• 제목/요약/키워드: $Ru^{+3}

검색결과 829건 처리시간 0.023초

Ni/Ru-K/Al2O3 촉매를 이용한 톨루엔 수증기 개질 (Steam Reforming of Toluene over Ni/Ru-K/Al2O3 Catalyst)

  • 오건웅;박서윤;이재구;윤상준
    • 한국수소및신에너지학회논문집
    • /
    • 제25권5호
    • /
    • pp.459-467
    • /
    • 2014
  • The catalytic steam reforming of toluene, a major component of biomass tar, was studied using several catalysts at various temperatures $400-800^{\circ}C$, kind of metal, and metal loading content. Ru and K promoted Ni-base catalyst were prepared, and used for steam reforming of toluene with steam/toluene molar ratio of 25. Concentration of toluene in reactant flow is $30g/Nm^3$ that is usual content of tar from biomass gasifier. The result from experiments showed that $H_2$ content in product gas and toluene conversion increased with temperature. Where in high temperature range, CO and $CO_2$ content in product gas were affected mainly by Boudouard reaction. Ni/Ru-K(3wt%)/$Al_2O_3$ catalyst showed best performance on steam reforming of toluene than used catalysts in this study at whole temperature. Catalysts have been characterized by XRD, TG. XRD analysis displayed that Ni particle size on Ni/Ru-K (3wt%)/$Al_2O_3$ catalyst was 29.4nm. Activation energy of Ni/Ru-K (3wt%)/$Al_2O_3$ catalyst was calculated 36.8kJ/mol by Arrhenius plot.

Superconductivty and magnetic properties of $(Ru_{1-x}Nb_x)Sr_2(Sm_{1.4}Ce_{0.6})Cu_2O_z$

  • Lee, H.K.;Bae, S.M.;Lee, J.M.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제15권3호
    • /
    • pp.1-4
    • /
    • 2013
  • We investigated the effect of Nb substitution for Ru on the structural and magnetic properties of $(Ru_{1-x}Nb_x)\;Sr_2(Sm_{1.4}Ce_{0.6})Cu_2O_z$ Samples. X-ray diffraction measurements indicated that nearly single-phase samples are formed in the range from x = 0 to 1.0. The superconducting transition temperature determined from the inflection in the field-cooled magnetic susceptibility decreased only slightly from $T_c$ = 25 K for x = 0 to $T_c$ = 22 K for x = 1.0, in consistent with the change in room temperature thermopower of the samples. However, the Nb substitution for Ru above x = 0.25 significantly suppressed the weak ferromagnetic component of the field-cooled magnetic susceptibility. It was also found that the Nb substitution for Ru results in an enhanced diamagnetic susceptibility with Nb content above x = 0.5 in both zero field-cooled and field-cooled magnetization measurements, in contrast to the behavior of the samples with $x{\leq}0.5$ in which the diamagnetic susceptibility decreases as the Nb content increases.

Ruthenium Thin Films Grown by Atomic Layer Deposition

  • Shin, Woong-Chul;Choi, Kyu-Jeong;Jung, Hyun-June;Yoon, Soon-Gil;Kim, Soo-Hyun
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.12-12
    • /
    • 2008
  • Ruthenium is one of the noble metals having good thermal and chemical stability, low resistivity, and relatively high work function(4.71eV). Because of these good physical, chemical, and electrical properties, Ru thin films have been extensively studied for various applications in semiconductor devices such as gate electrode for FET, capacitor electrodes for dynamic random access memories(DRAMs) with high-k dielectrics such as $Ta_2O_5$ and (Ba,Sr)$TiO_3$, and capacitor electrode for ferroelectric random access memories(FRAMs) with Pb(Zr,Ti)$O_3$. Additionally, Ru thin films have been studied for copper(Cu) seed layers for Cu electrochemical plating(ECP) in metallization process because of its good adhesion to and immiscibility with Cu. We investigated Ru thin films by thermal ALD with various deposition parameters such as deposition temperature, oxygen flow rate, and source pulse time. Ru thin films were grown by ALD(Lucida D100, NCD Co.) using RuDi as precursor and $O_2$ gas as a reactant at 200~$350^{\circ}C$.

  • PDF

고 탄화수소 개질을 위한 Pt-Ru, Pt-Ni 이원금속촉매에 관한 연구 (Pt-Ru, Pt-Ni bi-metallic catalysts for heavy hydrocarbon reforming)

  • 이상호;배중면
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.97.2-97.2
    • /
    • 2011
  • Pt-Ru and Pt-Ni bimetallic catalysts were prepared and tested for heavy hydrocarbon reforming. Metals were supported on CGO($Ce_{0.8}Gd_{0.2}O_{2.0-x}$) by incipient wetness method. The prepared catalysts were characterized by Temperature programmed reduction(TPR). Oxidative steam reforming of n-dodecane was conducted to compare the activity of the catalysts. The reforming temperature was varied from $500^{\circ}C$ to $800^{\circ}C$ at fixed $O_2$/C of 0.3, $H_2O$/C of 3.0 and GHSV of 5,000/h.Reduction peaks of metal oxide, surface CGO and bulk CGO were detected. Reduction temperature of metal oxide decreased over the bi-metallic catalysts. It is considered that interaction between metals leads to decrease interaction between metal and oxygen. On the other hands, reduction temperatures of surface CGO were dectected in the order of Pt-Ru > Pt-Ni > Pt. low reduction temperatures of surface CGO indicates the low activation energy for oxygen ion conduction to metal. Oxygen ion conduction is known as de-coking mechanism of ionic conducting supports such as CGO. In activity test, fuel conversion was in the same order of Pt-Ru > Pt-Ni > Pt. Especially, 100% of fuel conversion was obtained over Pt-Ru catalysts at $500^{\circ}C$.

  • PDF

$RuO_2$ Related Schottky contact for GaN/AlGaN device

  • Jung, Byung-Kwon;Kim, Jung-Kyu;Lee, Jung-Hee;Hahm, Sung-Ho
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
    • /
    • pp.85-90
    • /
    • 2002
  • $RuO_2$/GaN and related contacts were investigated for Schottky contacts in GaN-Based optical and electronic devices. We demonstrated that an $RuO_2$ film forms a stable Schottky contact on a GaN layer with a barrier height (${\Phi}_B$) of 1.46 eV and transmittance of 70% in the visible and near UV region. $RuO_2$/GaN Schottky diode showed a breakdown at over -50V and leakage current of only 0.3 nA at -5V. The $RuO_2$/GaN Schottky type photodetector had the UV/Visible rejection ratio of over $10^5$ and the responsivity of 0.23 A/W at 330 nm. The $RuO_2$ gate AlGaN/GaN EFET exhibited high drain current ($I_d$) of 689.3 mA/mm and high transconductance ($g_m$) of 197.4 mS/mm. Cut-Off frequency ($f_t$) and maximum operating frequency ($f_{max}$) were measured as 27.0 GHz and 45.5 GHz, respectively.

  • PDF

Artificial Photosynthesis Using Zeolites

  • Castagnola, Norma B.;Dutta, Prabir K.
    • Journal of Photoscience
    • /
    • 제6권3호
    • /
    • pp.91-96
    • /
    • 1999
  • Zeolites and microporouos materials continue to attract attention as novel hosts for photochemical reactions. Zeolities are attractive because of their ability to selectivity exchange and incorporate species within the void spaces and interconnecting channels, providing a spatial arrangement of molecules. Our research has primarily focused on intrazeolitic electron transfer from excited Ru(bpy)32+ in supercages of zeolite Y to a series of bipyridinium ions. In the Ru(bpy)32+ viologen-zeolite Y samples, the slowing of the back electron transfer from the bipyridinium radical cation to Ru(bpy)32+ allows for charge propagation via self exchange between diquat molecules. This provides an opportunity for permanent charge separation. When the migrating charge on the diquat radical within the zeolite reaches the surface, it can be transferred to a neutral viologen (PVS) in solution, resulting in permanent charge separation. The advantage of long-lived charge separation can be exploited for useful chemistry if suitable catablysts can be assembled on the zeolities. We have studied Ru(bpy)2 as water oxdiation catalysts. We have demonstrated that synthesis of RuO2 fibers on a zeolite via thermal decomposition of Ru3(CO)12 leads to the most active water decomposition catalyst reported to date. Because of the extensive interest of photochemical water reduction to H2, much is known about catalytic systems usin gone electron catalyst, and even more importantly, that no reaction of viologen occurred with H2 over this catalyst. The present challenge is to incorporate all these elements of the system into an architecture and we are examining zeolite membranes for this purpose.

  • PDF

혼합반도체 시스템에서의 광화학적 수소제조 : CdS-WO3/RuO2, CdS-TiO2 (Photochemical hydrogen production from coupled semiconductor systems : CdS-WO3/RuO2, CdS-TiO2)

  • 서정기;허귀석
    • 한국수소및신에너지학회논문집
    • /
    • 제4권2호
    • /
    • pp.5-15
    • /
    • 1993
  • Hydrogen production in visible light with the following semiconductor systems, $CdS-WO_3$, $CdS-TiO_2$, have been investigated in the presence of redox catalyst (Pt, $RuO_2$). MeOH, EtOH, isopropanol, sulfide/sulfite mixture, lactic acid were used as sacrifical reagents. The optimal condition for $H_2$ evolution was found to be in qgueous lactic acid media for $CdS-WO_3/RuO_2$. The photochemical efficiency for this system was 1.05 % and the $H_2$ evolution rate was 26.5ml/min. at $6.07{\times}10^{-5}$ einstein/sec photon rate

  • PDF

이성분계 금속합금($MoRu_3$, $MoRh_3$)의 합성 및 구조분석 (Synthesis and Structural Analysis of Binary Alloy ($MoRu_3$, $MoRh_3$))

  • 박용준;이종규;김종구;김정석;지광용
    • 분석과학
    • /
    • 제11권3호
    • /
    • pp.189-193
    • /
    • 1998
  • 조사후 핵연료의 용해실험 다음에 잔류된 불용성 잔유물을 구성하는 Mo, Ru, Rh 등의 원소로 이루어진 이성분계 합금인 $MoRu_3$$MoRh_3$을 아르곤 아아크로를 이용하여 $1700^{\circ}C$ 이상의 고온에서 합성하였다. 이들 합금의 정확한 구조와 결정격자상수는 ICDD(International Centre for Diffraction Data)에서 제작되는 분말회절수집철(JCPDS files) 등에 수록된 바가 없다. X선 회절분석결과 이들 두 합금은 육방밀집구조와 $P6_3/mmc$의 공간군을 갖는 $WRh_3$의 구조와 매우 유사한 것으로 나타났다. 이 화합물들의 격자상수, a와 c는 최소자승법을 이용하여 구하였다. 또한 XPS로 분석을 통하여 이들의 표면을 조사한 결과 금속 표면이 실온에서 공기와 접촉하였을 때 여러 구성성분 중에서 Mo(0)가 Mo(6+)로 산화되는 것을 확인하였는데, 아르곤이온으로 표면을 15분 정도 sputtering 하여 Mo(6+)층을 제거할 수 있었다. 합금의 구성성분 중, Mo, Ru, Rh 원소에서 내부 전자들의 결합에너지에는 커다란 변화가 없는 것으로 나타났다. 이들 화합물들의 자화율을 측정해 본 결과 2~300 K 범위에서 전형적인 Pauli-paramagnetic 행동을 보여주었다.

  • PDF

수식된 $[Ru(v-bpy)_3]^{2+}$ 고분자 피막전극을 이용한 U(VI)의 정량 (Quantitative Determination of $UO2^{2+}$ with Modified $[Ru(v-bpy)_3]^{2+}$ Polymer Film Electrode)

  • 차성극
    • 대한화학회지
    • /
    • 제44권1호
    • /
    • pp.17-23
    • /
    • 2000
  • 전기화학적으로 중합한 $[Ru(v-bpy)_3]^{2+}$의 다가 양이은성 고분자 피막전극을 $PF6^-/ClO_4^-$대이온의 비가 1:1 정도 되게 한 후에 우라늄과의 착물의 안정도상수가 각각 38.6과 17.5인 xylenoI orange와 diethyldithiocarbamate로 변성한 전극을 제작하였다. 이를 이용하여 용액중의 U(VI)을 정량할 수 있는 여러 회 사용이 가능한 전극을 제작하였다. 이 때에 분석용 신호를 얻기 위한 전극은 Pt/p-$[Ru(v-bpy)_3]^{2+}$, ligand, U(VI)이며 염화은 기준전극을 사용하였다. 벗김전압전류 과정에서는 전자전달이 지배적인 과정이었으며, 검정선은 $1.0{\times}10^{-3}{\sim}1.0{\times}10^{-7}$ M 범위에서 0.99의 좋은 상관관계와 5${\sim}$8%의 상대 표준편차를 나타냈다.

  • PDF