• Title/Summary/Keyword: $SrI_2$

Search Result 393, Processing Time 0.025 seconds

Electrical Conduction Mechanism of (Ba, Sr) $TiO_3$ Thin Film Capacitor in Low Electric Field Region (고유전 (Ba, Sr) $TiO_3$ 박막 커패시터의 저전계 영역에서의 전기전도기구)

  • Jang, Hoon;Jang, Byung-Tak;Cha, Seon-Yong;Lee, Hee-Chul
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.6
    • /
    • pp.44-51
    • /
    • 1999
  • The electrical conduction mechanism of high dielectric $(Ba,Sr)TiO_3$ (BST) thin film capacitor, which is the promising cell capacitor for high density DRAM, was investigated in low field region (<0.2MV/cm). It is known that the current in the low field region consists of dielectric relaxation current and leakage current. The current-time (I-t) measurement technique under the constant voltage was used for extracting successfully each current component. The conduction mechanism of the BST capacitor was deduced from the dependency of the current on the measurement temperature, strength of electric field, the polarity of applied electric field and post annealing process. From these results, it was suggested that the dielectric relaxation current and the leakage current are originated from the redistribution of internally trapped electron by hopping process and Pool-Frenkel conduction mechanism, respectively. It was also concluded that traps causing these two current components are due to oxygen vacancies within the BST film.

  • PDF

LS-MOCVD OF BARIUM STRONTIUM TITANATE THIN FILMS USING NOVEL PRECURSORS

  • Kwon, Hyun-Goo;Oh, Young-Woo;Park, Jung-Woo;Lee, Young-Kuk;Kim, Chang-Gyoun;Kim, Do-Jin;Kim, Yunsoo
    • Proceedings of the Korea Crystallographic Association Conference
    • /
    • 2002.11a
    • /
    • pp.19-19
    • /
    • 2002
  • Perovskite-type titanate dielectrics have attracted much attention in memory devices such as DRAMs or FeRAMs due to their high dielectric constants. However, low volatility of the Ba, Sr, Pb or Zr precursors with only thd ligands has limitations in obtaining high quality thin films by liquid source metal organic chemical vapor deposition (LS-MOCVD) processes. To improve the volatility of these precursors, many attempts have been made such as adding polyether ligands to satisfy the coordinative saturation. We report the synthesis of new precursors Ba(thd)₂(tmeea) and Sr(thd)₂(tmeea), where tmeea = tris[2-(2-methoxyethoxy)ethyl]amino, and LS-MOCVD of barium strontium titanate (BSTO) thin films using these precursors. Due to increased basicity of amines compared with ethers, it is expected that the nitrogen-donor ligand will make a strong bond to a metal than an analogous oxygen-donor ligand, consequently improving the volatility and thermal behavior of these precursors. Thin films of BSTO were grown on Pt(111)/SiO₂/Si(100) substrates by LS-MOCVD using a cocktail source consisting of the conventional Ti precursor Ti(thd)₂(O/sup i/Pr), and these new Ba and Sr precursors. As-grown films were characterized by XPS, SEM, XRD, XRF, and C-V and I-V measurements. BSTO films grown at 420℃ were stoichiometric barium strontium titanate with very smooth surface morphology and their dielectric constants were found to be as targe as 450. Dependence of the composition, microstructure and the electrical properties of the BSTO films on the growth temperature, annealing temperature, working pressure, and the composition of the cocktail source will be discussed.

  • PDF

Studying the $SrTiO_3$: Pr cathode-luminescence

  • Kargin, N.I.;Vorobiev, V.A.;Sinelnikov, B.M.;Kuznetsov, U.V.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2006.08a
    • /
    • pp.268-269
    • /
    • 2006
  • The estimation of applicability $SrTiO_3:Pr^{3+}$, Al to a class low-voltage flat-panel displays based on field emission effect, which have average value anode voltage $U_a=300V$ and current density $j=100\;mA/sm^2$ at duty 240, has given positive result. In the same time observably for the most effective sample in similar conditions of excitation high brightness - more than $500\;Kd/m^2$ and linear brightness dependences from current density and voltage allows to decrease greatly the power which consumed by the device.

  • PDF

An Assessment of the Role of Rare Earth in the Eutetic Modification of Cast Aluminum-Silicon Alloys (알루미늄-실리콘 합금주물의 공정조직 개량처리에 미치는 희토류 금속의 역할에 관한 평가)

  • Ye, B.J.
    • Journal of Korea Foundry Society
    • /
    • v.6 no.2
    • /
    • pp.104-115
    • /
    • 1986
  • I A쪽과 II A쪽이 Al-Si 합금의 공정조직개량 처리에 효과적인 것은 잘 알려진 사실이나 Na(Sodium)과 Sr(Strontium)만 상업적으로 쓰여지고 있다. 그러나 휘발성과 산화하기 쉬운점때문에 Na 은 그 양을 정확하게 조절하기가 어렵고 특히 온도가 높은 경우 더욱 곤란하나 Sr 은 휘발성이나 산화성은 없으나 micro-또한 macro-porocity의 주 원인으로 보고 되고 있다. 희토류 금속 (예 : Cerium, Lanthanum,etc )도 개량처리 효과가 있다는 논문들(ref. 2, 3, 4, 5) 이 있고, 계속 연구되어 오고 있으나 그 세부사항과 효율성에 관해 정립된 바가 없다. 이런 연유로 Al-Si 합금의 생산을 위한 개량 처리제로서의 희토류 금속의 역할에 대해 구체적이고 세부적인 개량처리기구의 구명을 위해 이 연구가 이루어졌다. Al-Si 합금 356가 채택된 이유는 상업적 Al 주물의 생산을 감안해서 였다.

  • PDF

Algorithm for Addition Minimization Shift-and-Add of Binary Multiplication Problem (이진수 곱셈 문제의 덧셈 최소화 자리이동-덧셈 알고리즘)

  • Sang-Un Lee
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.6
    • /
    • pp.55-60
    • /
    • 2023
  • When performing the multiplication m×r=p of two binary numbers m and r on a computer, there is a shift-and-add(SA) method in which no time-consuming multiplication is performed, but only addition and shift-right(SR). SA is a very simple method in which when the value of the multiplier ri is 0, the result p is only SR with m×0=0, and when ri is 1, the result p=p+m is performed with m×1=m, and p is SR. In SA, the number of SRs can no longer be shortened, and the improvement part is whether the number of additions is shortened. This paper proposes an SA method to minimize addition based on the fact that setting a smaller number to r when converted to a binary number to be processed by a computer can significantly reduce the number of additions compared to the case of setting a smaller number to r based on the decimals that humans perform. The number of additions to the proposed algorithm was compared for four cases with signs (-,-), (-,+), (+,-), and (+,+) for some numbers in the range [-127,128]. The conclusion obtained from the experiment showed that when determining m and r, it should be determined as a binary number rather than a decimal number.

Fractionation of Heavy Metals by Early Diagenesis in Deep-sea core Sediments from the Korea Deep-sea Environmental Study (KODES) area, NE Equatorial Pacific (한국심해환경연구(KODES) 지역 표층 퇴적물 중 속성작용에 의한 금속의 분화)

  • Park, Sung-Hyun;Jung, Hoi-Soo;Park, Chan-Young;Lee, Kyeong-Yong;Kim, Ki-Hyun
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.4 no.3
    • /
    • pp.215-225
    • /
    • 1999
  • To study the vertical variations of major elements, trace elements and rare earth elements(REEs) contents in deep-sea sediments, six cores from Korea Deep-sea Environmental Study area(KODES) were analyzed. Topmost sediment layers of KODES area are divided into two Units; brown-colored and peneliquid Unit I and pale brown-colored and relatively solidified Unit II. Contents of major elements, REEs, Cu, Sr and Rb in each Unit are almost same, while contents of Mn, Ni and Co in Unit I are two or three times higher than those in Unit II. R-mode factor analysis represents that surface sediments are composed of alumino-silicate phase (AI-Ti-K-Mg-Fe-Rb-Ce), apatite phase (Ca-P-Cu-Sr-Trivalent Rare Earth Elements) and Mn-oxide phase(Mn-Ni-Co). Factor scores in silicate and apatite phases in each Unit are nearly same, whereas those in Mn-oxide phase in Unit I is higher than those in Unit II. While NilCu ratio in Unit I is two times higher than that in Unit II. We interprete the geochemical fractionation of Ni and Cu as a result that Ni can be remobilized in oxygen-depleted micro-environment in Units I and II and then easily reprecipitated in Unit I, while most of Cu supplied together with organic material is decomposed mostly in Unit I and sorbed into apatite.

  • PDF

Application of Exchange Equations for NH4-K NH4-Ca Equilibria (NH4-K 와 NH4-Ca 평형에 대한 양이온 치환식의 적용)

  • Chung, Jong-Bae;Sa, Tong-Min
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.28 no.3
    • /
    • pp.218-226
    • /
    • 1995
  • Ion exchange equilibria in bulk and rhizosphere soil collected from peach seedlings were studied to find exchange equations that could be used in chromatographic models dealing with movement and distribution of fertilizer ammonium and exchangeable cations in soil profiles. Soil samples were equilibrated with mixtures of $NH_4Cl$, KCI, and $CaCl_2$ solutions and then extracted with $Sr(NO_3)_2$ solution to determine exchangeable cation compositions at equilibrium. Exchange data were fitted to Vanselow's, Gapon's, and Kerr's equations, but those formulations did not adequately describe the equilibria. An empirical equation of the form : ${\frac{\alpha_i^m}{a_j^n}}=K{\frac{(iX)^{mPi}}{(jX)^{nPj}}}$ which has an exponent on each of the exchangeable cation concentrations could describe the equilibria very well over the range of treatments. In this equation ${\alpha}^i$ and ${\alpha}^j$ are activities of cation i and j with valences m and n respectively. (iX) and (jX) are concentrations of exchangeable cations. Mole or equivalent fractions can be considered as the exchangeable ion concentration unit. Arbitrary constants $P_i$ and $P_j$, and distribution coefficient K can be found with multiple regression for the logarithmic form of the equation.

  • PDF

Transport Parameters of 99Tc, 137Cs, 90Sr, and 239+240Pu for Soils in Korea

  • Keum, D.K.;Kim, B.H.;Jun, I.;Lim, K.M.;Choi, Y.H.
    • Journal of Nuclear Fuel Cycle and Waste Technology
    • /
    • v.1 no.1
    • /
    • pp.49-55
    • /
    • 2013
  • To characterize quantitatively the transport of $^{99}Tc$ and the global fallout ($^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$) for soils in Korea, the transport parameters of a convective-dispersion model, apparent migration velocity, and apparent dispersion coefficient were estimated from the vertical depth profiles of the radionuclides in soils. The vertical profiles of $^{99}Tc$ were measured from a pot experiment for paddy soil that had been sampled from a rice-field around the Gyeongju radioactive waste repository in Korea, and the vertical depth distributions of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were measured from the soil samples that were taken from local areas in Korea. The front edge of the $^{99}Tc$ profiles reached a depth of about 12 cm in 138 days, indicating a faster movement than the fallout radionuclides. A weak adsorption of $^{99}Tc$ on the soil particles by the formation of Tc(VII) and a high water infiltration velocity seemed to have controlled the migration of $^{99}Tc$. The apparent migration velocity and dispersion coefficient of $^{99}Tc$ for the disturbed paddy soil were 2.88 cm/y and 6.3 $cm^2/y$, respectively. The majority of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were found in the top 20 cm of the soils even after a transport of about 30 years. The transport parameters for the global fallout radionuclides were 0.01-0.1cm/y ($^{137}Cs$), 0.09-0.13cm/y ($^{90}Sr$), and 0.09-0.18cm/y ($^{239+240}Pu$) for the apparent migration velocity: 0.21-1.09 $cm^2/y$ ($^{137}Cs$), 0.12-0.7$cm^2/y$ ($^{90}Sr$), and 0.09-0.36$cm^2/y$ ($^{239+240}Pu$) for the apparent dispersion coefficient.

Geochemical Characteristics of A-type granite in Dongcheondong, Gyeongju (경주 동천동 일대에 분포하는 A-형 화강암의 지화학적 특성)

  • Myeong, Bora;Ju, Jiwon;Kim, Junghoon;Jang, Yundeuk
    • The Journal of the Petrological Society of Korea
    • /
    • v.26 no.3
    • /
    • pp.271-280
    • /
    • 2017
  • The Dongcheondong granite is alkali feldspar granite in Dongcheondong, Gyeongju. The granite is coarse grained and consists of alkali feldspar, quartz, amphibole, and biotite. Alkali feldspar is perthitic orthoclase and quartz often shows undulatory extinction. Plagioclase often shows albite twins, and biotite and amphibole emplace as interstitial minerals. The Dongcheondong granite is plotted in A-type area having high ($Na_2O+K_2O)/Al_2O_3$ and low (MgO+CaO)/FeOT ratio. The Dongcheondong A-type granite has higher $SiO_2$, $Na_2O$, $K_2O$, Zr, Y, and REE contents (except for Eu) and lower $TiO_2$, $Al_2O_3$, CaO, MgO, Sr, Ba, and Eu contents than I-type granites in Gyeongsang Basin. These results show that the geochemical characteristics of the Dongcheondong A-type granite are distinguished from I-type granite in Gyeongsang Basin. A-type granite in the Dongcheondong is thought to has been generated by partial melting of I-type tonalite or granodiorite.

Characteristics of the SrBi2Nb2O9 Thin Films Deposited by RF Magnetron Sputtering with Controlling of Bi Contents (RF마그네트론 스퍼터링 법에 의해 증착된 SrBi2Nb2O9 박막의 Bi 량의 조절에 따른 특성분석)

  • Lee, Jong-Han;Choi, Hoon-Sang;Sung, Hyun-Ju;Lim, Geun-Sik;Kwon, Young-Suk;Choi, In-Hoon;Son, Chang-Sik
    • Korean Journal of Materials Research
    • /
    • v.12 no.12
    • /
    • pp.962-966
    • /
    • 2002
  • The $SrBi_2$$Nb_2$$O_{9}$ (SBN) thin films were deposited with $SrNb_2$$O_{6}$ / (SNO) and $Bi_2$$O_3$ targets by co-sputtering method. For the growth of SBN thin films, we adopted the various power ratios of two targets; the power ratios of the SNO target to $Bi_2$$O_3$ target were 100 W : 20 W, 100 W : 25 W, and 100 W : 30 W during sputtering the SBN films. We found that the electrical properties of SBN films were greatly dependent on Bi content in films. The $Bi_2$Pt and $Bi_2$$O_3$ phase as second phases occurred at the films with excess Bi content greater than 2.4, resulting in poor ferroelectric properties. The best growth condition of the SBN films was obtained at the power ratio of 100 W : 25 W for the two targets. At this condition, the crystallinity and electrical properties of the films were improved at even low annealing temperature as $700^{\circ}C$ for 1h in oxygen ambient and the Sr, Bi and Nb component in the SBN films were about 0.9, 2.4, and 1.8 respectively. From the P-E and I-V curves for the specimen, the remnant polarization value ($2P_{r}$) of the SBN films was obtained about 6 $\mu$C/c $m^2$ at 250 kV/cm and the leakage current density of this thin film was $2.45$\times$10^{-7}$ $A/cm^2$ at an applied voltage of 3 V.V.