• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.482-487
• /
• 2008

성능이 우수한 다성분계 전극을 개발하기 위하여 Ru를 주 전극성분으로 Pt, Sn, Sb 및 Gd를 보조 전극성분으로 하여 3, 4성분계 전극의 성능과 산화제 생성량 및 전극 표면 분석을 행하여 다음의 결과를 얻었다. 1. 2분 동안 단위 W당 제거된 RhB 농토는 Ru:Sn:Sb=9:1:1 > Ru:Pt:Gd=5:5:1 > Ru:Sn=9:1 > Ru:Sn:Gd=9:1:1 > Ru:Sb:Gd=9:1:1로 나타났다. Ru:Sn:Sb=9:1.1 전극에서 발생하는 free Cl, ClO$_2$ 및 H$_2$O$_2$농도가 다른 전극보다 높은 것으로 나타나 산화제 생성경향과 RhB 분해율과는 상관관계가 있는 것으로 사료되었다. 4성분계 전극 중에서 Ru:Sn:Sb:Gd 전극의 성능이 가장 우수한 것으로 나타났으나 3성분계 전극인 Ru:Sn:Sb=9:1.1 전극보다 성능이 떨어지는 것으로 나타났다. Ru:Sn:Sb=9:1:1 전극에서 생성되는 산화제 농도가 다른 두 종류의 산화제 농도보다 높은 것으로 나타났고 4성분 전극의 경우 Ru:Sn:Sb:Gd 전극의 산화제 농도가 Ru:Sn:Sb:Gd 전극이 높거나 유사한 경우로 나타나 산화제 생성 경향과 RhB분해 능과는 상관관계가 있는 것으로 나타났다. 초기 RhB 분해 속도가 높은 전극의 COD 제거율도 높은 것으로 나타났다. OH 라디칼은 발생하지 않지만 염소계 산화제 농도가 높고 RhB제거율이 높아 Ru를 주 성분으로 한 전극의 RhB분해는 주로 간접 산화작용에 의한 것이며, 개발된 3, 4성분계 산화물 전극은 간접 산화용 전극임을 알 수 있었다. 에칭을 하기 전의 Ti판은 표면이 매끄러운 것으로 나타났으며, 35% 염산으로 에칭한 후의 Ti메쉬는 매우 거친 표면조직을 가지는 것을 관찰할 수 있었다. Ru:Sn:Sb=9:1:1 전극과 Ru:Sn:Sb:Gd 전극의 SEM 사진을 관찰한 결과 두 전극 모두 전극 물질이 균일하게 도포되어 있었으며, 두 전극 모두 열소성을 통해 전극 성분을 코팅할 때 발생하는 "mud crack"이 발생한 것이 관찰되었다 EDX 분석에서 Cl이 관찰되었는데, 전극 성분의 불완전 산화로 인한 비양론적 산화물 때문이며 이는 RhB 분해성능과 관련 있는 것으로 사료되었다.

• Journal of the Korean institute of surface engineering
• /
• v.18 no.3
• /
• pp.116-124
• /
• 1985

Chemical vapor deposition of $SnO_2$ on Pyrex glass substrate has been investigated using $SnCl_4$ and Oxygen at relatively low temperatures(300-500$^{\circ}C$). The critical flow rate, which delineated the surface reaction controlled region from the mass transfer controlled region, was increased with deposition temperature. The apparent activation energy obtained in surface reaction controlled region was about 6Kcal/mole. The results show that deposition rate, electrical conductivity and transmittance were affected mainly by partial pressure of $SnCl_4$, but little by partial pressure f oxygen. The % transmission of 5000A-thick $SnO_2$ film was about 90% in visible spectrum region and sheet resistance was varied in 0.1-10${\Omega}$ per square shaped portion of the outer surface of the oxide.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2013

Tin oxide thin-films have been widely applied in various fields of high-technology industries due to their excellent physical and electric properties. Those applications are found in various sensors, heating elements of windshield windows, solar cells, flat panel displays as tranparent electrodes. In this study, we conducted an experiment for the deposition of $SnO_2$ on glass of 2nd Gen. size for the effective development of large-scale backplanes. As deposition temperatures or flow rates of the $SnCl_4$ as a precursor changed, the thickness of tin oxide thin-films, their sheet resistances, transmittances, and hazes varied considerably.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.332-338
• /
• 1997

$SnO_2$ as raw material of sensor for $NO_2$ detection was prepared by precipitating $SnCl_4$ solution with aqueous ammonia followed by calcining in air. The characterization of $SnO_2$ was carried out using FT-IR and XRD, and $SnO_2$ thick film sensor was fabricated by screen-printing method. The particle size of $SnO_2$ calcined at higher temperature increased due to the growth of crystalline. $SnO_2$ sensor fabricated by using $SnO_2$ sample calcined at $1000^{\circ}C$ followed by heat treatment at $700^{\circ}C$ exhibited excellent sensing characteristics and selectivity for $NO_2$ gas at the operating temperature of $250^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2006

The study is coated tin(IV) oxide coated on the titanium substrate electrodes by electrodepositon and dip-coating method and studied about that physical and electrochemical characterization by coating methods. After titanium substrate is etched in HCl, electrodespotion is coated $SnCl_2{\cdot}2H_2O$ in nitrate solution by pulse technique, dip-coating method is also used $SnCl_2{\cdot}2H_2O$ in 1;1V% HCl and coated by dipping and annealing process. tin(IV) oxide coated on titanium substrate electrodes by two coating methods are studied x-ray diffraction (XRD), scanning electron microscopy (SEM) to compare physical characterization of electrode and potential window by cyclic voltammetry (CV) to observe electrochemical characterization.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.233-236
• /
• 2008

Ru:Sn:Sb 전극의 성능에 영향을 미치는 인자에 대하여 조사하여 다음의 결과를 얻었다. 0.5-3 A로 전류를 변화시켰을 때 최적 전류는 2 A로 나타났다. 실험에 사용한 전해질의 RhB 분해 성능은 NaCl > KCl > HCl > Na$_2$SO$_4$로 나타났다. 최적 NaCl 농도는 1.75 g/L로 나타났다. 최적 공기 공급량은 2 L/min으로 최적 pH는 3으로 나타났다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.287-292
• /
• 2001

본 실험은 목적은 CRT(Cathode Ray Tube)용 청색 형광체인 ZnS:Ag 분말 표면에 액상법으로 SnO$_2$를 균일하게 코팅하는 공정조건을 연구하는 것이다. 용매로서 물을 사용하고, Sn의 공급물질로서 SnCl$_4$.4$H_2O$, 침전 촉매로서 CO(NH$_2$)$_2$를 각각 사용하여, 균일 침전 방법으로 ZnS:Ag 분말표면에 SnO$_2$를 코팅할 수 있었다. 초기에 첨가되는 SnCl$_4$.4$H_2O$의 량이 Sn/Zn의 몰비기준으로 0.017인 경우에 ZnS:Ag 분말표면에 Sn(OH)$_4$가 균일하게 코팅되지만, 그 이상 첨가되면 과량의 Sn(OH)$_4$가 입자들 사이에 응집되었다. 코팅된 Sn(OH)$_4$는 비정질 구조로 규명되었으며, 이를 SnO$_2$결정상으로 전이시키기 위하여 300~$700^{\circ}C$ 범위 내에서 열처리를 행하였다. 비정질 Sn(OH)$_4$는 20$0^{\circ}C$이하에서 탈수되었고 45$0^{\circ}C$부터 SnO$_2$로 결정화되기 시작하였다. 순수한 ZnS의 경우, 50$0^{\circ}C$이하에서는 상변화가 없으나, $600^{\circ}C$에서 일부 산화되었으며 $700^{\circ}C$에서는 완전히 ZnO로 산화되므로, ZnS의 산화방지 및 SnO$_2$의 결정화를 동시에 만족하는 최고 열처리온도는 50$0^{\circ}C$로 규명되었다. 그러나 ZnS에 SnO$_2$가 코팅된 시편의 경우에는 $600^{\circ}C$가 되어도 ZnS 상이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.109-121
• /
• 1991

For the analysis of mercury in blood and urine, many literatures have been reffered and many kinds of reducing agents for mercury reduction and many acids for pretreatmr are known to be varied. $So HNO_{3}$ and $H_{2}SO_{4}$ among acids and $SnCl_{2}$ and $NaBH_{4}$ as a reducing agent being chosen for the establishment of more efficient and less erroneous analysis, and comparing the absorbance by using vapor generator, the results are followings. 1. The difference of absorbance from concentration of $HNO_{3}$ and $H_{2} SO_{4}$ was not nearly found when mercury reduced by $NaBH_{4}$ after pretreatment. But for more precise analysis, conc acid treatment need to be used. 2. Higher absorbance was shown by using conto acid treatment (P<0.005) when mercury reduced by $NaBH_{4}$ after treating acid primer. And sample which has 99.5% reliability in T-test, treated by conc $H_{2}SO_{4}$(P<0.005) was shown higher absorbance than treat by CORC $HNO_{3}$. 3. The difference of absorbance was not in the slightest in higher 0.1 w/v% $NaBH_{4}$ proved by uruskal-wallis H-Test 4. Some difference of absorbance in $SnCl_{2}$(P<0.005) having 99.5% reliability was found but there was no difference in these 20 w/v% , 25 w/v% and 30 w/v% SnCl$_{2}$ by the experiment of T-test. 5. According to these test results, organic materials were much affect the absorballce when reducing mercury by using $SnCl_{2}$ rather than by $NaBH_{4}$. For bio sample which is contained various organic substances, reduclng agent $NaBH_{4}$ is a lot more efficient to reduce the error then $SnCl_{2}$. 6. analytic method for this study is as following. 7. As the recovery test was done by this, the rate of recovery was shown form 94% to 100.7% .

• Journal of the Korean Ceramic Society
• /
• v.29 no.4
• /
• pp.319-327
• /
• 1992

Sb-doped SnO2 films were formed on Corning glass 7059 substrate by chemical vapor deposition using simulataneous hydrolysis of SnCl4 and SbCl5. Fairly good transparent conducting film with a low resistivity of ~6$\times$10-4{{{{ OMEGA }}cm and high average optical transparency above ~85% in the range of visible light was obtained at the deposition condition of 50$0^{\circ}C$ and input-gas ratio, [Psbcl5/Psncl4] of 0.05. Film conductivity was improved without loosing optical transparency at light doping of Sb and found to be due to the increase of electron concentration. However, high doping of Sb into SnO2 film largely deteriorated conductivity, optical transparency and crystallinity of the film.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.377-384
• /
• 2007

This study has carried out a performance of dimensionally stable anode for the purpose of decolorization of Rhodamine B (RhB) in water. Seven kinds of 1, 2 and 3 component electrodes were prepared by plating and thermal deposition, which were coated by the oxides of Pt, Ru, Ir, Sn-Sb, Ir-Sn-Sb, Ru-Sn-Sb and Ru-Sn-Ti on Ti metal surface, respectively. Performance for RhB decolorization of the seven electrodes lay in: Ru-Sn-Ti/Ti ${\fallingdotseq}$ Ru-Sn-Sb/Ti > Ir-Sn-Sb/Ti > Sn-Sb/Ti > Ru/Ti > Ir/Ti > Pt/Ti. The effects of electrode area and distance, electrolyte type and concentration, current density and pH were investigated on the decolorization of RhB using Ru-Sn-Ti/Ti electrode. Decolorization of RhB was not influenced by electrode area and distance largely, however wattage was influenced by them. NaCl was superior to the decolorization of RhB than $Na_2SO_4$. Optimum NaCl dosage and current density were 0.5 g/L and $0.183A/cm^2$, respectively. The pH effect of decolorization of RhB was not significant within the range of 3-7.