• Clean Technology
• /
• v.24 no.3
• /
• pp.249-254
• /
• 2018

In order to improve the photo conversion efficiency (${\eta}$) of dye-sensitized solar cells (DSSCs), the electrospun $TiO_2$, $SiO_2$, $ZrO_2$ and $SnO_2$ nanofibers were added into the hydrothermally prepared $TiO_2$ nanoparticles for application to a photoelectrode for DSSCs. The $TiO_2$ nanofiber added photoelectrode exhibited a higher photo current density ($J_{sc}$) compared to the bare $TiO_2$ nanoparticles, which is caused from acceleration of the transfer of excited electron from dye molecule due to the nanofiber structure. The DSSCs with $SiO_2$ nanofibers shows a higher open circuit voltage ($V_{oc}$) of 0.67 V and the highest photo conversion efficiency was found to be 6.24%.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.83-87
• /
• 1999

부유대용융법에 의하여 전이금속, 희토류금속, 및 3A족 금속이온의 종류와 농도를 조절하면서 Rutile 단결정을 성장하였으며, 결정결함과 1.55 ㎛에서의 광 투과도에 미치는 각 불순이온의 영향을 조사하였다. 주입된 불순이온 중에서 양호한 결정형을 나타내는 이온은 V5+, Fe3+, Al3+, Zr4+, Ga3+, Sc3+이었으며, Al3+, Zr4+, Sc3+ 이온은 우수한 투과도를 나타내었다. 성장된 결정 중에서 가장 양호한 결정형을 제공하고, 산소결핍 및 low-angle grain boundaries의 형성을 최대로 억제하며, 양호한 투과도를 나타낸 우수한 품질의 Rutile 단결정은 TiO2 99.4 at%-Al2O3 0.6 at%로 평가되었다.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.152-156
• /
• 2004

The dielectric and piezoelectric properties of 0.36Pb($Sc_{1/2}Nb_{1/2}$)$O_{3}$-0.25Pb($Ni_{1/3}Nb_{2/3}$)$O_{3}$-0.39Pb$TiO_{3}$ (hereafter PSNNT) at the morphotropic phase boundary (MPB) composition were investigated with $0{\sim}2.5$ mot% $MnO_{2}$ doping. Bulk density, dielectric loss and tetragonality of crystal structure were all improved with increasing $MnO_{2}$ additive content. With increasing $MnO_{2}$ additive content, the electromechanical coupling factor and quality factor were also increased: Electromechanical coupling $k_{p}$ and quality factor $Q_{m}$ at 2.0 mol% $MnO_{2}$ doping with were showed highest values of 55.6 % and 252, respectively.

• Korean Journal of Weed Science
• /
• v.14 no.1
• /
• pp.28-33
• /
• 1994

This study was conducted to investigate the efficacy of weed control by pyributicarb{O-[3-tert-butylphenyl] N-[6-methoxy-2-pyridyl]-N-methyl thiocarbamate}/bensulfuron-methyl{methyl 2-[[[[[[4, 6-dimethoxypyrimidin-2-yl] amino] carbonyl] amino] sulfonyl] methyl] benzoate} SC and oxadiazon{5-tert-butyl-3-[2,4-dichloro-5-isopropoxyphenyl]-1,3,4-oxadiazol-2(3)-one}/bensulfuron-methyl SC, and to develope weed control methods for paddy rice. There was little difference between suspension concentrate and granule of pyributicarb/bensulfuron-methyl and oxadiazon/bensulfuron-methyl combination in the effect of weed control. Pyributicarb/bensulfuron-methyl SC and oxadiazon/bensulfuron-methyl SC were diffused from the point of application to 6m. Pyributicarb/bensulfuron-methyl SC applied on water surface from irrigation inlet and in paddy water from dike controlled more than 90% of weeds. Pyributicarb/bensulfuron-methyl SC was precipitated about 1-2cm per 1 hour after dripping on water surface. The efficacy of weed control by pyributicarb/bensulfuron-methyl SC was higher in 0-1cm than in 6-7cm standing water depth.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.489-493
• /
• 2016

Scandia ($Sc2O_3$)-stabilized zirconia (ScSZ) electrolyte-supported symmetrical solid oxide electrolyzer cells (SOECs), in which lanthanum strontium cobalt ferrite (LSCF)-gadolinia ($Gd_2O_3$)-doped ceria (GDC) composite materials are used as both the cathode and anode, were fabricated and their high temperature steam electrolysis (HTSE) performance was investigated. Current density-voltage curves were obtained for cells operated in 10% $H_2O$/90% Ar at 750, 800, and $850^{\circ}C$. It was possible to determine the ohmic, cathodic, and anodic contributions to the total overpotential using the three-electrode technique. The HTSE performance was significantly improved in the symmetrical cell with LSCF-GDC electrodes compared to the cell consisting of an Ni-YSZ cathode and LSCF-GDC anode. It was found that the overpotential due to the LSCF-GDC cathode largely decreased and, at a given current density, the total cell voltage decreased, which resulted in the enhanced hydrogen production rate in the symmetrical cell.

• Journal of Ceramic Processing Research
• /
• v.20 no.3
• /
• pp.276-279
• /
• 2019

New green-emitting Sr4ScAl3O10:Eu2+ phosphor was prepared using a novel melt quenching synthesis method. The temperature of raw materials irradiated with the strong light of the Xe arc-lamp was rose up to about 2273 K, followed by a sharp drop in the temperature after turn off the lamp. This method is a useful tool for rapid screening of novel phosphor materials.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.305-314
• /
• 2002

For the Exp. 1, a total of seventy two pigs (10.53${\pm}$0.02kg average initial body weight) were used in a 38-d growth assay to determine the effects of Saccharomyces cerevisiae (SC) supplementation on growth performance and fecal microbial populations. Dietary treatments included 1) CON (corn-dried whey-SBM based diet), 2) SC0.2 (CON diet+0.2% SC) and 3) SC0.4 (CON diet+0.4% SC). Through the entire experimental period, ADG, ADFI and gain/feed were not significantly different among the treatments. At d 7 and 14 after the onset of the experiment, fecal Lactobacilli sp. count increased as the concentration of SC in the diets was increased (linear effect, P$<$0.01). At d 7 after the onset of the experiment, fecal Escherichia coli count decreased as the concentration of SC in the diets was increased (linear effect, P$<$0.02, quadratic effect, P$<$0.03). For the Exp. 2, forty five pigs (49.71${\pm}$0.45kg average initial body weight) were used in a 28-d growth assay to determine the effects of complex probiotics (CPB, Phichia anomala ST, Galactomyces geotrichum SR59, Thiobacillus sp.) supplementation on growth performance, nutrient digestibility and fecal $NH_3$-N and volatile fatty acid concentrations. Dietary treatments included 1) CON (corn-SBM based diet), 2) CPB0.2 (CON diet+0.2% CPB) and 3) CPB0.3 (CON diet+0.3% CPB). Through the entire experimental period, pigs fed CPB0.3 diet significantly increased their ADG compared to pigs fed CON and CPB0.2 diets (P$<$0.05). Also, apparent digestibility of DM and N in pigs fed CPB0.3 diet was greater than for pigs fed CON diet (P$<$0.05). Fecal $NH_3$-N decreased (P$<$0.05) in the pigs fed CPB diet compared to pigs fed CON diets. Also, pigs fed CPB0.3 diet significantly decreased their fecal propionic acid compared to pigs fed CON diets (P$<$0.05). In conclusion, the results obtained from these feeding trials suggest that the dietary SC for nursery pigs affects fecal microbial population. In finishing pigs, supplemental CPB was effective to improve ADG and nutrient digestibility but to decrease fecal noxious gas emission.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.311-314
• /
• 2011

Application of self-assembled monolayers (SAMs) to the fabrication of organic thin film transistor has been recently reported very often since it can help to provide ohmic contact between films as well as to form simple and effective electrode pattern. Accordingly, quality of these ultra-thin films is becoming more imperative. In this study, in order to manufacture a high quality SAM pattern, a hydrophobic alkylsilane monolayer and a hydrophilic aminosilane monolayer were selectively coated on $SiO_2$ surface through the consecutive procedures of a micro-contact printing (${\mu}CP$) and dip-coating methods under extremely dry condition. On a SAM pattern cleaned with SC1 solution immediately after ${\mu}CP$, poly(3,4-ethylenedioxythiophene) (PEDOT) source and drain electrode array were very selectively and nicely vapour phase polymerized. On the other side, on a SC1-untreated SAM pattern, PEDOT array was very poorly polymerized. It strongly suggests that the SC1 cleaning process effectively removes unwanted contaminants on SAM pattern, thereby resulting in very selective growth of PEDOT electrode pattern.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.623-641
• /
• 2012

The Janggun lead-zinc-silver deposit is hydrothermal-metasomatic deposit. We have sampled wallrock, hydrother-maly-altered rock and lead-zinc-silver ore vein to study the element dispersion during wallrock alteration. The hydrothermal alteration that is remarkably recognized at this deposit consists of rhodochrositization and dolomitization. Wallrock is dolomite and limestone that consisit of calcite, dolomite, quartz, phlogopite and biotite. Rhodochrosite zone occurs near lead-zinc-silver ore vein and include mainly rhodochrosite with amounts of calcite, dolomite, kutnahorite, arsenopyrite, pyrite, chalcopyrite, sphalerite, galena and stannite. Dolomite zone occurs far from lead-zinc-silver ore vein and is composed of mainly dolomite and minor calcite, rhodochrosite, pyrite, sphalerite, chalcopyrite, galena and stannite. The correlation coefficients among major, trace and rare earth elements during wallrock alteration show high positive correlations(dolomite and limestone = $Fe_2O_3(T)$/MnO, Ga/MnO and Rb/MnO), high negative correlations(dolomite = MgO/MnO, CaO/MnO, $CO_2$/MnO, Sr/MnO; limestone = CaO/MnO, Sr/MnO). Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, MnO, As, Au, Cd, Cu, Ga, Pb, Rb, Sb, Sc, Sn and Zn. Remarkable loss elements are CaO, $CO_2$, MgO and Sr. Therefore, elements(CaO, $CO_2$, $Fe_2O_3(T)$, MgO, MnO, Ga, Pb, Rb, Sb, Sn, Sr and Zn) represent a potential tools for exploration in hydrothermal-metasomatic lead-zinc-silver deposits.

• Korean Journal of Materials Research
• /
• v.29 no.8
• /
• pp.491-496
• /
• 2019

In this study, we prepare pure $WO_3$ inverse opal(IO) film with a thickness of approximately $3{\mu}m$ by electrodeposition, and an ultra-thin $TiO_2$ layer having a thickness of 2 nm is deposited on $WO_3$ IO film by atomic layer deposition. Both sets of photoelectrochemical properties are evaluated after developing dye-sensitized solar cells(DSSCs). In addition, morphological, crystalline and optical properties of the developed films are evaluated through field-emission scanning electron microscopy(FE-SEM), High-resolution transmission electron microscopy(HR-TEM), X-ray diffraction(XRD) and UV/visible/infrared spectrophotometry. In particular, pure $WO_3$ IO based DSSCs show low $V_{OC}$, $J_{SC}$ and fill factor of 0.25 V, $0.89mA/cm^2$ and 18.9 %, achieving an efficiency of 0.04 %, whereas the $TiO_2/WO_3$ IO based DSSCs exhibit $V_{OC}$, $J_{SC}$ and fill factor of 0.57 V, $1.18mA/cm^2$ and 50.1 %, revealing an overall conversion efficiency of 0.34 %, probably attributable to the high dye adsorption and suppressed charge recombination reaction.