• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.432-438
• /
• 2011

We need to make the standard of the best baffle shape and L/W ratio of clearwell due to insufficient disinfection in short L/W ratio and uneconomic design in long L/W ratio. The objectives of this research were to evaluate the best shape of baffle and economic L/W ratio in the all sorts of shape and size by using computational fluid dynamics. In the results of this research, the baffle with smaller number of turning flow is more beneficial for hydraulic efficiency. So, even if the same shape and structure, baffle should be designed as smaller number in turning flow. The best shape of baffle is ZigZag type (model 2) and the worst shape is Distributed types (model 4). The ZigZag type can reduce number of baffle about 67% than that of the Distributed types. In the ZigZag type, economic L/W ratio is 30~50. If L/W ratio exceed over 50, it is not economic because construction costs greatly increase and an increasing rate of $T_{10}/T$ is very small.

• Journal of dental hygiene science
• /
• v.3 no.2
• /
• pp.67-70
• /
• 2003

The biological effects of the crude extracts from medicinal plants, Brachyglottis monroi and Trichocolea hatcheri were investigated. The crude ethanol extract inhibited the growth of the Gram positive bacterium Bacillus subtilis (ATCC 19659, 1 mm inhibition zone at $150{\mu}g/disc$) and the dermatophyte Trichophyton mentagrophytes (ATCC 28185, 6 mm inhibition zone at $150{\mu}g/disc$), and was toxic to P388 murine leukaemia cells ($IC_{50}$ $23.96{\mu}g/mL$ at $75{\mu}g/disc$). B. monroi ethanol extract showed stronger antiviral activity than that of T. hatcheri against Herpes simplex Type I virus (ATCC VR 733) and Polio Type I virus (Pfizer vaccine strain) (50% activity, @ 5 mg/ml at $150{\mu}g/disc$). The crude ethanol extract of T. hatcheri showed stronger antimicrobial activity than that of B. monroi. However, this extract was inactive against P388 murine leukaemia cells.

• Journal of Life Science
• /
• v.28 no.9
• /
• pp.1022-1029
• /
• 2018

This study was carried out to search for the anti-inflammatory activities of ethanol extracts obtained from 5 kinds of oriental medical plant; Pleuropterus multiflorus extract (PME), Acorus calamus L. extract (ACE), Lithospermum erythrorhizon Siebold & Zucc. extract (LEE), Xanthium strumarium L. extract (XSE), Lonicera japonica extract (LJE), which have traditionally been used as a drug in oriental medical plants in Korea. XSE showed cytotoxicity at 100, $200{\mu}g/ml$ concentration in RAW264.7 cells (p<0.05) and ACE showed cytotoxicity at $200{\mu}g/ml$ concentration in RAW264.7 cells (p<0.05). But other oriental medical plants did not showed cytotoxicity was observed in RAW264.7 cells below $200{\mu}g/ml$ concentration. These extracts at non-toxic concentrations showed anti-inflammatory effects. PME, ACE, XSE and LJE showed a concentration-dependent inhibitory effect on NO production and $PGE_2$ production in LPS-induced RAW264.7 cells. In particular, XSE showed the highest NO production inhibition ($52.9{\mu}g/ml$, $IC_{50}$) as well as the highest $PGE_2$ production inhibition at $50{\mu}g/ml$ (73.6%). ACE and LEE showed cell proliferation effects on HaCaT keratinocyte cells. Especially, LEE showed 21.1, 53.5 and 99.6% proliferative activity by incubation for 1, 3, 5days at $100{\mu}g/ml$ concentration. ACE also showed 11.2, 26.0% proliferative activity for 1day and 3days at $10{\mu}g/ml$ concentration. As a result of this study, ethanol extracts obtained from 5 kinds of oriental medical plant showed anti-inflammatory activity and HaCaT cell regeneration effect.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.35-40
• /
• 1999

The variations of the glass transition, melting peaks, molecular weight and its distribution (polydispersity index: PI) due to the annealing temperature and time have been investigated using the thermoplastic segmented polyurethanes (TPUs) and its blends based on the contents of hard segment. The position of the melting peak and its magnitude have been increased with the annealing temperature and time. This may be arised from the rearrangement of the microdomain structure due to the long-range or short-range segmental motion, the order-disorder transition of non-crystalline microphase, the variation of the domain size or the degree of disorder of crystalline structure by given different thermal histories. The annealing temperature and time affected the molecular weights and polydispersity : the number and weight average molecular weights were increased, while the polydispersity index (PI) deceased at certain temperatures : for TPU-35 at $135^{\circ}C$, for TPU-44 at $170^{\circ}C$ and for TPU-53 at $180^{\circ}C$. The temperatures which give the variations in molecular weights and in PIs are consistent with the annealing temperatures of which $T_3$ solely exists for each sample. Thus it is suggested that the chain dissosiation and recombination simultaneously occur at the above mentioned temperature for each sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.640-646
• /
• 2017

A GEN TEST of the auxiliary power unit of a T-50 series aircraft is performed as part of the operational test of its emergency power system on the ground before flight. At this time, the auxiliary power unit should be automatically turned off via the response signal of the ECU when power is not normally supplied to the emergency power system. If the correct operation of the emergency power system cannot be confirmed on the ground, it is not possible to proceed with the flight. This kind of defect is a major factor causing the operation rate of the aircraft to be decreased. The defect code identified by the ECU was confirmed as a defect in the inverter. However, the same defect was found after replacing the inverter. This report presents an improved method of identifying the cause of the defect by analyzing the response characteristics of the ECU and emergency power system and allows the ECU to be recognized as the cause of the defect if the inverter does not generate a voltage within a certain time. Also, the application of the improved method confirmed that it can satisfy the output request time of the emergency power system and effectively prevent the auto-shutdown of the auxiliary power unit.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.80-86
• /
• 2014

A low-noise readout circuit is studied for 2-D capacitive microbolometer focal plane arrays (FPAs). In spite of the merits of the integration method, a simple and effective pixelwise readout circuit without integration is used for input circuit because of a small pixel size and narrow noise bandwidth. To reduce the power consumption and the kT/C noise, which is the dominant noise of the capacitive microbolometer FPAs with small capacitance, a new correlated double sampling (CDS) is used for columnwise circuit. The proposed circuit has been designed using a $0.35-{\mu}m$ 2-poly 4-metal CMOS process for a microbolometer array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The proposed circuit effectively reduces the kT/C noise and the other low-frequency noise of microbolometer, and the noise characteristics of the fabricated chip have been verified by measurements. The rms noise voltage of the proposed circuit is reduced from 30 % to 55 % compared to that of the simple readout input circuit, and the noise equivalent temperature difference (NETD) of the proposed circuit is very low value of 21.5 mK.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.534-539
• /
• 2014

This study was carried out to establish seed propagation method of Hydrangea petiolaris Siebold & Zucc., one of the specific and protected plant species for the floral region. Seed size ranged $1.36{\times}0.84mm$, weight of thousand seeds was $2.3{\pm}0.02mg$. Observation of seed morphology characters showed wrinkled surface and elliptical shape, indicating amber color and fine seeds. Moisture contents of seeds, increased rapidly by water-soaking treatment, recording maximum moisture contents (31.9%) after 48 hours. Percent germination of seeds was higher under the light than dark condition. Seed germination was the best at $25^{\circ}C$ under the light condition (78.0%) among temperature and light conditions treated. Percent germination, germination energy and $T_{50}$ was greatly improved by soaking in $GA_3$ solutions for 48 hours. Especially, $100{\sim}500mg{\cdot}L^{-1}$ $GA_3$ treatment resulted in the highest germination rate as 90.0% and above.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.1-8
• /
• 2005

A $0.35\mu$m SiGe BiCMOS fabrication process has been timely developed, which is aiming at wireless RF ICs development and fast growing SiGe RF market. With non-selective SiGe epilayer, SiGe HBTs in this process used trapezoidal Ge base profile for the enhanced AC performance via Ge induced bandgap niuoin. The characteristics of hFE 100, $f_{T}\;45GHz,\;F_{max}\;50GHz,\;NF_{min}\;0.8dB$ have been obtained by optimizing not only SiGe base profile but also RTA condition after emitter polysilicon deposition, which enables the SiGe technology competition against the worldwide cutting edge SiGe BiCMOS technology. In addition, the process incorporates the CMOS logic, which is fully compatible with $0.35\mu$m pure logic technology. High Q passive elements are also provided for high precision analog circuit designs, and their quality factors of W(1pF) and inductor(2nH) are 80, 12.5, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5338-5343
• /
• 2013

In a haptic system, a virtual wall is modeled as a virtual spring. The larger the stiffness of the virtual spring is, the more improved the reality of the virtual wall is, but the more unstable the haptic system becomes. This paper shows how to increase the stiffness of the virtual spring while the stability of the haptic system is guaranteed and shows the effects of a mass (Md) and a damper (Bd) of a haptic device on the stability when first-order hold method is applied and a virtual wall is modeled as a virtual spring (Kw). The simulation results show the boundary of the virtual spring is proportional to the square root of the mass (Md) and the damper (Bd) while maintaining the stability. The relation among the virtual spring (Kw), the mass (Md) and the damper (Bd) of the haptic device, and sampling time (T) is inferred as $K_w{\leq}{1.611M_d}^{0.50}{B_d}^{0.50}T^{-1.51}$, by using the simulation results. The maximum available stiffness of the virtual spring in first-order hold method is larger than in zero-order hold method. So the reality of the virtual wall can be improved.

• Elastomers and Composites
• /
• v.37 no.2
• /
• pp.79-85
• /
• 2002

Ethyl-branched polyethylene [PE(2)] containing 2mole% ethyl branch and three ethylene-propylene rubbers (EPR's) having the same ethylene(E)-propylene(P) molar ratio(E/P=50/50) with different stereoregularity, that is, random EPR (r-EPR), alternating-EPR (alt-EPR) and isotactic-alternating-EPR (iso-alt-EPR) were mixed for the investigation or their properties depending on the stereoregularity. Crystallinity of the prepared blends decreased with increasing content of amorphous EPR because of a decrease in both the degree of annealing and kinetics of diffusion of the crystallizable polymer content. With blend composition, crystallinity was reduced with the stereoregularity in EPR. The thermodynamic interaction parameter(x) for the three blend systems approximately equals to zero near the melting point. These systems were determined to be miscible on a molecular scale near or above the crystalline melting point or the crystalline PE(2). From the measurement of $T_m$ vs. $T_c$, the behavior of PE(2) is mainly due to a diluent effect of EPR component. The spherulite size measured by small angle light scattering (SALS) technique depended upon blend composition, and stereoregularity of EPR. The size of spherulite was enlarged with the content of rubbery EPR and the decrease of stereoregularity in EPR.