• 한국재료학회지
• /
• 제18권5호
• /
• pp.241-246
• /
• 2008

Pure Mg and Mg-6wt.%Al alloy were coated by the plasma electrolytic oxidation with various coating times and the microstructural and mechanical characteristics of the coatings were investigated. The coatings on pure Mg and Mg-6wt.%Al alloy consisted of MgO and $Mg_2SiO_4$. The surface roughness and thickness of the coatings became larger as the coating time increased. The coatings on the Mg-6wt.%Al alloy were more uniform and thicker than those on pure Mg. The microhardness and friction coefficient of the coatings increased progressively as the coating time increased. In addition, the coatings on the Mg-6wt.%Al alloy compared to pure Mg showed improved microhardness and a better friction coefficient.

• 대한화학회지
• /
• 제44권1호
• /
• pp.60-67
• /
• 2000

표면공명흡수는 매질의 유전상수값에 의존한다. 금 나노미립자가 함침된 $TiO_2/SiO_2$ 복합산화물 박막을 $Ti(OPr^i)_4$과 $Si(OEt)_4$, 그리고 $HAuCl_4{\cdot}7H_2O$를 사용하여 졸-겔 방법으로 제조하였다. $TiO_2/SiO_2$ 박막에 함침된 금 나노미립자의 최대 표면 공명 흡수는 $TiO_2/SiO_2$의 몰비에 따라 540 nm에서 615 nm 까지 선형적으로 변하였다. 이러한 박막에 함침된 금 나노미립자의 크기와 구조를 TEM과 XRD로 측정하였다. 그리고 $TiO_2/SiO_2$ 박막의 유전상수값을 실험 data로부터 이론적으로 계산하였다

• 한국표면공학회지
• /
• 제22권2호
• /
• pp.78-87
• /
• 1989

Mechanism of formation of electroless composite coatings is similar to that of electrodeposited composite coating, but the amount of particles entraped in electroless coating is higher that the one of electrodeposited coatings. The methol of entrapment by the metal for SiC and Al2O3 particles is different from that for WC particles. In the former case the particles are gracually engulfed by the depositing metal, wheran with WC a metal envelope is rapidly fomed around each particles. This difference can be attributed to the difference in electrical resistivity of the particles. Inclusion density of SiC and Al2O3 particles during copeposition depend on the particle size, agitation condition, vabration conditions and electrolyte temperatures.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.66-72
• /
• 2005

Surface modification of the silicon-coated graphite was carried out at $200^{\circ}C\~800^{\circ}C$ under hydrogen atmosphere. The silicon-coated graphites were prepared by fluidized-bed spray coating method. The components of silicon films prepared on the graphite consist of SiO, $SiO_x\;(1. The components of silicon films at $200^{\circ}C$ of heat treatment brought on the higher fraction of SiO and $SiO_x$ than that of $SiO_2$. However, inactive $SiO_2$ fraction increases with increase of the heat treatment temperature. The high content of SiO and $SiO_x$ in the silicon film on graphite leads to the higher discharge capacity in our experimental range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.799-802
• /
• 2003

[ $LaNiO_3$ ](LNO) thin films were deposited on various substrates as Si and $Al_2O_3$ by sol-gel process using lanthanum nitrate and nickel acetate. The structure and orientation of the films were characterized by X-ray diffraction. The orientation factors of films on Si(100), Si(111), $SiO_2/Si(100)$ and $Al_2O_3$were 97%, 63%, 73%, and 24% respective. The conductivity was $7.6{\times}10^{-3}{\Omega}{\cdot}cm$ with 10 times coating at Si(100) substrate.

• 센서학회지
• /
• 제32권3호
• /
• pp.154-158
• /
• 2023

This study aimed to improve the moisture resistance of salt cores by investigating the suitability of a two-dimensional kaolinite colloidal solution and a commercially available SiO₂ ink solution as coating agents. X-ray diffraction analysis (XRD) results showed that the intercalation of urea into kaolinite did not significantly change its layer structure. Scanning electron microscopy (SEM) images revealed that the dip-coating only affected the surface of the salt core, and the texture of the surface is differ depending on the coating solution. The humidity absorption test results showed that both coatings reduced the hygroscopicity of the salt core by more than 50%. However, in the water-solubility test, the kaolinite dissolved with the salt core, whereas the SiO₂-coated salt core left a residue. These results strongly suggest that with the coating of the exfoliated kaolinite solution, salt core will remain stable in humid environments.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.237-242
• /
• 1998

$80SiO_2-20TiO_2$(mol%)의 무색투명한 비정질 박막을 현미경용 슬라이드 유리판과 사파이어 위에 tetraethyl orthosilicate와 titanium trichloride의 전구체 용액을 사용하여 스핀코팅방법으로 제조하였다. 코팅 후 $750^{\circ}C$에서 열처리된 박막은 높은 투과율과 낮은 반사율을 보였다. 슬라이드 유리판에 코팅한 $SiO_2-TiO_2$ 박막의 경우에 나트륨이온과 산소 간의 강한 상호작용에 의하여 고온과 높은 습도에서도 안정성이 우수하였다.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.84-88
• /
• 2002

SiO₂와 ZrO₂를 코팅물질로 사용하는 안경 렌즈의 5층 코팅을 설계하였다. 제5층의 두께를 변화시키면서 반사율을 계산하고, RGB의 반사율을 이용하여 반사된 빛의 색상을 시각화하였다. 그 결과 5층의 두께가 5nm부터 80nm까지 점점 두꺼워지면서 반사광의 붉은 색상이 점점 감소하였고 80nm에서 점점 두꺼워질수록 푸른 색상이 증가하였다. 색상의 분석은 Photoshop 5.0을 이용하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.66-69
• /
• 2003

Various semiconductor nanowires such as GaN, GaP, InP, Si$_3$N$_4$, SiO$_2$/Si, and SiC were coated conformally with aluminum oxide (Al$_2$O$_3$) layers by atomic layer deposition (ALD) using trimethylaluminum (TMA) and distilled water ($H_2O$) at a temperature of 20$0^{\circ}C$. Transmission electron microscopy (TEM) revealed that A1203 cylindrical shells conformally coat the semiconductor nanowires. This study suggests that the ALD of $Al_2$O$_3$ on nanowires is a promising method for preparing cylindrical dielectric shells for coaxially gated nanowire field-effect transistors.

• Journal of Welding and Joining
• /
• 제22권5호
• /
• pp.46-52
• /
• 2004

AlSi-Al$_2$O$_3$ composite layer was prepared by plasma spray on steel substrate. The composite powder for plasma spray was prepared by simple mechanical blending. The wear resistance of the composite layers and matrix aluminum alloy were performed in terms of size distribution of ceramic particles. Friction coefficients of AlSi were decreased with incorporation of $Al_2$O$_3$. The tribological properties of coated layers were affected by the size of incorporated $Al_2$O$_3$ particle. The reinforcement of $Al_2$O$_3$ particle into aluminum alloy matrix decreased the friction coefficient as well as wear loss.