• Journal of the Korean Chemical Society
• /
• v.40 no.9
• /
• pp.607-614
• /
• 1996

The structural changes and dielectric properties of Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 compounds substituted by 0∼50 mol.% of Na+/La3+ mixed ions were investigated by X-ray diffraction method, IR and Raman spectroscopy, and LCR meter. The amount of perovskite phase increased with the increases of Na+/La3+ substituents and sintering temperatures. Although the superlattice lines due to 1:1 ordering were not detected by X-ray diffraction method, it was found, from the Raman spectroscopy and the increase of diffuseness coefficient, that the ordering behavior was related to the decrease of A site ion size. Dielectric properties in Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 were affected by the amount of perovskite phase, grain size, and density. The phase transitions were broadened and phase transition temperatures were lowered by the increase of Na+/La3+ ions.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.275-283
• /
• 2012

MCM-41(Mobil's Composition of Matter-41) and expanded graphite(EG) were investigated as potential adsorbents for heavy metal ions including Pb(II), Cu(II) and Ni(II) in various aqueous chemistries. MCM-41 showed shorter equilibrium times and higher adsorption capacities for all three heavy metal ions compared to expanded graphite. The adsorption of three heavy metal ions was significantly affected by the solution pH due to the competition with $H_{3}O^{+}$ at lower pH and precipitation at neutral or higher pH. Adsorptions of heavy metal ions onto MCM-41 and expanded graphite were successfully described with the pseudo-second-order model. During the competitive adsorption of three heavy metal ions, the selectivity of Pb(II) was highest and almost same selectivity was observed with Cu(II) and Ni(II) when MCM-41 was used as an adsorbent, while the expanded graphite exhibited the highest selectivity to Pb(II), followed by Ni(II) and Cu(II).

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.301-306
• /
• 2020

We investigated the individual biosorption removal of lead, copper, and nickel ions from aqueous solutions using Chara sp. algae powder in a batch mode. The impact of several parameters, such as initial concentration of the metal ions, contacting time, sorbent dose, and pH on the removal efficiency, was investigated. The maximum removal efficiency at optimum conditions was found to be 98% for Pb(II) at pH = 4, 90% for Cu(II) at pH = 5, and 80% for Ni(II) at pH = 5. The isotherm study was done under the optimum conditions for each metal by applying the experimental results onto the well-known Freundlich and Langmuir models. The results show that the Langmuir is better in describing the isotherm adsorption of Pb(II) and Ni(II), while the Freundlich is a better fit in the case of Cu(II). Similarly, a kinetic study was performed by using the pseudo-first and second-order equations. Our results show that the pseudo-second-order is better in representing the kinetic adsorption of the three metal ions.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1999

The adsorption and separation behaviors of transition metal ions using a merrifield resin bound 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane (NTOE) and 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE) were investigated in aqueous solution. The orders of adsorption degree(E) and distribution ratio(D) of transition metal ions were Cu(II)$t_R$) of metal ions were affected by adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of Ag(I) from mixed metal solution.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.163-171
• /
• 2002

The adsorption characteristics of Cd(II) and Pb(II) ions has been studied by using chitin as an adsorbent. The pure chitin was obtained from the extraction of red-crab shell dumped by fish factory. Adsorption kinetics of Cd(II) and Pb(II) ions on the chitin reached at the maximum adsorption within two minutes. Adsorbed amounts of heavy metals were pH 7.0>10.5>3.5 in the following order. Adsorption ratio by chitin was 21${\sim}$99% for Cd(II) ion and 24${\sim}$95% for Pb(II) ion. Recovery ratio of Cd(II) ion on the chitin was 22${\sim}$53%, and that of Pb(II) ion was 22${\sim}$73%. The adsorption behavior of these heavy metals was explained well by Freundlich adsorption isotherm.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.51-59
• /
• 1999

Chemical composition of atmospheric aerosols was measured at 4 sites in Pusan. All the samples were collected with a high volume air sampler from January to October 1996, to analyze major ions and heavy metals. Dominant ions of aerosols were S $O_4$$^{2-}$ in anion and N $a^{+}$ in cation. Sulfate, nitrate and ammonium ions in aerosols showed high enrichment factor to soil and seawater composition. The concentrations of heavy metals in aerosols was lowest at the site PI near the coast. The lowest concentrations of major ions and heavy metals mainly appeared in August, probably due to scavenging by frequent rains. Especially, the concentrations of total suspended particulate matter(TSP) and heavy metals in aerosols showed good correlations in Pusan. Based on crustal Al, enrichment factors for some metals(Zn, Cu, Pb, Cd) in aerosols were significantly greater than unity, and the order was Cd ＞ Pb ＞ Zn ＞ Cu. This evidence suggests that Cd and Pb are derived predominantly from non-crustal sources.s.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3313-3318
• /
• 2014

The reaction mechanism of Lead ions catalyzing complexation reactions between TIPP and metal ions was investigated by researching the kinetics of the formation of metalloporphyrins by UV/Vis-spectra, and verified by exploring the formation of metalloporphyrins catalyzed by acetic acid. Kinetics studies suggested that the fluctuations of reaction rate indicated the formation of metalloporphyrin was step-wise, including the pre-equilibrium step (the coordination of the pyrrolenine nitrogens to $Mn^+$) and the rate-controlling step (the deprotonation of the pyrrole proton). In the pre-equalization step, a sitting-atop (SAT) structure formed first with the complexation between larger radius of $Pb^{2+}$ and TIPP, changed the activation, then $Pb^{2+}$ left with the smaller radius of metal ions attacking from the back of the porphyrin ring center. In the rate-controlling step, two pyrrole protons dissociated to restore a stable structure. This was verified by adding acetic acid at different reaction times.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.564-567
• /
• 2004

FAs and BAs indicated different chemical compositions and physical properties. Leaching of Pb in FAl and Cu in FA2 were 33.2mg/L and 5.92mg/L, these were high concentration above 30 and 2 times respectively in compared to permit level. Leaching of Hg and Cr were about 1/2 of permit level. When diatom was complexly mixed with portland cement, the 28 days compressive strength of mortar with FA2 was similar with that of control mortar. Furtherfore, leaching of heavy metal ions like as Pb, Cu, Hg, Cr was highly reduced.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.141-145
• /
• 1999

The study was conducted for the efficient utilization of biomaterials such as Chestnut shell which was wasted tremendously as an agricultural by-products. This biomaterials were examined for their removal rate of heavy metal ions as adsorbents in wastewater by batch adsorption experiments. In this experiment, the heavy metal ions used were $\Cd^{2+},\;Fe^{2+},\;Cr^{6+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$. The range of time for the removal rates of heavy metal ions were observed about 10 min. The range of high pH for the removal rates of $\Cd^{2+},\;Fe^{2+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$ ere observed 7.0-9.0. The range of high pH for the removal rate of $Cr_{6+}$ was observed 2. In the case of raw chestnut shell, the removal rates of $\Fe^{2+},\;Mn^{2+},\;Cu^{2+}$ and $Pb^{2+}$ were above 70 percent. The removal rates of heavy metals in formaline pretreated chestnut shells except $Cd_{2+}$ were above 50 percent and in phosphorylating chestnut shells except $Cr_{6+}$ were above 60 percent. Chestnut shells pretreated by formaline and phosphorylating were not so good enough for improvement of removal rates with pH change in mixed heavy metal solution.

• Carbon letters
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2011

In the present study, the removal of Pb (II) ions on oxidized activated carbons (ACs) was investigated. ACs were derived from activation of indigenous cotton stalks waste with potassium hydroxide (KOH) in two-stage process. The KOH-ACs were subjected to liquid-phase oxidation with hot $HNO_3$ and one untreated sample was included for comparison. The obtained carbons were characterized by Fourier transform infrared (FTIR), slurry pH and $N_2$-adsorption at 77 K, respectively. Adsorption capacity of Pb (II) ions on the resultant carbons was determined by batch equilibrium experiments. The experimental results indicated that the oxidation with nitric acid was associated with a significant increase in mass of yield as well as a remarkable reduction in internal porosity as compared to the untreated carbon. The AC-800N revealed higher adsorption capacity than that of AC-800, although the former sample exhibited low surface area and micropore volume. It was observed that the adsorption capacity enhancement attributed to pore widening, the generation of oxygen functional groups and potassium containing compounds leading to cation-exchange on the carbon surface. These results show that the oxidized carbons represented prospective adsorbents for enhancing the removal of heavy metals from wastewater.