• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.426-436
• /
• 2000

Given a linear arrangement of n base stations which generate multiple types of traffic among themselves, we consider the problem of finding a set of disjoint clusters to cover n base statons so that a cluster is assigned a location server. Our goal is to minimize the total communication cost for the entire network where the cost of intra-cluster communication is usually lower than that of intercluster communication for each type of traffic. The optimization problem is transformed into an equivavalent problem using the concept of relative cost, which generates the difference of communication costs between intracluster and intercluster communications. Using the relative cost matrix, an efficient algorithm of O($mm^2$), where m is the number of clusters in a partition, is designed by dynamic programming. The algorithm also finds all thevalid partitions in the same polynomial time, given the size constraint on a cluster, and the total allowable communication cost for the entire network.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.352-358
• /
• 2000

Preparation for the simplified separation of chitosandoligosaccharides from enzymatic hydrolysate was investigated. Two different types of chitosan beads as substrate were prepared as organic-based bead by W/O emulsion method and water-based bead by alkaline treatement. The average size of organic-based bead was $200{\mu}m$, and that of water based beads were $4000{\mu}m$, $100{\mu}m$, $30{\mu}m$, in diameter respectively. Enzyme stability was maintained over 80% at PH 6 after 24 hours. The optimal condition for the production of chitosanoligosaccharides was at pH 6.0, $50^{\circ}C$ and 40U (200U/g-chitosan) According to final oligosaccharide concentration water-based bed showed the similar result with that of organic-based bead even through it had smaller surface area attacked by chitosanse than that of organic-based bead. It is probable that the structure of water-based chitosan bead was looser than that of organic-based bead so enzyme penetrated easily into the bead structure. For the oligosaccharide production versus surface area the different size of water-based beads was investigated, Maxiaml production yield was observed in the $30{\mu}m$ beads. Consequently the water-based chitosan bead was better than the organic-based bead in this reaction system.

• Journal of Dairy Science and Biotechnology
• /
• v.31 no.2
• /
• pp.153-159
• /
• 2013

Lactic acid bacteria are microorganisms that are closely associated with human and/or animal environments, and are categorized as generally recognized as safe (GRAS) organisms due to their ubiquitous appearance in foods and their contribution to the healthy microflora of mucosal surfaces. This study was performed to isolate and identify lactic acid bacteria with antagonistic effects against food-borne pathogens. A total of 3,000 acid-producing bacteria were isolated from infant feces, cattle feces, goat feces, dog feces, pig feces, vaginal tracts, vegetables, fruits, Kimchi, Jeotgal, fermented sausages, raw milk, cheese, yogurt, Cheonggukjang, Meju, and Makgeolli cultured on MRS agar with 0.05% bromocresol purple. For the isolation of bacteriocin-producing bacteria, the diameter of the clear zone was measured on MRS agar plates. Twenty-six isolates exhibited strong antibacterial activity against indicator strains such as Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella enterica serovar Enteritidis. Lactic acid bacteria were identified as Enterococcus faecalis, Enterococcus faecium, Enterococcus hirae, Lactobacillus acidophilus, Lactobacillus amylovorus, Lactobacillus curvatus, Lactobacillus plantarum, and Pediococcus acidilactici by 16S rDNA gene sequence analysis. The results of this study suggest that the isolates could be used as potential probiotic starters for functional food applications.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.263-267
• /
• 2007

Parabens are used in nearly all types of cosmetics and toiletries because they are formulated well and have broad spectrum of activity, interness, low costs and excellent chemical stability in relation to pH. 2-phenoxyethanol and chlorphenesin are common preservatives which are usually used in combination with parabens in cosmetics. Toxicity of parabens is generally low but application of parabens to damaged or broken skin has resulted in sensitization. Moreover, the possibility of their estrogenic potential, anesthetic effects and reproductive toxicity has been reported. Consequently there are some regulations in use of parabens. And the maximum permitted concentrations of chlorphenesin and 2-phenoxyethanol in cosmetic products are authorized by the same reasons. So it is important to control and estimate the amount of parabens in products. In this article, we proposed a valid method for the simultaneous determination of 8 preservatives including parabens in a short time using ultra performance liquid $chromatography^{TM}\;(UPLC^{TM})$. Separation of eight components was achieved in less than 10 min and resolutions were reasonable (USP resolution ${\geqq}\;2$). And limit of detection and quantification were evaluated. The method was suitably validated for specificity, linearity, precision (repeatability, intermediate precision) and accuracy for assay (recovery) based on International conference on harmonisation (ICH) guideline. The method was applicable to analysis of preservatives in cosmetic products.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.99.1-99.1
• /
• 2015

ALD와 CVD 공정을 진행 하는데 있어서 전구체의 평가 및 실시간 분해과정을 확인 하는 것은 매우 중요하다. 본 실험에서는 고유전 산화막에 쓰이는 Cyclopentadienyl Tris (dimethylamino) Zirconium, CpZr(NMe2)3 전구체의 증기압 특성과 FTIR, QMS를 활용하여 $250^{\circ}C$ 온도구간 에서의 분해과정을 실시간으로 측정 하였다. CpZr(NMe2)3의 Atomic mass 는 288 amu이며 증기압은 $60^{\circ}C$에서 0.075 Torr로 측정되었다. 온도가 증가 함에 따라 FTIR 에서 CH3 symmetric stretch (2776 cm-1), CH3 symmetric stretch (2865 cm-1) intensity가 줄어 들게 되었으며 QMS에서도 15 amu (Methyl)의 신호가 온도가 증가함에 따라 감소함을 확인 할수 있었다. QMS에서 Cp의 이온전류가 사라진 이유는 Cp가 모체인 CpZr에서 모두 다 분리되었고 신호가 없어 졌기 때문이다. 본 연구를 통해서 FTIR 단독으로는 얻을수 없는 온도에 따른 세부적인 분해과정을 QMS로 실시간 측정 함으로서 FTIR의 분석 결과와 산호보완 할수 있게 되었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.79-88
• /
• 2001

The target such as aircraft operates flares to protect itself from the missile. In general, Infra-red(IR) flares that are hot bodies radiating energy considerably greater than it does, so cause the missile to guide the flare instead of the target. For a precise target tracking in spite of a presence of flares, therefore, the seeker should discriminate the target signal from various clutters including the flare and the background. In this paper, we simulated 2-color rosette scan seeker using IR and UV(UltraViolet) bands. In each wave band, we analyzed the radiant distributions of the target, the flare, and background. These results showed that a simultaneous process in two bands can detect precisely the target.

• Membrane Journal
• /
• v.4 no.2
• /
• pp.106-112
• /
• 1994

The ultrafiltration(UF) and reverse osmosis(RO) tests for a model metal plating wastewater prepared with zinc sulfate, showed the zinc ion rejection coefficient of over 99% and the permeate flux of $1.49 {\times} 10^{-3}cm/sec$ at pH = 8.3. The effect of cyanide on the zinc removal was investigated. When the amount of cyanide addition was same the zinc content, the zinc was removed over 99% and the cyanide was excluded about 93%. The addition of the surfactants such a LAS-Na and EDTA-Na was found to reduce the permeate flux down to $0.76 {\times} 10^{-3}cm/sec$ at the RO membrane.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.189-194
• /
• 2013

A sulfonated activated carbon (AC-$SO_3H$) was used as a solid acid catalyst for dehydration of sorbitol to isosorbide and its catalytic performance was compared with the commercial solid acid such as acidic ion exchange resin, Amberlyst-36, and sulfated copper oxide. The catalytic performance with 100% sorbitol conversion and 52% isosorbide selectivity was obtained over AC-$SO_3H$ at 423.15 K. Although AC-$SO_3H$ possessed only 0.5 mmol/g of sulfur content, it showed the similar dehydration activity of sorbitol to isosorbide with Amberlyst-36 (5.4 mmol/g) at 423.15 K. Based on the high thermal and chemical stability of AC-$SO_3H$, one-step reactive distillation, where isosorbide separation can be carried out simultaneously with sorbitol dehydration, was tried to increase the recovery yield of isosobide from sorbitol. The reactive distillation process using AC-$SO_3H$, the turnover number of AC-$SO_3H$ was 4 times higher than the conventional two-step process using sulfuric acid.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2001

Isolation and Characterization of Cathepsin B inhibitor Produced by Streptomyces luteogriseus KT-IO. Han, Kil~Hwan and Sang~Dal Kim*. Department of Applied Microbiology, Yeungnam Universit}/t Kyongsan 712749, Korea - The cathepsin B inhibitor produced by Streptomyces luteogriseus KT-IO was very stable in heat, acidic and alkaline conditions. The cathepsin B inhibitor was isolated from the extracted fraction of culture broth with butanol, methanol and chloroform subsequently, the inhibitor was purified with following several column chromatography sLlch as DEAE-Sephadex A-25, Sephadex G-15, silica gel 60, Sephadex LH-20, and preparative HPLC. The cathepsin B inhibitor showed positively to detective reaction of ninhydrine, 5% H2S04, iodine, but negatively to the reaction of Ehrlich's reagent, DNS, aniline. The molecular formular of cathepsin B inhibitor was elucidated by JR, lH and 13C-NMR, FAB mass and elemental analyzer. Consequently, it was identified as C4HlI04N6. The cathepsin B inhibitor had the mode of competitive inhibition with the reaction of cathepsin B.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.259-266
• /
• 2010

Porous poly(propylene) supported gel polymer electrolytes (GPE) were synthesized by thermal polymerization of DEGDMA [Di(ethylene glycol) dimethacrylate] in electrolyte solutions (1 M solution of $LiPF_6$ in EC/DEC 1 : 1 mixture) at $70^{\circ}C$. AC impedance spectroscopy and cyclic voltammetry were used to evaluate its ionic conductivity and electrochemical stability window of the GPE membranes. Lithium ion battery (LIB) cells were also fabricated with $LiNi_{0.8}Co_{0.2}O_2$/graphite and GPE membranes via thermal polymerization process. Through the thermal polymerization, self sustaining GPE membranes with sufficient ionic conductivities (over $10^{-3}\;S/cm$) and electrochemical stabilities. The LIB cell with 5% monomer showed the best rate-capability and cycleability.