• 한국재료학회지
• /
• 제18권4호
• /
• pp.169-174
• /
• 2008

The structural and electrical properties of amorphous $BaSm_2Ti_4O_{12}$ (BSmT) films on a $TiN/SiO_2/Si$ substrate deposited using a RF magnetron sputtering method were investigated. The deposition of BSmT films was carried out at $300^{\circ}C$ in a mixed oxygen and argon ($O_2$ : Ar = 1 : 4) atmosphere with a total pressure of 8.0 mTorr. In particular, a 45 nm-thick amorphous BSmT film exhibited a high capacitance density and low dissipation factor of $7.60\;fF/{\mu}m2$ and 1.3%, respectively, with a dielectric constant of 38 at 100 kHz. Its capacitance showed very little change, even in GHz ranges from 1.0 GHz to 6.0 GHz. The quality factor of the BSmT film was as high as 67 at 6 GHz. The leakage current density of the BSmT film was also very low, at approximately $5.11\;nA/cm^2$ at 2 V; its conduction mechanism was explained by the the Poole-Frenkel emission. The quadratic voltage coefficient of capacitance of the BSmT film was approximately $698\;ppm/V^2$, which is higher than the required value (<$100\;ppm/V^2$) for RF application. This could be reduced by improving the process condition. The temperature coefficient of capacitance of the film was low at nearly $296\;ppm/^{\circ}C$ at 100 kHz. Therefore, amorphous BSmT grown on a TiN substrate is a viable candidate material for a metal-insulator-metal capacitor.

• 대한의생명과학회지
• /
• 제12권3호
• /
• pp.281-287
• /
• 2006

Cigarette smoke causes atypical structure of pulmonary and oxidative damage. Therefore, we carried out to determine if exposure to cigarette smoke alters pulmonary structure and anti-oxidant related enzyme in a animal model, when natural product extracts using by Nebulizer. The rat were divided into four groups: $H_2O-treated$ (Control), natural product (Camellia sinensis) extracts-treated (CS), natural product extracts-treated with cigarette smoke-exposed (CS+SM) and cigarette smoke-expose (SM). All groups are similar to Control group in weight, but SM group is lower than the other groups. Microscopic image of the pulmonary structure in SM group showed deleterious alterations in the morphology, but the other groups are maintained in normal structure. In anti-oxidant related enzymes, SOD (superoxide dismutase) and catalase, SM group represents the lowest enzyme activity among all groups. But G6PD (glucose-6-phosphate dehydrogenase) and LPO (lipid peroxidation) is SM group represents the highest enzyme activity among all groups. These result indicate that the natural product extracts is an efficient tissue protective substance against smoke-induced lung injury.

• 방사성폐기물학회지
• /
• 제10권2호
• /
• pp.125-132
• /
• 2012

염화희토류 수화물($RECl_3{\cdot}xH_2O$) 내 존재하는 수분을 제거하기 위하여 탈수화 장치를 제작하여 8가지(La, Ce, Nd, Pr, Sm. Eu, Gd, Y)$Cl_3{\cdot}xH_2O$에 대한 탈수화 실험을 수행하였다. 탈수화 과정 중 희토류옥시염화물의 형성을 억제하기 위하여 TGA 분석을 바탕으로 하여 단계적인 온도 상승($80{\rightarrow}150{\rightarrow}230^{\circ}C$)구간을 설정하였으며 증발된 수분의 원활한 이동을 위하여 예열된 Ar 가스와 vacuum pump를 이용하였다. 각 온도구간에서의 탈수화 정도를 살펴본 결과 $YCl_3{\cdot}xH_2O$를 제외한 염화희토류 수화물은 원자번호가 높을수록 높은 온도에서 더 많은 탈수화가 일어남을 알 수 있었다. 탈수화 과정 후 희토류옥시염화물의 형성은 보이지 않았으며 염화 희토류 수화물 내 수분을 10%이하로 감소시킬 수 있었다.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.163-167
• /
• 2013

A modified two-point impedance spectroscopy technique exploits the geometric constriction between an electrolyte and a cathode with an emphasis on semispherical-shaped electrolytes. The spatial limitation in the electrolyte/electrode interface leads to local amplification of the electrochemical reaction occurring in the corresponding electrolyte/electrode region. The modified impedance spectroscopy was applied to electrical monitoring of a YSZ ($Y_2O_3$-stabilized $ZrO_2$)/SSC ($Sm_{0.5}Sr_{0.5}CoO_3$) system. The resolved bulk and interfacial component was numerically analyzed in combination with an equivalent circuit model. The effectiveness of the "spreading resistance" concept is validated by analysis of the electrode polarization in the cathode materials of solid oxide fuel cells.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.851-856
• /
• 2002

The Reaction of S-methyl-S-cysteine(L-Smc) with racemic $s-cis-[Co(demba)Cl_2]-1$ (Hydmedba = $NN'-dimethylethylenediamine-NN'-di-\alpha-butyric$, acid) yields ${\Delta}$-s-cis-[Co(dmedba)(L-Smc)] 2 with N, O-chelation. Oxidation of sulfur of 2 with $H_2O_2$ in a 1 : 1 mole ratio gives ${\Delta}$-s-cis[Co(dmedba)(L-S(O)mc)] 3 having an uncoordinated sulfenate group. Oxidation of sulfur of L-Sm with $H_2O_2in$ a 1: 1 mole ratio produces S-methyl-L-cysteinesulfenate (L-S(O)me) 5. Direct reaction of 1 with 5 in basic medium gives an N.O-chelated ${\Delta}$s-cis[Co(dmedba)(L-S(O)mc)-N.O], which turmed out be same as obtained by oxidation of 2, while an N, S-chelated ${\Delta}$-s-cis-[Co(dmedba)(S-S(O)mc)-N,O] complex 4 is obtained in acidic medium from the reaction of 1 with 5. This is one of the rare $[$Co^{III}$(N_2O_2-type$ ligand)(amino acid)] type complex preparations, where the reaction conditions determine which mode of N, O and N, S caelation modes is favored.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권1호
• /
• pp.1-5
• /
• 2011

[ $CeO_2$ ]has been widely used for single buffer layer of coated conductor because of superior chemical and structural compatibility with $ReBa_2Cu_3O_{7-{\delta}}$(Re=Y, Nd, Sm, Gd, Dy, Ho, etc.). But, the surface of $CeO_2$ layer showed cracks because of the large difference in thermal expansion coefficient between metal substrate and deposited $CeO_2$ layer, when thickness of $CeO_2$ layer exceeds 100 nm on the biaxially textured Ni-3%W substrate. The deposition rate has been limited to be less than 6 $\AA$/sec in order to get a good epitaxy. In this research, we deposited $CeO_2$ single buffer layers on biaxially textured Ni-3%W substrate with 2-step process such as thin nucleation layer(>10 nm) with low deposition rate(3 $\AA$/sec) and thick homo epitaxial layer(>240 nm) with high deposition rate(30 $\AA$/sec). Effect of deposition temperature on degree of texture development was tested. Thick homo epitaxial $CeO_2$ layer with good texture without crack was obtained at $600^{\circ}C$, which has ${\Delta}{\phi}$ value of $6.2^{\circ}$, ${\Delta}{\omega}$ value of $4.3^{\circ}$ and average surface roughness(Ra) of 7.2 nm within $10{\mu}m{\times}10{\mu}m$ area. This result shows the possibility of preparing advanced Ni substrate with simplified architecture of single $CeO_2$ layer for low cost coated conductor.

• 대한화학회지
• /
• 제55권4호
• /
• pp.612-619
• /
• 2011

1,2-diphenyl-4-butyl-3,5-pyrazolidinedione(phenylbutazone, PB)의 란탄(III) 착물을 합성하여 원소분석, 몰전기전도도 측정, IR, UV-Vis. 및 NMR 스펙트럼으로 특성을 조사하였다. 스펙트럼 데이터로부터 PB가 pyrazolidinedione 고리의 두 카르보닐 산소를 통해 이배위 및 일이온화 리간드로 배위됨을 규명하였다. 몰전기전도도 데이터로부터 이들 착물이 비전해질임을 규명하였다. 이들 착물의 열적 행동을 공기 중에서 TG 및 DTG로 연구한 결과, 탈수화, 열적 안전성 및 열분해에 관한 정보를 얻을 수 있었다. 최종 생성물은 해당 금속의 산화물로 밝혀졌다. 탈수화 및 분해 단계에 대한 열역학 및 반응속도 파라메터를 구하였다. 분해 단계에 대한 음의 엔트로피 값은 반응물보다 활성화 착물이 더 질서있는 구조를 갖는다는 것을 의미하며, 이때 반응은 정상보다 느렸다. 이러한 연구를 바탕으로 착물의 분자식이 $[Ln(PB)_3]{\cdot}5H_2O$(Ln=La 및 Ce) 그리고 $[Ln(PB)_3 (H_2O)_2]{\cdot}2H_2O$(Ln=Pr, Nd 및 Sm)임을 규명하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.95-95
• /
• 2009

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.231-237
• /
• 2003

RE(Nd, Sm) elements doped (RE/Y)$_{1.8}$B $a_{2.4}$C $u_{3.4}$$O_{7-x}$ [(RE/Y)1.8] high $T_{c}$ superconductors were directionally grown by Top Seed Melt Growth(TSMG) process in air atmosphere. The (001)melt-textured N $d_{1.8}$B $a_{2.4}$C $u_{3.4}$ $O_{7-X}$(Nd1.8) seed crystals were used for achieving the c-axis alignment large grains perpendicular to surface of the samples. The (RE/Y)1.8 SEM micrographs of the melt-textured (RE/Y)1.8 samples revealed that the nonsuperconducting (RE/Y)211 inclusions are uniformly distributed in the superconducting (RE/Y)123 matrix except the region very close to the Nd seed crystal. The microstructure and superconducting properties were investigated by XRD, SEM, TEM and SQUID magnetometer. The Melt-textured (RE/Y)1.8 samples showed an onset $T_{c}$=91K and sharp superconducting transition. Also, the magnetization value of the (RE/Y)1.8 samples were compared with those of Y1.8 sample at 77 K. 77 K. 77 K. 77 K.K.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.804-810
• /
• 2003

건설폐기물 중 폐콘크리트를 40$0^{\circ}C$로 가열한 후 ball mill로 분쇄하여 재생골재를 생산할 때 발생된 미분말을 보통 포틀랜드 시멘트의 SiO$_2$, CaO, A1$_2$O$_3$원에 대한 대체원료물질로서 활용하고자 하였다. 클링커를 제조하기 위한 주원료는 석회석, shale, 전로슬래그, fly ash를 이용하였고, modulus는 LSF:91.0, SM:2.60, IM:1.60로 고정한 후 shale에 대해 미분말을 25, 50, 15, 100%까지 치환하여 클링커를 제조하였다. 클링커의 주요생성광물은 1,45$0^{\circ}C$에서 OPC와 같은 광물상인 $C_3$S, $\beta$-C$_2$S, $C_3$A, $C_4$AF 상으로 나타났다. 조합원료의 반응성을 비교하기 위해 시차열분석을 실시하고, 소성성지수를 구한 결과, 클링커의 광물상 생성온도는 plain과 유사했으며, 소성성지수는 48.6-51.4 정도로 나타났다.