• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.219-229
• /
• 2016

The purpose of this study was to investigate the dyeability of silk fabrics with sweet potato stem leaf extract. To obtain the optimal dyeing conditions it was examined at various dyeing conditions(temperature, pH, time and bath ratio). The dyeability and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. After dyeing, various color fastness(wash fastness, dry cleaning fastness, light fastness, rub fastness, and perspiration fastness) was measured and reviewed for UV protective, deodorant and antimicrobial functionality. The optimun output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 80 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and mordanting, it was found that among four mordants of $Alk(SO_4)_2$, $CuSO_4$, $SnCl_2$, and $FeSO_4$, post-mordanting with $SnCl_2$ showed the best results. Color fastness to dry cleaning, washing and rubbing was found strong at grade 4-5 and the grade to perspiration was as good as 3 while to light fastness was good at 4 as well. In aspects of functional properties, it showed excellent results of 98.3% UV protection rate and 88% deodorization rate. Antibacterial activity was 99.9% against staphylococcus aureus and 73.3% against klebisella pneumoniae. In conclusion, we validated that the dyestuffs from the disused sweet potato stem leaf extract would be useful as a natural dye material using the optimized conditions and dyeability for silk dyeing.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls using a chlorination method was demonstrated for complete conversion of Zr into $ZrCl_4$. A chlorination reaction was performed by reacting Zry-4 hulls for 8 h under a 70 cc/min $Cl_2$ + 70 cc/min Ar flow at $380^{\circ}C$. The initial weight of the reactant (51.7 g) decreased to 0.49 g after 8 h of operation, which is only 0.95wt% of the initial weight. The weight of the total reaction products was 121.7 g with a high Zr purity of 99.80wt%. Fe and Sn were identified as major (0.18wt%) and minor (0.02wt%) impurities of the reaction products, respectively. It was also shown that Zr exhibited a high recovery ratio of 96.95wt% with a relatively small experimental loss of 2.34wt%. Observation of the reaction residues revealed that the chlorination reaction was dominant along the longitudinal direction, and surface oxide layers remained as reaction residues. The high purity and recovery ratio of Zr proposed the feasibility of the chlorination technique as an effective hull waste treatment method.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.47-57
• /
• 2007

This study focused on the properties natural dyeing and natural material and on the development of functional material for well-being in apparel industry. Comus officinalis Siebold et Zuccarini is used as natural dyeing material which had been reported that have curable effect for unbalanced immunity, geriatric diseases like urinary tract system, diabetes, hypertension, arthritis, tinnitus, hyperhidrosis and women's diseases like hypermenorrhea. And this material also has anti-cancer effect so that can restraint cancer cells. 3 kinds tester of cotton, wool and silk are dyed by boiled with each dye (flower, fruits, bark of tree) as first dyeing and dried in the shade. These testers are done by post-mordanting method. Aluminium Potassium(Alk(SO4)2), Cuprie Sulfate($CuSO4{\cdot}5H2O$), Stannous Chloride($SnCl2{\cdot}2H2O$), Ferrous Sulfate($FeCl2{\cdot}4H2O$), Titanium Sulfate 24% aqueous solution(Ti(SO4)2) are used as mordants. Dyeing results of Comus officinalis Siebold et Zuccarini flower and bark are shown as yellow color series. And dyeing result of fruits is pink color series. Silk shows the best dyeing property. As the point of view for dyeing property, Ti, Sn, Fe would be the properchoice for mordant. Following results are extracted in this study. Yellow color is resulted in dyeing with Cornus officinalis flower as non-mordanting condition. Yellowish red color is come from dyeing with Comus officinalis fruit as non-mordanting condition. Grayish yellow tone is resulted in dyeing with bark as non-mordanting condition. Orange tone color with Ti-mordanting, green tone color with Sn-mordanting and gray tone color with Fe-mordanting is resulted respectively. However light-fastness of Comus officinalis(flower, fruit, bark) is very low as 1 or 2 level in non-mordanting condition, Comus officinalis flower dyeing is turned out 3 or 4 level and fruit dyeing is 4 or 5 level, bark dyeing is 2 or 3 level with Ti-mordanting respectively. Eventually Comus officinalis fruit has the best light-colorfastness property among all of dyes. dry cleaning colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, perspiration-colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, With these results, this study could conclude that dye-ability, colorfastness problem is getting better after mordanting process and practical usage would be possible.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1328_1329
• /
• 2009

Nano porous indium tin oxide (ITO) powder was synthesized employing a new route sol-gel combustion hybrid method using Ketjen Black as a fuel. The nano porous ITO powder was composed of $SnCl_4$-98.0% and $In(NO_3)_3{\cdot}XH_2O$-99.999%, produce with a $NH_4OH$ with sol-gel method as a catalyst [1,2]. Crystal structures were examined by powder X-ray diffraction (XRD), and those results show shaper intensity peak at $25.6^{\circ}(2{\Theta})$ of $SnO_2$ by increased sintering temperature. A particle morphology as well as crystal size was investigated by scanning electron microscopy(FE-SEM), and the size of the nano porous powder was found to be in the range of 20~30nm. ITO films could controlled by nano porous powder at various sintering temperature in this paper[3,4]. The sol-gel combustion method was offered simple and effective route for the synthesis of nano porous ITO powder[5].

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1445-1450
• /
• 2002

Solvolytic rate constants at 25 $^{\circ}C$ are reported for solvolysis of chlorodithioformate (1) in binary mixtures of water with acetone, ethanol, methanol, methanol-d, 50%methanol-d/50%D2O, and 2,2,2-trifluroethanol (TFE), and also in TFE-ethanol mixtures. The Grunwald-Winstein plot shows that the three aqueous mixtures exhibit dispersions into separate line. The correlation is improved only slightly by additional parameters NT for solvent nucleophilicity and/or I for aromatic ring parameter. Rate ratios in solvents of the same $Y_cl$ value, having different nucleophilicity provide measures of the minimum extent of nucleophilic solvent assistance, and the value of 3.35 for $[$k_{40EW}$/$k_97TFE$]_Y$ (EW = ethanol-water), is consistent with an essentially SN1 reaction mechanism. This study has shown that the magnitude of l, m and h values associated with a change of solvent composition is able to predict the SN1 reaction mechanism. log(k/$k_o$) = mY + lN + hI

• The Plant Pathology Journal
• /
• v.35 no.6
• /
• pp.684-691
• /
• 2019

Evolution of adaptive mechanisms to abiotic stress is essential for plant growth and development. Plants adapt to stress conditions by activating the abscisic acid (ABA) signaling pathway. It has been suggested that the ABA receptor, clade A protein phosphatase, SnRK2 type kinase, and SLAC1 anion channel are important components of the ABA signaling pathway. In this study, we report that the shaker type potassium (K⁺) channel, GORK, modulates plant responses to ABA and abiotic stresses. Our results indicate that the full length of PP2CA is needed to interact with the GORK C-terminal region. We identified a loss of function allele in gork that displayed ABA-hyposensitive phenotype. gork and pp2ca mutants showed opposite responses to ABA in seed germination and seedling growth. Additionally, gork mutant was tolerant to the NaCl and mannitol treatments, whereas pp2ca mutant was sensitive to the NaCl and mannitol treatments. Thus, our results indicate that GORK enhances the sensitivity to ABA and negatively regulates the mechanisms involved in high salinity and osmotic stresses via PP2CA-mediated signals.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.187-197
• /
• 1999

해양수산부가 개발 .운영 중인 항만운영정보시스템(PORT-MIS)은 선박입출항 관련 업무, 수출입 화물 반출입에 관한 업무, 항만시설물관리에 관한 업무, 의사결정지원시스템에 관한 업무 등 크게 4개 업무오 구성되어 있으며, 총 19개의 전자문서와 1,500여개의 단위 프로그램으로 구성되어 있다. 그동안 PORT-MIS를 권역별로 확대 운영하면서 발생한 여러 가지 문제점들을 보완하기 위해 해양수산부와 정보통신부(한국전산원)가 공동으로 $\ulcorner$수출입화물 일괄처리시스템 구축$\lrcorner$ 용역 사업을 현재 진행 중에 있다. 본 연구는 용역과업 내용에 포함되어 있지 않으면서 개선이 필요한 외항선(국전선.외국전선 포함) 선박입항보고서(최초.변경.최종)와 선박출항보고서(최초.변경.최종), 내항선입.출항신고서, 예선사용허가신청서 및 지정서, 도선사용허가신청서 및 지정서 등의 민원업무를, 사용자로 하여금 최소한의 노력으로 처리할 수 있도록 제출방법을 개선(EDI방식에서 온라인방식으로)하여 행정소요시간을 단축함으로써 PORT-MIS의 효율성을 높일 수 있는 방안을 제시하고자 한다. 이러한 노력을 통해 PORT-MIS EDI업무가 개선되어 선박입.출항보고를 1회롤 처리할 수 있다면 연간 29만9천건의 서류절감으로 약 1억3천7백만원의 물류비를 줄일 수 있으며, 시간 단축에 따른 간접비용을 계산하면 보다 많은 효과가 있다고 판단된다. 그리고 내항선입.출항신고서 및 예.도선업무를 EDI방식에서 온라인방식으로 전환함으로써 선사와 예선업체 및 도선사협회가 대화형식으로 업무처리가 이루어져 분쟁을 최소화 할 수 있다면, 전자문서 31만6천건/년 절감으로 1억3백만원/년의 예산이 절감될 것으로 예상된다.rr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• Resources Recycling
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2011

Solvent extraction experiments were carried out to recover and separate Ru(III) from aqueous hydrochloric acid media using TBP and Cyanex923. The efficiency of the extraction was studied under various experimental conditions, such as concentration of HCl and NaCl, concentration of extractant in the organic phase and temperature. The extraction behavior of metal impurities, such as Pt, Bi, Sn, Fe, Pb and Cu in mixed solutions was examined. From the experimental studies, it was found that the Cyanex923 resulted in higher extraction percentage of Ru than TBP. However TBP was more effective for the separation of Ru and Pt, Bi, Sn in mixed solutions than Cyanex923.

• Journal of Hydrogen and New Energy
• /
• v.13 no.1
• /
• pp.34-41
• /
• 2002

CdS and $TiO_2$ nanoparticles were made by the precipitation method and sol-gel method, respectively, and they were mixed mechanically and then treated with the hydrothermal processing. CdS-$TiO_2$ composite particulate films were thus prepared by casting CdS-$TiO_2$ mixed sol onto $SnO_2$ conducting glass and a subsequent heat-treatment at $400^{\circ}C$. Again, the physico-chemical and photoelectrochemical properties of these films were controlled by the surface treatment with $TiCl_4$ aqueous solution. The photocurrents and the hydrogen production rates measured under the present experimental conditions varied in the range of $3.5{\sim}4.5mA/cm^2$ and $0.3{\sim}1.8cc/cm^2$-hr, respectively, and showed the maximum values at the $CdS/[CdS+TiO_2]$ mole ratio of 0.2. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, Probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$ It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.69-77
• /
• 2020

With rapid increasing production and installation, recycling of photovoltaic modules has become the main issue. According to the research, the accumulation of waste modules will reach to 8600 tons in 2030. Moreover, Crystalline-silicon (c-Si) Photovoltaic modules account for more than 90% of the waste. C-Si PV modules contain 1.3% of weight of photovoltaic ribbon inside which contains the most of lead, tin and copper in the PV modules, which would cause environmental and humility problem. This study provided a valuable metal separation process for PV ribbons. Ribbons content 82.1% of Cu, 8.9% of Sn, 5.2% of Pb, and 3.1% of Ag. All of them were leached by 3M of hydrochloric acid in the optimal condition. Ag was halogenated to AgCl and precipitated. Cu ion was extracted and separated from Pb and Sn by Lix984N then stripped by 3M H2SO4. The effect of the optimal parameters of extraction was also studied in this essay. The maximum extraction efficiency of Cu ion was 99.64%. The separation condition of Pb and Sn were obtained by adjusting the pH value to 4 thought ammonia to precipitate and separate Pb and Sn. The recovery of Pb and Sn can reach 99%.