
    • 제4권2호
    • /
    • pp.137-147
    • /
    • 1998
  • This study was carried out to find deodorization effect of swine-slurry by addition of phototrophic bacteria(PTB). The pilot-scale reactors operation conditions was designed by the inoculum amounts of PTB and light-conditions. Treatment conditions was divided into 3 types; 106 MPN/ml$.$Dark(T-1), 108 MPN/ml$.$Dark(T-2), 108 MPN/ml$.$Natural light(T-3). The changes of the concentration of volatile fatty acids(VFAs), hydrogen sulfide(H2S), ammonia (NH3) and odor intensity were analyzed during the treatment period(35 days). From results of this study, the maximum intensity of odor in the headspace of the reactor T-1 was 4.82 and T-2, T-3 was 2.63, respectively. In swine-slurry of reactors used, it almost took 10 days until to be stabilized with solid and liquid phase. Intensity of odor in headspace was mainly derived from the liquid phase. The PTB inoculum method to swine-slurry was very effective in reduction of VFAs, H2S and Sulfate-reducing bacteria(SRB) concentration. Expecially, It was interested in reverse growth behaviour of SRB and PTB in these conditions.

  • PDF

분상법을 이용한 봉규산염계 다공질 유리의 제조 및 특성;$ZrO_2$와 MgO 첨가 영향 (Preparation and Characterization of Porous Glass in $Na_2O-B_2O_3-SiO_2$ System ; Addition Effects of $ZrO_2$ and MgO)

  • 김영선;최세영
    • 한국세라믹학회지
    • /
    • 제32권3호
    • /
    • pp.385-393
    • /
    • 1995
  • Akali-resistant porous glass was prepared by phase separation in Na2O-B2O3-SiO2 system containing ZrO2 and MgO. ZrO2 was added for alkali-resistance and MgO for anti-cracking during leaching. Optimal content of ZrO2 for alkali-resistance was 7wt% and devitrification by heat treatment resulted from further addition. Pore size and pore volume were decreased and specific surface area was increased with ZrO2 addition due to depression in phase separation. Addition of 3mol% MgO to mother glass containing 7wt% ZrO2 was effective for anti-crack during leaching. In this case, with phase separation at 55$0^{\circ}C$ and 5$25^{\circ}C$ for 20 hrs. crack-free porous glasses could be prepared. The relation between pore size r and heat treatment time t at 55$0^{\circ}C$ was D=25.58+18.16t. According to measurement of gas permeability, the mechanism of gas permeation was Knudsen flow. N2 and He permeability of porous glass which was prepared by heat treatment at 55$0^{\circ}C$ for 20 hrs. were 0.843$\times$10-7mol/$m^2$.s.Pa and 2.161$\times$10-7mol/$m^2$.s.Pa respectively.

  • PDF

열분석법에 의한 Al-2.1Li-2.9Cu합금이 석출현상에 미치는 In 첨가의 영향 (Effects of In on the Precipitation Phenomena of Al-2.1Li-2.9Cu Alloy by Differential Scanning Calorimetry)

  • 박태원;송영범;이용연
    • 열처리공학회지
    • /
    • 제10권4호
    • /
    • pp.237-245
    • /
    • 1997
  • A study was conducted to examine the effects of In addition on the precipitation behaviors of Al-2.1Li-2.9Cu alloy by differential scanning calorimetry, transmission electron microscopy and micro-hardness tester. DSC analysis was measured over the temperature range of $25{\sim}550^{\circ}C$ at a heating rate of $2{\sim}20^{\circ}C$/min. The heat evolution peaks due to the formation of GP zone and ${\delta}$'phase shift to higher temperature and the peaks to $T_1$ and ${\theta}$'phases shift to lower temperature by In addition. From this result, it was proved that the formation of GP zone and ${\delta}$'phase is suppresed whereas that of $T_1$ and ${\theta}$'phases are accelerated by the In addition of 0.15wt%. The age hardening curve aged at $190^{\circ}C$ showed that the In bearing alloy(alloy B) has more faster age hardening response and a higher peak hardness than In-free alloy(alloy A), attributed to the fine and homogeneous distribution of $T_1$ and ${\theta}$'phases. The activation energies for the formation of ${\delta}$'phase in In-free and In-bearing alloys are 22.3kcal/mol and 18.6kcal/mol, respectively. Those for $T_1(+{\theta}^{\prime})$ phase of In-free and In-bearing alloys are 24.3 and 37.5kcal/mol, respectively. Quenched-in excess vacancies play an important role to the formation of precipitates.

  • PDF

$Bi_2Sr_2Ca_nCu_{n+1}O_x$ 박막의 단상 형성을 위한 열역학 해석 (Analysis of Thermodynamics for Formation of Single Phase in $Bi_2Sr_2Ca_nCu_{n+1}O_x$ Thin Films)

  • 천민우;박용필;김정호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.1208-1211
    • /
    • 2003
  • High quality $Bi_2Sr_2Ca_nCu_{n+1}O_x$ superconducting thin films fabricated by using the evaporation method at various substrate temperatures, $T_{sub}$, and ozone gas pressures, $pO_3$. The correlation diagrams of the $Bi_2Sr_2Ca_nCu_{n+1}O_x$ phases with $T_{sub}$ and $pO_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 as well as Bi2212 phases come out as stable phases depending on $T_{sub}$ and $pO_3$. From these results, the thermodynamic evaluation of ${\Delta}H$ and ${\Delta}S$, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase, was performed.

  • PDF

Oxalate 침전을 이용한 Li-과량 LiMn$_2$O$_4$ Spinel의 습식합성가 분말 특성 (Wet Chemical Preparation of Li-rich LiMn$_2$O$_4$ Spinel by Oxalate Precipitation)

  • 이병우;김세호
    • 한국세라믹학회지
    • /
    • 제36권7호
    • /
    • pp.698-704
    • /
    • 1999
  • Li rich Li1+xMn2-xO4(x=0.07) spinel powders were prepared by an oxalate precipitation of wet chemical methods at temperature lower than $600^{\circ}C$. The FTIR results showed that the powders prepared at $600^{\circ}C$ had high degree of crystal quality comparing with the spinel powders prepared by solid state reaction at 75$0^{\circ}C$ which was the lowest synthesis temperature of the solid state reaction method. The particle size of powders prepared by the oxalate precipitation at $600^{\circ}C$ was smaller than 0.2${\mu}{\textrm}{m}$ and the specific surface area was 11.01 m2/g A heat treatment over 90$0^{\circ}C$ formed second phase in the precipitates. It was shown that there were phase transitions at temperatures. T1,T2 and T2. The transitions involved weight loss and gain during heating and cooling. The low temperature synthesis below $600^{\circ}C$ avoided the second phase formation and the prepared powders showed improved compositional and physical properties for secondary lithium battery applications.

  • PDF

T-Junction 스위칭 회로를 이용한 이중 대역 전압제어 발진기 구현 (A Realization on the Dualband VCO Using T-Junction Switching Circuit)

  • 오익수;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제42권1호`
    • /
    • pp.105-110
    • /
    • 2005
  • 본 논문에서는 T-Junction 스위치 구조를 이용하여 이중 대역 전압제어 발진기를 설계, 제작하였다. T-Junction 스위치는 이중 대역 공진을 얻기 위한 스위치로서 공진부에 적용된다. 설계한 공진기를 발진기의 능동부와 결합하여 이중 대역 전압제어 발진기를 만들었다. 상위 주파수 대역 5.715 GHz 에서 전압제어 발진기의 출력 전력은 -1.42 dBm, 위상잡음은 1 MHz offset에서 -94.37 dBc/Hz이고 하위 주파수 대역 2.236 GHz에서 출력 전력은 -2.09 dEm, 위상잡음은 1 MHz offset -104.78 dBc/Hz 이다.

Treponema denticola sonicated extract에 의한 임파구 세포주기 차단 기전에 관한 연구 (SONICATED EXTRACT OF TREPONEMA DENTICOLA IMPAIRS THE LYMPHOCYTE PROLIFERATION)

  • 이우철
    • Restorative Dentistry and Endodontics
    • /
    • 제27권5호
    • /
    • pp.473-478
    • /
    • 2002
  • 근관내 spirochetes의 존재유무가 명확하게 밝혀져 있지 않았으나 최근 PCR을 사용한 연구에서 Treponema denticola균주가 감염근관의 50% 이상의 경우에서 발견됨에 따라 이 세균이 치수 및 치근단 질환에 관여하는지에 대한 관심 이 높아졌다. 하지만 그 정확한 기전은 아직 밝혀져 있지 않다. 이와 관련하여 Shenker등이 T. denticola의 sonicated extract에서 순수분리된 단백질 (SIP)이 임파구 proliferation을 방해함을 보고한바 있다. 따라서 본 연구의 목적은 면역억제단백질 SIP이 어떤 기전에 의해서 임파구증식을 억제하는지를 밝히는 데 있다. 건강한 혈액 공여자로부터 추출해낸 T세포에 PHA (phytohemagglutinin)로 증식자극을 주게되는데 이 과정에서 SIP을 처리하거나 처리하지 않은 경우를 비교하여 세포주기 진행과정을 유세포분석기 (Becton-Dickinson FACS$^{tarplus}$) 를 통하여 평가하였다. 실험결과 세단계의 chromatography과정을 통해 순수정제된 SIP은 50kDa와 56kDa의 두가지 polypeptide로 구성되어 있고 0.25$\mu\textrm{g}$으로 처리된 T 임파구는 42.5%의 [$^3$H]thymidine incorporation 억제가 그리고, 0.5$\mu\textrm{g}$으로 처리한 경우는 75.1%의 억제가 일어나 dose-dependent한 양상이 나타났다. Propidium iodide와 유세포 분석기를 사용하여 세포주기를 분석한 결과 medium으로만 처리한 경우 97%이상의 임파구는 G$_0$/G$_1$ phase에 머물러 있었으나 PHA자극을 받은 경우 G$_0$/G$_1$ phase에서 58%, S phase에서 34.6%, G$_2$/M phase에서 7.4%로 분포되어 나타났다. SIP으로 전처리한 경우 세포 증식이 감소하여 0.25$\mu\textrm{g}$을 첨가한 경우 75.1%가 G$_0$/G$_1$ phase에 머물러 있었고 더 강한 농도의 0.5$\mu\textrm{g}$을 첨가한 경우는 87.7%가 G$_0$/G$_1$ phase에서 S phase로 진행되지 않고 머물러있었다. 따라서 SIP으로 전처리된 T 임파구는 그 증식이 G$_0$/G$_1$ phase에서 차단된 것으로 보인다. 이러한 면역억제현상이 in vitro 상태뿐 아니라 in vivo에서도 진행된다면 spirochete가 치수 및 치근단 질환의 병인론에 연관된 면역반응저하기전에 중요한 역할을 하는 것으로 추론할 수 있다.

Fault Current Limiting Characteristics of Separated and Integrated Three-Phase Flux-Lock Type SFCLs

  • Lim, Sung-Hun
    • Journal of Electrical Engineering and Technology
    • /
    • 제2권3호
    • /
    • pp.289-293
    • /
    • 2007
  • The fault current limiting characteristics of the separated and the integrated three-phase flux-lock type superconducting fault current limiters (SFCLs) were analyzed. The three-phase flux-lock type SFCL consisted of three flux-lock reactors and three $high-T_c$ superconducting (HTSC) elements. In the integrated three-phase flux-lock type SFCL, three flux-lock reactors are connected on the same iron core. On the other hand, three flux-lock reactors of the separated three-phase flux-lock type SFCL are connected on three separated iron cores. The integrated three-phase flux-lock type SFCL showed the different fault current limiting characteristics from the separated three-phase flux-lock type SFCL that the fault phase could affect the sound phase, which resulted in quench of the HTSC element in the sound phase. Through the computer simulation applying numerical analysis for its three-phase equivalent circuit, the fault current limiting characteristics of the separated and the integrated three-phase flux-lock type SFCLs according to the ground fault types were compared.

Effects of Phase Feeding and Sugar Beet Pulp on Growth Performance, Nutrient Digestibility, Blood Urea Nitrogen, Nutrient Excretion and Carcass Characteristics in Finishing Pigs

  • Ko, T.G.;Lee, J.H.;Kim, B.G.;Min, T.S.;Cho, S.B.;Han, In K.;Kim, Y.Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권8호
    • /
    • pp.1150-1157
    • /
    • 2004
  • This experiment was conducted to investigate effects of phase feeding and sugar beet pulp (SBP) on growth performance, nutrient digestibility, nitrogen excretion, blood urea nitrogen (BUN) concentration and carcass characteristics in finishing pigs. A total of 128 pigs were allotted at 53.9 kg BW to 8 replicates in a 2$\times$2 factorial arrangement in a randomized complete block (RCB) design. The first factor was phase feeding (2 or 3 phase feeding) and SBP (SBP: 0% or 10%) was the second factor. Ten percent SBP supplement groups showed lower average daily feed intake (ADFI) than 0% SBP supplement groups (p<0.05). However, there were no significant difference in average daily gain (ADG) and feed:gain ratio among treatments during overall experimental period. Nutrient digestibility was not affected by phase feeding or SBP supplementation. Urinary nitrogen excretion in 10% SBP supplement group was lower than that in 0% SBP supplement group (p<0.05) and total nitrogen excretion was lower in SBP supplement group than in the group without SBP. Urinary and total nitrogen were numerically decreased in three phase feeding compared to two phase feeding. The BUN concentration in three phase feeding groups was lower than two phase feeding groups at 47 and 63 day (p<0.05). Consequently, results of this experiment demonstrated that three phase feeding was more acceptable than two phase feeding for finishing pigs. And sugar beet pulp could be supplemented in finishing pig diet for decreasing urinary nitrogen excretion without retardation in growth performance of pigs.