• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.381-398
• /
• 1975

Present work was executed to evaluate effects of adjuvants. stabilizers. moisture. pH and heavy metals on the stability of Fenitrothion in the emulsifiable concentrate. In addition, susceptibility ' of Fenitrothion in various formulations, to UV-irradiation has been also examined. The results are summarized as follows; 1. Xylene and benzene were found to be satisfactory solvents for Fenitrothion emulsifiable concentrate. As expected, polar sol vents such as aliphatic alcohols considerably reduced stability of the pesticides. 2. Of the two non-ionic emulsifiers, an alkyl aryl type Sorpol-1200, in contrast to sorbitan type Tweens, substantially reduced decomposition of Fenitrothion in the emulsifiable concentrates. Moisture and pH of emulsifiers. in the ranges studied. affected little if any. on the stabi ity of the Fenitrothion during the experiment periods. 3. Maleic anhydride, p-toluene sulfonic acid, sulfosalicylic acid, maleic anhydride-sulfosalicylic acid reduced decomposition of Fenitrothion in the emulsifiable concentrate. Addition of organic acids, however, increased liability of Fenitrothion in the emulsifiable concentrate. 4. Presence of either zinc or copper metals in the emulsifiable concentrate containing Tween-80 as a emulsifier, reduced stability of the Fenitrothion. 5. UV-irradiation, as expected, brought decomposition of Fenitrothion. The liability of Fenitrothion formulations decreased in the order, wettable powder ${\gg}$ dust > emulsifiable concentrate.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.6
• /
• pp.115-128
• /
• 2019

Huam-dong is a representative area from the Japanese colonial period and is the space where most Japanese-style buildings remain in Seoul. Interest in modern cultural heritage continues to increase, including the registration of cultural properties in 2001, building assets in 2015, and the registration of cultural property units in 2018. As the debate continues over the necessity of preserving cultural heritage that reminds us of the Japanese colonial, there is a need for research to grasp the perceptions of stakeholders along with the perceived value of such spaces. This study identified the subjective perception types of the stakeholders concerned with the Japanese-style building group in Huam-dong, analyzed characteristics by types, and debated the issues. For this purpose, Q methodology, which is a statistical technique for measuring human self-subjectivity and extracting common human perspectives, was used. A literature study on the values of Huam-dong and modern cultural heritage was conducted, and a Q questionnaire based on five aspects of modern cultural heritage values (historical, architectural, sociocultural, landscape, and economic) was applied. The results of the study depicted three types of cognition and showed different attitudes toward the Japanese building group. This study found a conflict comparing the perceptional differences between the types of cognition. This study is meaningful in that it provides an in-depth approach to the perspectives of the stakeholders concerned with the Japanese-style buildings clustered in central Seoul. It is also meant to present a theoretical framework that can be applied to the use area as sustainable cultural heritage through the establishment of preservation and utilization of Japanese-style areas and conflict resolution.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.111-115
• /
• 2013

The optimum synthetic conditions of poly(p-phenylphenol) by horseradish peroxidase in dioxane:water (80:20 v/v) mixtures were studied. The stability against thermal degradation and structural properties of the synthesized phenolic resins were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The synthetic yield of poly(p-phenylphenol) increased upon the increase of the amount of enzyme up to 0.25 mg HRP/mL, then leveled off for further increase of the enzyme usage. When sodium acetate (100 mM, pH 4~6) and sodium phosphate (100 mM, pH 7~9) were used as the buffering salts for the aqueous component (20% v/v), the synthetic yield of the resin increased at higher pH of the aqueous buffer. But when the pHs of the aqueous buffer were 6 and 9, the synthetic yield strongly depended on the types of the buffering salts; if sodium phosphate was used instead of sodium acetate at pH 6, the yield decreased by about 15% and if sodium bicarbonate was used instead of sodium phosphate, the yield decreased by almost 20%. When the pH range of the aqueous buffer was from 4 to 7, the addition of a radical mediator, 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) (ABTS), up to 2 mM improved the synthetic yield of the resin by about 10%. TGA experiments revealed that the thermal stability of the resin synthesized in dioxane:water (100 mM sodium phosphate, pH 9) (80:20 v/v) was high having the char yield of 47% upon the heating at $800^{\circ}C$. DCS results showed that the structures of the polymers synthesized in acidic aqueous buffers were different from those of the polymers synthesized in the basic aqueous buffers. However, all the synthesized resins were found to have the property of the thermosetting resins.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.5
• /
• pp.480-489
• /
• 2005

Background : Dysregulation of apoptosis plays an important role in carcinogenesis, tumor progression, and resistance to chemotherapy. X-linked inhibitor of apoptosis (XIAP) is considered to be the most potent caspase inhibitor of all known IAP (inhibitor of apoptosis) family members. This study was designed to assess the pattern of expression and the prognostic value of XIAP in radically resected non-small cell lung carcinoma (NSCLC) patients. Method : The expression of XIAP and its relationship with clinicopathologic parameters (patient age, TNM stage, TNM-pT, TNM-pN, histologic type, VEGF expression, microvessel density, PCNA index) and overall survival were analysed with formalin-fixed, paraffin-embedded blocks from eighty cases of NSCLC. In addition, the apoptotic index (AI) was also assessed. Results : In a regard to histologic type, squamous cell carcinoma (SCC) showed XIAP expression in 91.3%(42/46) and adenocarcinoma (AC) in 61.8%(21/34). The difference was significant(p=0.001). There was no correlation between XIAP expression and other parameters. In the group of AC, XIAP expression showed the signifcant correlation with older age group ${\geq}58years$ and VEGF expression(p=0.028, p=0.014, respectively). The AI in the group with or without XIAP expression were $2.5{\pm}4.9%$ and $18.5{\pm}28.9%$, respectively(p=0.001). Both groups just aforementioned showed no significant difference in median survival time (42.5 months, 29.8 months, respectively). Conclusion : This study suggests that the XIAP expression in NSCLCs could have relation to inhibition of apoptosis, and show differential expression according to histologic type. However, its prognostic role during the progression of NSCLC needs to be further defined.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1255-1262
• /
• 2013

The objective of this study was to analyze the general and functional components of various soybeans, used for producing soy sauce, tofu, bean sprouts, and for cooking with rice. The moisture, crude protein, crude fat, and ash content of soybeans were in the ranges of 5.50~6.16%, 38.49~41.08%, 14.89~21.89%, and 4.89~5.86%, respectively. Mineral and functional components varied by sample and showed no relationship with usage type. Somyeong for bean sprouts had the highest level of Ca (406.36 mg/100 g), and Sinpaldal for soy sauce and tofu had the highest level of Mg (247.79 mg/100 g). However, Jinpum No. 2 for soy sauce and tofu had the lowest level of Ca (199.51 mg/100 g), and Seonhuk had the lowest level of Mg (90.03 mg/100 g) among the soybeans tested. The isoflavone content in soybeans was in the range of 97.54~402.00 mg/100 g. Somyeong for bean sprouts had the highest level and Seonheuk for cooking with rice had the lowest level. Total oligosaccharides were in the range of $5,838.52{\sim}9,345.90{\mu}g/100g$. Sucrose content was approximately 50% of total oligosaccharides in all samples. Raffinose content was $516.28{\sim}806.95{\mu}g/100g$, and stachyose content was $2,047.13{\sim}3,454.10{\mu}g/100g$. Phytosterols including bracassisterol, campesterol, stigmasterol, and ${\beta}$-sitosterol ranged from 19.25~35.34 mg/100 g. ${\beta}$-sitosterol represented 50% of total phytosterols in almost all samples, followed by campesterol, stigmasterol and bracassisterol. The phytic acid content in soybeans tested was around 2%, except for Sinpaldal No. 2 and Jinpum No. 2 at 0.86% and 1.65%, respectively. The dietary fiber of soybeans was in the ranges of 24.20%~29.20%.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.315-321
• /
• 2012

Fate of acetamiprid and imidacloprid aerially sprayed to control pine wood nematode (Bursaphelenchus xylophilus) were studied in a forest of Haman area. Acetamiprid 20% SL or imidacloprid 20% DC were diluted 100 times and applied two times as rate of 50 L/ha using an aircraft of Bell 206 L helicopter. Average acetamiprid deposits on forest floor ranged from 2 to 4% of standard aerial application rate. Following to the second application, acetamiprid deposits in the pine needle ranged 1.8~8.5 mg/kg and then gradually decreased to 1.2~2.1 mg/kg after 48 days. Deposits on the plant washed off by rainfall and reached to soil surface was ca. 17% of the application rate. All of acetamiprid on the ground resided in the forest floor covering the soil surface, where acetamiprid residues were decreased to a quarter at 48 days after the second application, but they were not detected in soil beneath it. And the only low level of acetamiprid residues, 0.0003 mg/L, was detected in the reservoir nearby the experimental forest on the day of aerial application. The acetamiprid detection was presumably due to spray drift. And average imidacloprid deposits on forest floor ranged from 1 to 3% of standard aerial application rate. Following to the second application, imidacloprid deposits in the pine needle analysed very low concentration of 0.1 mg/kg, but the amount of imidacloprid in wash-off in standard and two-fold treatment were ca. 8% and 4% of the application rate, respectively. Most of imidacloprid on the ground also resided in the forest floor, where imidacloprid residues were decreased to a twentieth at 111 days after the second application, and they were detected below 0.5% of the application rate in sol beneath it. And the low level of imidacloprid, 0.0003~0.0017 mg/L, were detected in the streams in the experimental forest. It was not to the level of contamination concerns.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.230-239
• /
• 1999

Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.68-73
• /
• 2017

The main objective of this study was to investigate the effects of various commercial pectin enzyme treatments on juice yield from Aronia fruits (Aronia melanocarpa) as well as changes in physicochemical properties such as pH, total acid, reducing sugar, soluble solid, total anthocyanin, total phenolic compounds, and DPPH radical scavenging activity. Different types and reaction conditions of pectinase were also investigated in order to improve extraction yield of Aronia juice. The optimal conditions of enzyme treatment were 0.1% of concentration (w/w) at $50^{\circ}C$ for 120 min. Among enzymes used in this study, extraction yield with Rapidase Press L treatment from Aronia juice was the highest and resulted in a significant increase in juice from 51.0 to 69.1%. Rapidase C80 MAX showed 68.83% extraction yield while Plantase TCL showed 66.70% extraction yield. Reducing sugar and soluble solid contents increased after enzyme treatment. Total acids also slightly increased after enzyme reaction. No significant difference was observed in pH regardless of pectin enzyme treatment. However, enzyme treatment resulted in an increase in total phenolic compounds, total anthocyanin, and DPPH radical scavenging in Aronia juice compared to the juice prepared juice.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.2
• /
• pp.198-208
• /
• 2021

The aim of this study was to evaluate the antibacterial effect on Enterococcus Faecalis and physical properties of chitosan added calcium hydroxide canal filling material. Low, medium, high molecular weights of chitosan powder were mixed with calcium hydroxide canal filling material. Also, for each molecular weight group, 1.0, 2.0, 5.0 wt% of chitosan powder were added. An overnight culture of E. faecalis was adjusted to 1 × 10⁶ CFU/ml. For test of antibacterial effect, three different molecular weights of 2.0 wt% chitosan and three different concentrations of high molecular weight chitosan were mixed with calcium hydroxide canal filling material. The absorbance of plates was analyzed using spectrophotometer at 570 nm with a reference wavelength of 600 nm. Physical properties such as flow, film thickness and radiopacity were examined according to ISO 6876 : 2012. All molecular weight type of chitosan containing material showed inhibitory effect against E. faecalis growth compared to non-chitosan added calcium hydroxide canal filling material group (p < 0.05). High molecular weight chitosan containing material showed the most antibacterial effect. Also, the antibacterial effect decreased as the incorporated amount of chitosan decreased (p < 0.05). Every molecular weight group of material containing chitosan had a tendency for reduced flow and radiopacity, increased film thickness according to amount of chitosan. Low molecular weight of 1.0 wt% chitosan addition did not show any significant difference of physical properties compared to conventional calcium hydroxide canal filling material. In conclusion, for reinforcement of antibacterial effect against E. faecalis and for favorable physical properties, 2.0 wt% of chitosan adding is recommended. Considering its antibacterial effect of chitosan, further studies are required for clinical application of chitosan in endodontics and pediatric dentistry.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.235-241
• /
• 2019

An analytical method was developed for the determination of an antibiotic fungicide, kasugamycin, in agricultural products (hulled rice, potato, soybean, mandarin and green pepper) using liquid chromatographytandem mass spectrometry (LC-MS/MS). Samples were extracted with methanol adjusted to pH 13 using 1 N sodium hydroxide, and purified with a HLB (hydrophilic lipophilic balance) cartridge. Linearity of a matrix-matched calibration curve using seven concentration levels, from 0.001 to 0.1 mg/kg, was excellent with a correlation coefficient ($R^2$) of more than 0.9998. The limits of detection (LOD) and quantification (LOQ) of instrument were 0.0005 and $0.001{\mu}g/mL$, respectively, and the LOQ of analytical method calculated as 0.01 mg/kg. The average recoveries at three spiking levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) were in the range of 71.2~95.4% with relative standard deviation of less than 12.1%. The developed method was simple and all optimized results was satisfied with the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. The present study could be served as a reference for the establishment of maximum residue limits (MRL) of kasugamycin and be used as basic data for safety management relative to kasugamycin residues in imported and domestic agricultural products.