• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1697-1701
• /
• 2016

The leakage conduction and critical voltage characteristic of ZnO ceramic were investigated as a function of $Sb_2O_3$ concentration. Leakage conduction in the ohmic region increased with increasing $Sb_2O_3$ concentration and was attributed to the potential barrier height. The nonlinear coefficient increased with an increasing amount of $Sb_2O_3$. It was found that increases in the apparent critical voltages were associated with the lowered donor concentration in the grain boundary of between two ZnO grains. And the decrease of donor concentration on doping with $Sb_2O_3$ additive was attributed to the lowered capacitance in the grain boundary layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.294-299
• /
• 2000

For practical application as a humidity sensor SnO$_2$thick films devices were fabricated on the refresh type electrode by screen printing method and their material and humidity sensing properties were investigated. As a function of Sb$_{2}$/O$_{3}$ addition rate grain size was increased while porosity and initial resistance were rapidly decreased. And the area of resistance variation according to relative humidity was decreased with increasing heat treatment temperature. SnO$_2$thick film device heat treated at 95$0^{\circ}C$ and contained 0.05mole% Sb$_{2}$/O$_{3}$ had a best humidity sensing properties. From this result it is conformed that humidity sensing properties of SnO$_2$thick film devices could be approved by very small amount of Sb$_{2}$/O$_{3}$ addition.

• Resources Recycling
• /
• v.16 no.4
• /
• pp.17-26
• /
• 2007

Inorganic shell powder waste was added to recycled polypropylene(COPP), and its effect on the mechanical properties and flammability was investigated. Compatibilizer(Polytail H) was added to improve mechanical properties of COPP/shell composites. Also three different flame retardants($Al_2O_3$, DBDPO, $Sb_2O_3$) were added to improve flammability. Experimental results indicated that addition of compatibilizer resulted in an improved mechanical properties, and especially impact strength approached that of 100 wt% COPP. Addition of flame retardant did not result in decreased mechanical properties. UL-94 flammability test indicated that COPP/shell composite did not show good flame retardancy, however, in the case of COPP/shell composites containing flame retardant showed good flammability. flammability was found $Sb_2O_3>Al_2O_3>DBDPO$ in this order. Finally, UL-94 V-0 grade was found in COPP/shell composite with $Al_2O_3$, compatibilizer, and 40 wt% shell, and COPP/shell composites with $Sb_2O_3$.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.516-523
• /
• 2021

A study using selective catalytic reduction (SCR) was conducted in conjunction with ammonia as a reducing agent for controlling nitrogen oxides, a typical secondary inducer of fine dust in the atmosphere. For NH₃-SCR experiments, a commercial catalyst of V/W/TiO₂ only and also V/W-Sb/TiO₂ catalyst with Sb were used, and phosphorous durability was confirmed. As a result of NH₃-SCR experiments, it was confirmed that the addition of Sb to V/W/TiO₂ had durability against phosphorous. In addition, the physical and chemical properties were comparatively analyzed through BET, XPS, H₂-TPR, NH₃-TPD, and FT-IR analysis. From the anaylsis results, when Sb was added to V/W/TiO₂ catalyst, P was also added resulting in the formation of SbPO₄ and the generation of VOPO₄ was suppressed. The phosphorous durability was confirmed by maintaining the redox characteristics of the catalyst before P was added.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.236-239
• /
• 1999

This paper is the study for electrical characteristic of PZT ceramics with Sb$_2$O$_3$, CoO additive. Effect of Sb$_2$O$_3$, CoO additive ranged from 0.0 wt% to 1.2wt% on the electrical characteristic of the PZT ceramics have been investigated. In the case of Sb$_2$O$_3$ 0.6wt%, the maximum vague of mechanical quality factor(Qm) was obtained 124.11 at l15$0^{\circ}C$. And, additive CoO 1.2wt% was obtained 184.12 at l15$0^{\circ}C$. The electromechanical coupling factor(kp) was increased by increasing the amount of Sb$_2$O$_3$, CoO additive. The maximum value of electromechanical coupling factor(kp) was obtained 58.35 with Sb$_2$O$_3$1.2wt% additive at l15$0^{\circ}C$. Dopped with additive CoO 0.9wt%, electromechanical coupling factor(kp) was obtained 47.84 at 115$0^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.199-200
• /
• 2008

ZnO을 주원료로 하고 첨가제로 $Bi_2O_3$, $Sb_2O_3$, $Nd_2O_3$, CoO, $Cr_2O_3$, $MnO_2$, NiO를 고정한 후 $Y_2O_3$ 첨가량에 바리스터의 전기적 특성을 검토하였다. $Y_2O_3$ 첨가량이 증가할 수록 바리스터 전압이 직선적으로 증가함을 확인할 수 있으며 결정립계에 존재하는 스핀넬상에 $Y_2O_3$가 이차상으로 존재함을 확인 할 수 있었다. $Y_2O_3$ 첨가에 따라 ZnO 결정입자 성장을 방해하여 바리스터 전압을 증가시키는 반면 결정립의 크기를 불균일하게 하여 유전율을 감소시키고 유전손실은 증가함을 확인하였다. 본 연구 결과 $Y_2O_3$ 첨가로 바리스터 전압은 350 V/mm이상을 얻을 수 있으며 누설전류를 $1{\mu}A$이하로 하는 조성을 얻을 수 있었으며 소형 바리스터 제작이 가능함을 확인하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.834-839
• /
• 2000

The structural properties that SEM photograph of ZnO varistors surface studied by fractal mathematics program were investigated to verify the relations of electrical characteristics. The SEM photograph of ZnO varistors surface were changed by binary code and the grain shape of that were analyzed by fractal dimension. The void of ZnO varistors surface was found by fractal program. The relation between grain density and electrical properties depend on fractal dimension. The grain size in ZnO varistors surface was decreased by increasing of Sb$_2$O$_3$ addition. The spinel structure was formed by Sb$_2$O$_3$addition and it was depressed the ZnO grain formation. The grain size of ZnO by Sb$_2$O$_3$addition were from 5 to 10[${\mu}{\textrm}{m}$]. Among of ZnO varistors, fractal dimension of ZnO4 was very high as a 1.764. The density of grain boundary in ZnO2 and ZnO3 varistors surface was 15[%] by formed spinal structure. The breakdown electric field of ZnO2 that fractal dimension has 1.752 was very high to be 8.5[kV/cm]. When the fractal dimensin was high, the grain shape of ZnO varistors was complex and the serial layers of ZnO grain was increased.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.21-29
• /
• 2008

Waste shell powder was added to the high density polyethylene(HDPE), and resultant mechanical properties and flame retardancy were analyzed in terms of shell content. Compatibilizer(PE-g-MA) was used to enhance the mechanical properties of the prepared HDPE/shell composites, and several flame retardant agents($Al_2O_3$, $Sb_2O_3$) were utilized to improve flame retardancy. Addition of the compatibilizer resulted in an improved mechanical properties due to the increased interfacial bonding between HDPE matrix and shell powder. In the case of impact strength, it even reached to the impact strength of pure HDPE. Also the addition of the flame retardant agents did not exhibit mechanical property decrease. UL-94 flammability test on the prepared HDPE/shell composites indicated that at 40wt% of shell only inclusion, time to ignite the flame and the total time of flame duration increased. When flame retardant agents mixed with shell powder were added to the HDPE matrix, improved flame retardancy was observed. Generally, flame retardancy effect of $Al_2O_3$ was better than $Sb_2O_3$. UL-94 V-0 classification was observed for the specimens with $Al_2O_3$ and compatibilizer at more than 40wt% shell, and also for specimens with $Sb_2O_3$ and compatibilizer at all shell content.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1041-1046
• /
• 1999

(Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스와 소결조제로서 ($B_2$$O_3$.Li$_2$O)의 첨가에 따른 마이크로파 유전특성 및 미세구조에 미치는 영향에 대하여 연구하였다. 1.0 mol.% $Sb_2$O(sub)5를 첨가하고 130$0^{\circ}C$에서 5시간 소결한 (Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스의 경우 ($B_2$$O_3$.Li$_2$O)첨가량 증가에 따라 치밀화 및 결정립 성장에 의해 유전상수와 Q.f값은 증가하여 첨가량이 0.35wt.%에서 최대값인 38과 59,000을 각각 나타내었으며, 0.50wt.% 이상 첨가한 경우에서는 제 2상의 생성으로 인하여 감소하였다. 1.0 mol% Sb$_2$O(sub)5와 0.35wt.% ($B_2$$O_3$.$Li_2$O)를 첨가한 (Zr(sub)0.8Sn(sub)0.2)TiO$_4$세라믹스를 125$0^{\circ}C$와 135$0^{\circ}C$에서 5시간 소결한 경우에는 각각 미반응 TiO$_2$의 존재와 과대입자성장에 의한 결정립내기공의 생성으로 인하여 마이크로파 유전특성은 저하되었다.

• Electrical & Electronic Materials
• /
• v.6 no.4
• /
• pp.311-317
• /
• 1993

발열체 소자에 있어서 발열체의 방사스펙트럼과 피가열체의 흡수스펙트럼을 일치시키는 문제는 효과적인 가열을 위하여 매우 중요한 연구과제이다. 본 연구는 재료의 합성기술과 열처리기술을 이용하여 PTC 서머스터의 R-T특성은 그대로 유지시키면서 원적외선 방사특성을 증대시키기 위한 것이다. 이를 위하여 BaTiO$_{3}$+1.67Al$_{2}$O$_{3}$+3.75SiO$_{2}$+1.25TiO$_{2}$을 기본조성으로 하고 여기에 첨가제로서 Sb$_{2}$O$_{3}$와 MnO$_{2}$를 선정하여 이의 첨가량과 소결온도 그리고 소결온도구배를 파라메터로한 시편을 제작하였으며 각 시편의 IR특성과 R-T특성등을 측정 검토한 결과 파장 4.5-14.5[.mu.m]범위에서 방사율 0.8이상의 고효율 원적외선 방사특성을 얻었다.