• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.218-223
• /
• 1984

In order to analyze the effects of percolation rate on the growth and yield of rice plants in paddy soils, pot (1a/2000) experiments were carried out. The soil used was highly concentrated with various salts in the horticulture area under vinyl house cultivation, and Samgang variety of Japanica rice was planted. With the increasing rates of percolation, $SiO_2$ and $Ca^{2+}$ were more leached out from soils than supplied by irrigation while $K^+$ and $NH_4{^+}$ were more supplied to soils than leached out. The root activity in the late growth stage was higher in the percolation pots than in the non-percolation pots. Amounts of nutrient uptake of T-N, $P_2O_5$, $K_2O$ and MgO were increased gradually with the increase of percolation rate, but that of $SiO_2$ was maximum at 10mm per day. The percolation rate of 5~10mm per day was considered to be the optimum condition for obtaining more than 95% of relative yield in rice cultivation.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.455-462
• /
• 2014

This work investigated the hydrophobic coating of silicate yellow phosphor powder in the form of divalent europium-activated strontium orthosilicate ($Sr_2SiO_4:Eu^{2+}$) by using an atmospheric pressure dielectric barrier discharge (DBD) plasma with argon as a carrier and hexamethyldisiloxane (HMDSO), toluene and n-hexane as precursors. After the plasma treatment of the phosphor powder, the lattice structure of orthosilicate was not altered, as confirmed by an X-ray diffractometer. The coated phosphor powder was characterized by scanning electron microscopy, fluorescence spectrophotometry and contact angle analysis (CAA). The CAA of the phosphor powder coated with the HMDSO precursor revealed that the water contact angle increased from $21.3^{\circ}$ to $139.5^{\circ}$ (max. $148.7^{\circ}$) and the glycerol contact angle from $55^{\circ}$ to $143.5^{\circ}$ (max. $145.3^{\circ}$) as a result of the hydrophobic coating, which indicated that hydrophobic layers were successfully formed on the phosphor powder surfaces. Further surface characterizations were performed by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometry, which also evidenced the formation of hydrophobic coating layers. The phosphor coated with HMDSO exhibited a photoluminescence (PL) enhancement, but the use of toluene or n-hexane somewhat decreased the PL intensity. The results of this work suggest that the DBD plasma may be a viable method for the preparation of hydrophobic coating layer on phosphor powder.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.10
• /
• pp.1695-1700
• /
• 2008

An immunosensor based on surface plasmon resonance (SPR) with enhanced performance was developed through a mixed self-assembled monolayer. A mixture of 16-mercaptohexadecanic acid (16-MHA) and 1-undecanethiol with various molar ratios was self-assembled on gold (Au) surface and the carboxylic acid groups of 16-MHA were then coordinated to Zn ions by exposing the substrate to an ethanolic solution of $Zn(NO_3)_2\cdot 6H_2O$. The antibody was immobilized on the SPR surface by exposing the functionalized substrate to the desired solution of antibody in phosphate-buffered saline (PBS) molecules. The film formation in series was confirmed by SPR and atomic force microscopy (AFM). The functionalized surface was applied to develop an SPR immunosensor for detecting human serum albumin (HSA) and the estimated detection limit (DL) was 4.27 nM. The limit value concentration can be well measured between ill and healthy conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.542-543
• /
• 2012

Coherent diffraction imaging (CDI) method using hard x-ray at 5.46 keV was applied to study assembly of Ni and Ni oxide nano structures formed on a Si3N4 membrane. Density distribution of Ni nano-particles was obtained quantitatively with about 15 nm lateral resolution by reconstructing images from the speckle diffraction pattern. In addition, reconstructed images of nickel oxide particles indicated that Ni atoms diffuse out during the oxidation process leaving pores inside the nickel oxide crust. Furthermore, we recognize that really weak phase object, less than 5 nm thickness of Ni residues, can be reconstructed due to the reference particles. We achieved quantitative information of nanometer sized materials and demonstrate the effect of reference particles by using hard x-ray coherent diffractive imaging method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.1-5
• /
• 1980

Comparisons were made between pubescent and smooth leaved cultivars or lines for the brown planthopper feeding preference, adult emergence percent, nymphal period, grain yield and brown rice recovery percent, and found that there were no significant differences of the traits tested between smooth and pubescent.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.113-119
• /
• 2000

In this work, Pd/Pt gate MISFET sensor using Pd membrane was fabricated to detect the hydrogen in DI water. A differential pair-type was used to minimize the intrinsic voltage drift of the MISFET. To avoid hydrogen induced drift of the sensor, the silicon dioxide/silicon nitride double layer was used as the gate insulator of the FET's. In order to eliminate the blister formation on the surface of the hydrogen sensing gate metal, Pd/Pt double metal layer was deposited on the gate insulator. For this type of application sensors need to be isolated from the DI water, and a Pd membrane was used to separate the sensor from the DI water. The output voltage change due to the variation of hydrogen concentration is linear from 100ppm to 500 ppm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.293-293
• /
• 2010

최근 태양전지 연구에서 저가격화를 실현하는 방법 중 하나로 폐 실리콘 웨이퍼를 재생하는 방법에 관하여 많은 연구가 진행되고 있다. 그러나 기존 웨이퍼 재생공정은 높은 재처리 비용과 복잡한 공정등의 많은 단점을 가지고 있다. 챔버 내에 압축된 공기나 가스에 의해 가속된 미세 파우더들이 재료와 충돌하면서 식각하는 기계적 건식 식각 공정 기술이라고 할 수 있는 micro blaster 공정을 이용하면 기존 재생공정보다 낮은 재처리 비용과 간단한 공정으로 재생웨이퍼를 제작할 수 있다. 하지만 이러한 micro blaster 공정은 식각 후 표면에 많은 particle과 crack을 형성시켜 태양전지용으로 사용하기에 단점을 가진다. 본 연구에서는 이러한 micro blaster를 이용한 태양전지용 재생 웨이퍼를 제작하기 위해 폐 실리콘 웨이퍼의 표면 물질을 식각하고, 식각 후 충돌에 의해 발생된 표면의 particle과 crack을 DRE(Damage Remove Etching)공정으로 제거하는 연구를 진행 하였다. 먼저 폐 실리콘 웨이퍼와 같은 표면을 형성하기 위하여 시편 표면에 각각 Al($2000{\AA}$), $Si_3N_4(3000{\AA})$, $SiO_2(1{\mu}m)$, AZ1512($1{\mu}m$)을 형성하고 micro blaster의 파우더 크기, 압력, 스캔 속도 등의 공정 조건에 따라 폐 실리콘 웨이퍼 표면 물질을 식각하였다. 식각 후 폐 실리콘 웨이퍼의 식각된 깊이와 표면 물질 잔량을 측정하고, 폐 실리콘 웨이퍼의 표면에 particle과 crack, 요철이 형성되어 있는지를 확인하였다. 그 결과 폐 실리콘 웨이퍼에 형성된 물질의 두께 이상으로 식각되었으며, 표면 물질의 잔량이 남아 있지 않았고, 표면에 많은 particle과 crack, 요철이 형성되었다. 표면에 형성된 요철은 유지하면서 많은 particle과 crack을 제거하기 위하여 micro blaster공정 후 DRE 공정으로 표면 개선이 필요하였다. 이때 남겨진 요철은 입사광량을 증가시키고, 표면 반사율을 감소시켜 태양전지내의 흡수하는 빛의 양을 증가시키는 태양전지 texturing 공정 효과로 작용하게 된다. 표면에 남은 particle과 crack을 완전히 제거하면서 요철은 유지할 수 있게 HNA 용액의 농도와 시간에 따른 식각 정도를 측정하였다. DRE 공정 후 표면 particle과 crack이 완전히 제거되어 표면이 개선됨을 확인하였다. Micro blaster를 이용하여 폐 실리콘 웨이퍼의 표면을 식각하고, DRE공정으로 표면을 개선함으로써 태양전지용 기판으로의 재생 가능성을 확인하였다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.25-30
• /
• 2002

The ternary semiconducting compounds of the $A_{4}BX_{6}$(A=Cd, Zn, Hg; B=Si, Sn, Ge; X=S, Se, Te) type exhibit strong fluorescence and high photosensitivity in the visible and near infrared ranges, so these are supposed to be materials applicable to photoelectrical devices. These materials were synthesized and single crystals were first grown by Nitsche, who identified the crystal structure of the single crystals. In this paper. author describe the undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ single crystals were grown by the chemical transport reaction(CTR) method using iodine of $6mg/cm^{3}$ as a transport agent. For the crystal. growth, the temperature gradient of the CTR furnace was kep at $700^{\circ}C$ for the source aone and at $820^{\circ}C$ for the growth zone for 7-days. It was found from the analysis of x-ray diffraction that undoped and $Co^{2+}$-doped $Zn_{4}SnSe_{6}$ compounds have a monoclinic structure. The optical absorption spectra obtained near the fundamental absorption edge showed that these compounds have a direct energy gaps. These temperature dependence of the optical energy gap were closely investigated over the temperature range 10[K]~300[K]