• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.75-95
• /
• 2002

The Andong pluton in the Andong Batholith is composed of comagmatic plutonic rocks, in which the lithofacies comprise hornblende biotite tonalite in the central paft biotite granodiorite in the marginal paft and porphyritic biotite granite at the topside (noJthea~tern paft) of the pluton. The pluton is petrographically and petrochemically zoned, having more mafic center than margin and topside. Distribution pallern of the lithofacies represents a reverse zoning in the pluton. Modal and chemical data in the pluton show progressive and gradual compositional variations from the centrer via the margin to the topside. Quartz and K-teldspar increase toward the topside of the pluton, whereas hornblende, biotite and color index increase toward the center. The bulk composition in the pluton is also reversely zoned, with high $Si0_2$ and $K_{2}O$ in the topside facies, and high MnO, CaO, $Ti0_2$, $Fe_{2}O_{3}$t, MgO and $P_{2}O_{5}$ in the central facies. The reverse zoning is also evident in higher Cr. V, Ni, Sc and Sr of the more mafic tonalite in the interior. The reversely zoned pluton results from remobilization (resurgence) of the lower more mafic compositional zone into the upper more felsic zones of the pluton modified by thennogravitational diffusion and fractional crystallization. In the initial stages of evolution, the pluton was a petrochemical system that fonned chemical compositional zonation with mafic tonalitic magma in the lower. granodioritic one in the middle and granitic one in the upper paft of the magma chamber. Periodic influxes of more mafic magma from the ba~e resulted in mingling of liquids and redistribution of minerals, and may have triggered the remobilil.ation of the lower compositional zone into the upper more felsic zones.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.276-282
• /
• 2016

A 2 Gbit/s visible-light communication (VLC) scheme using time-frequency color-clustered (TFCC) multiple-input multiple-output (MIMO) based on blue, cyan, yellow, and red (BCYR) light-emitting diodes (LEDs) is presented. In the proposed scheme, BCYR LEDs are employed to form four different color clusters. Data transmission using the four color clusters is performed in MIMO, so that the scheme achieves a very high speed of data transmission. Moreover, the scheme employs the TFCC strategy to yield high performance in terms of bit error rate (BER). TFCC operates in such a way that the original data and the two delayed versions of the data are multiplied by orthogonal frequencies and then transmitted using a specific color of the BCYR LED. In the receiver, color filters are employed to detect the data transmitted from the desired cluster. Selection combining (SC) is also performed to yield a diversity effect within each color cluster, to further improve the performance. Performance evaluation demonstrates that the proposed TFCC MIMO VLC offers a data rate of 2 Gbit/s and a bit error rate of 4×10^-5, at an E_b/N_o value of merely 3 dB.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.15-20
• /
• 2011

Poly[2,3-dimethyl-5,8-dithiophene-2-yl-quinoxaline-alt-9,9-dihexyl-9H-fluorene] (PFTQT) and poly[2,3-dimethyl-5,8-dithiophen-2-yl-quinoxaline-alt-10-hexyl-10H-phenothiazine (PPTTQT) based on 2,3-dimethyl-5,8-dithiophen-2-yl-quinoxaline weresynthesized by Suzuki coupling reaction. All polymers were soluble in common organic solvents such as chloroform, chlorobenzene, o-dichlorobenzene, tetrahydrofuran (THF) and toluene. The maximum absorption wavelength and band gap of PFTQT were 440 nm and 2.30 eV, and PPTTQT were 445 nm and 2.23 eV, respectively. The HOMO and LUMO energy level of PFTQT were -6.05 and -3.75 eV, and PPTTQT were -5,89 and -3.66 eV, respectively. The organic photovoltaic devices based on the blend of polymer and PCBM (1 : 2 by weight ratio) were fabricated. Efficiencies of devices were 0.24% (PFTQT) and 0.16% (PPTTQT), respectively. The short circuit current density ($J_{sc}$), fill factor (FF), and open circuit voltage ($V_{oc}$) of the device with PFTQT were $0.97mA/cm^2$, 29% and 0.86 V, and the device based on PPTTQT were $0.80mA/cm^2$, 28% and 0.71 V, 31% and 0.71 V, respectively, under air mass (AM) 1.5 G and 1 sun condition ($100mA/cm^2$).

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.309-311
• /
• 2007

Supramolecules containing double hydrogen bonding sites at their both chain ends were self-polymerized to become solid state polymer and were utilized to improve the efficiency of solid state DSSCs. Hydrogen bonding sites were attached at the chain ends of PEG of Mw=2000, such as pyrimethamine and glutaric acid. The solar cell with the solid state supramolecular polymer electrolyte resulted in the overall energy conversion efficiency of 4.63 % with a short circuit current density $(J_{sc})$ of 10.41 $mAcm^{-2}$, an open circuit voltage $V_{oc}$, of 0.71 V and a fill factor (FF) of 0.62 at one sun condition ([oligomer]:[1-methyl-3-propyl imidazolium iodide (MPII)]:$[I_2]$ = 20 : 1 : 0.19, active area = 0.16 $cm^2$, $TiO_2$ layer thickness = 10 ${\mu}m$). The ionic conductivity of the sol id state electrolyte was $5.11{\times}10^{-4}$ (S/cm). The cell performance was characterized by electrochemical impedance spectroscopy and ionic conductivity.

• Clean Technology
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2009

Catalytic hydrodechlorination of PCBs (polychlorinated biphenyls) included in the transformer oil was carried out to detoxify PCBs and to recycle the treated oil. Catalysts such as 0.98 wt% Pt and 0.79 wt% Pd on ${\gamma}$-alumina (${\gamma}-Al_2O_3$) support, 12.8 wt% Ni on ${\gamma}-Al_2O_3$, and 57.6 wt% Ni on silica-alumina ($SiO_2-Al_2O_3$) support were used for the catalytic hydrodechlorination. Various supercritical fluids such as carbon dioxide, propane and isobutane were used as reaction media. The effects of reaction temperature, reaction time, catalysts, and supercritical fluids on the catalytic hydrodechlorination were examined in detail. The detoxification degree increased in the order of Ni > Pd > Pt. This is possibly due to higher metal loading and larger metal size of the Ni catalyst. Below $175^{\circ}C,\;scCO_2$ was found as the most effective reaction media for the catalytic hydrodechlorination of PCBs included in the transformer oil.

• Journal of the Korean Vacuum Society
• /
• v.18 no.5
• /
• pp.390-393
• /
• 2009

We report on a new patterning technique for organic functional materials applicable to organic photovoltacis (OPVs). The unconventioal patterning technique, $O_2$ plsama-etching selectively perfluoro-alkyl fluorosilanes, is used for producing a bulk-heterojunction active layer with poly(3-hexylthiophene) as the electron donor and [6,6]-phenyl-$C_{61}$ butyric acid methyl ester as the electron acceptor. The patterning with reduced leakage path and parasitic capacitance suggests a way for fabrication of OPVs with higher energy conversion efficiency.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.26-36
• /
• 2008

Due to the differential and low voltage swing, Low Voltage Differential Signaling(LVDS) has been widely used for high speed data transmission with low power consumption. This paper proposes new LVDS I/O interface circuits for more than 1.3 Gb/s operation. The LVDS receiver proposed in this paper utilizes a sense amp for the pre-amp instead of a conventional differential pre-amp. The proposed LVDS allows more than 1.3 Gb/s transmission speed with significantly reduced driver output voltage. Also, in order to further improve the power consumption and noise performance, this paper introduces an inductance impedance matching technique which can eliminate the termination resistor. A new form of unfolded impedance matching method has been developed to accomplish the impedance matching for LVDS receivers with a sense amplifier as well as with a differential amplifier. The proposed LVDS I/O circuits have been extensively simulated using HSPICE based on 0.35um TSMC CMOS technology. The simulation results show improved power gain and transmission rate by ${\sim}12%$ and ${\sim}18%$, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1235-1243
• /
• 2011

In this study, we investigated the antioxidative activity (scavenging activity of 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical and superoxide anion radical) and anti-obesity effects of black bean chungkugjang extract (BBCE). DPPH free radical-scavenging activity and superoxide anion radical-scavenging activity ($SC_{50}$ value) of BBCE were $162.7{\pm}2.8$ ppm, and $205.62{\pm}3.6$ ppm, respectively. The anti-obesity effects of BBCE were investigated by measuring Oil Red O staining in 3T3-L1 adipocytes. BBCE reduced the content of Oil Red O dye in 3T3-L1 adipocytes. We also examined the effects of BBCE on adiposity, serum lipid, and leptin levels in obese mice fed a high-fat diet. Mice were fed the BBCE experimental diets for 7 weeks, after which they were sacrificed. ICR male mice were randomly divided into three groups, one normal diet group (ND group) and two high fat diet groups with or without BBCE supplementation (HFD group and HFD-BBCE group). The results showed that weight gain and the food efficiency ratio significantly decreased upon addition of BBCE compared to those of the HFD group. Further, white adipose tissue weights of epididymal, mesenteric, and retroperitoneal areas in the HFD-BBCE group were reduced to 34.8%, 7.1%, and 40.6%, respectively, compared to that of the HFD group. The serum levels of triglycerides, total cholesterol, LDL-cholesterol, and leptin in the HFD-BBCE group were significantly lower than those of the HFD group. Based on these results, it can be concluded that BBCE may have beneficial effects on reducing fat mass and serum lipid content.

• Structural Engineering and Mechanics
• /
• v.85 no.3
• /
• pp.305-314
• /
• 2023

The article is about the theoretical analysis of the transmission and reflection of elastic waves through the interface of perfectly connected materials. The solid continuum mediums considered are piezoelectric semiconductors and transversely isotropic in nature. The connection among the mediums is considered in such a way that it holds the continuity property of field variables at the interface. The concept of strain and stress introduced by non-local theory is also being involved to make the study more applicable It is found that, the incident wave results in the generation of four reflected and three transmitted waves including the thermal and elastic waves. The thermal waves generated in the medium are encountered by using the concept of three phase lag heat model along with fractional ordered time thermoelasticity. The results obtained are calculated graphically for a ZnO material with piezoelectric semiconductor properties for medium M₁ and CdSc material with transversely isotropic elastic properties for medium M₂. The influence of fractional order parameter, non-local parameter, and steady carrier density parameter on the amplitude ratios of reflected and refraction waves are studied graphically by MATLAB.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.91-95
• /
• 2009

To examine physico-chemical properties of the polysaccharide extracted from liquid-cultured mycelia of Schizophyllum commune, each the polysaccharide was extracted with hot water treatment and then fractionated with ethanol, alkaline solution and ultrafiltration. And we determined carbohydrate contents, composition of amino acids, infra-red spectrum and viscosity. Carbohydrate contents of polysaccharide treated with ethanol and ultrafiltration were 72.0% and 62.3%, and proteins content were 15.3% and 32.0% respectively. The carbohydrate consisted of four monosaccharides and the protein contained 16 amino acids. The polysaccharide obtained from ultrafiltration was shown an absorption band characteristic of the ${\beta}$-glycosidic linkage by infra red spectra. These results suggest that the polysaccharide extracted from Schizophyllum commune showed the characteristics of proteinbounded polysaccharide, and it was ${\beta}$-glycosidic linkage with strong viscosity.