• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.295-304
• /
• 1995

Stabilization of the perovskite phase and sequence of reactions occuring during calcination were studied with solid solutions formed between Pb(Zn1/3Nb2/3)O3 and Pb(Fe1/2Nb1/2)O3. In the PZN-PFN composition of equal molar ratio, rhombohedral type pyrochlore phase (Pb2Nb2O7) and PbO-rich distorted cubic type pyrochlore phase (Pb3Nb2O8) were coexisted as intermediate phases at temperatures below 85$0^{\circ}C$, and these phases transformed to a stable cubic type pyrochlore phase, Pb3Nb4O13 solid solution and a perovskite solid solution at temperatures above 85$0^{\circ}C$. The major stable phase as increasing sintering temperatures was a perovskite phase in this binary system and prominent suppression of the pyrochlore phase was achieved by substituting Zn2+ with Fe3+ or by increasing sintering temperature. The composition containing 20mol% PZN possessed the best dielectric properties, and the dissipation factor was lower than 5% in all compositions.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.748-760
• /
• 1995

Pyroelectric properties, figure of merits, and the other properties of the Pb(Zn1/3Nb2/3)O3-Pb(Fe1/2Nb1/2)O3 system, as expected to have excellent pyroelectric properties in the operating temperature range of pyroelectric type infrared sensor, were investigated. In the Pb(Zn1/3Nb2/3)O3-Pb(Fe1/2Nb1/2)O3 system, suppression of the pyrochlore phase depended on sintering condition, as like sintering temperature, holding time, sintering atmosphere. The specimen, sintered by the same composition atmosphere powder at 105$0^{\circ}C$ for 1.5h, possessed the best physical property. It was found that the piezoelectric parameters were mainly depended on the amount of spontaneous polarization and then the 0.2PZN-0.8PFN showed the best pyro- and piezoelectric properties. In terms of the experimental method, two pyroelectric-testing methods, i.e. static and dynamic methods, had a same tendency. Also the result of pyroelectric testing by the static method indicated that the diffuse phase transitiion resulted in the temperature difference of phase transition between dielectric constant and pyroelectric coefficient.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.667-672
• /
• 1998

Columbite precursor 방법을 이용하여 제조한 Pb(Mg1/3Nb2/3)O3-PbTiO3 세라믹계의 초전특성을 $1000^{\circ}C$에서 $1250^{\circ}C$의 소결온도 범위에서 관찰하였다. Pb(Mg1/3Nb2/3)O3-PbTiO3 계는 전형적인 완화형 강유전특성을 나타내었다. $1250^{\circ}C$에서 2시간 소결한 $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ 세라믹의 경우, 높은 소결밀도와 향상된 초전특성을 얻을수 있었다. $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$세라믹은 항온장치를 이용할 경우 초전 센서로의 응용가능성을 나타내었다.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1443-1448
• /
• 1994

Pb(Mg1/3Nb2/3)O3-PbTiO3-BaTiO3 solid solution was formed by mixed-oxide method. The phase during formation was analysed by XRD and formation mechanism was investigated. While heat-treating Pb(Mg1/3Nb2/3)O3 composition, the first, Pb2Nb2O7 and Pb3Nb2O8 pyrochlore phases are formed, and finally Pb(Mg1/3Nb2/3)O3 perovskite phase with containing Pb3Nb4O13 pyrochlore phase is obtained at 80$0^{\circ}C$. When Pb(Mg1/3Nb2/3)O3 composition is modified with PbTiO3 which have strong ionic bonding and high tolerance factor, the amount of pyrochlore phase is decreased by increasing of stability in perovskite structure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.132-132
• /
• 1997

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1267-1275
• /
• 1996

Green sheet was prepared by tape casting in the composition of (1-x)Pb(Mg1/3Nb2/3)O3-PbTiO3 system using Pb(Mg1/3Nb2/3)O3 and PbTiO3 synthesized with PbO, Nb2O5 MgO and TiO2 The densest green sheet was obtained in the weight ratio 70:30 of powder to binder. Green sheet wasmultilayered in metal mould and formed into lamination at 7$0^{\circ}C$, 300kg/cm2 The lamination was sintered at 110$0^{\circ}C$ 2hr, Dielectric constant and Curie temperature of disc type sintered body was highered with increasing the amount of PbTiO3 and was in the range of 19000-21000, -7~45$^{\circ}C$ respectively. Green and sintered relative density of lamination was 61% and 95% respectively.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.123-128
• /
• 1998

Multilayer ceramic capacitors(MLCC) were prepared by laminating the layer of composition with dif-ferent Curie temperature to improve temperature coefficient in the Pb(Mg1/3Nb2/3)O3-PbTiO3 binary system. Green sheet was formed by tape casting using Pb(Mg1/3Nb2/3)O3-PbTiO3 and PbTiO3 synthesized with solid state reaction of PBO. Nb2O5 MgO and TiO2. Green sheet with electrode of 70Ag-30Pd was laminated under 300 kg/cm2 at 70$^{\circ}C$ and sintered at 1100$^{\circ}C$ for 2hr. Curie temperatues for MLCC with 10 layers of pure PMN and 0.9PMN-0.1PT were lowered to -22$^{\circ}C$ and 36$^{\circ}C$ respectively. MLCC with 7 layers of PMN and 3 layers of 0.9PMN-0.1PT showed nearly zero temperature coefficient of capacitance in the range of -20∼30$^{\circ}C$ and sum of dissipation factor of each layer.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.713-720
• /
• 1990

The effects of substituting Zn+2 for Ni+2 ion on dielectric and piezoelectric prooperties of Pb(Zn1/3Nb2/3)O3-Pb(Ni1/3Nb2/3)O3-PZT ceramics were investigated. With increasing Zn2+ contents the tetragonality was appreciably enhanced and the grain size decreased. Both Curie temperature and thermal stability were increased with increase in Zn2+ contents since the Zn+2 partial substition for Ni+2 could form solid solution in almost range of the composition investigated. Piezoelectric prooperties showed the maximum($\varepsilon$ T/$\varepsilon$0=5014, kp=0.56, d31=250$\times$10-12m/V) in 4.5Pb(Zn1//3Nb2/3)O3-40.5Pb(Ni1/3Nb2/3)O3-55PZT composition sintered at 125$0^{\circ}C$ and then decreased again due to the phase boundary movement for tetragonal phase of the solid solution of Zn2+ amount.

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.723-730
• /
• 1993

The mechanism of formation of perovskite phase and the dielectric properties of PZMN[Pb(Zn, Mg)1/3Nb2/3O3] ceramics were examined using two different types of the columbite precursors, (Mg, Zn)Nb2O6 (MZN) and MgNb2O6＋ZnNb2O6 (MN＋ZN). The formatin of perovskite phase in PbO＋MN＋ZN system is characterized by an initial rapid formation of Mg-rich perovskite phase, followed by a sluggish formation of Zn-rich perovskite phase. On the other hand, thepyrochlore/perovskite transformation in the PbO＋MZN system proceeded uniformly with a spatial homogeneity. The degree of diffuseness of the rhombohedral/cubic phase transitionis higher in the PbO＋MN＋ZN system than in the PbO＋MZN specimen, indicating a broadened compositional distributjion of the B-site catons (Nb+5, Zn+2, Mg+2) in the PbO＋MN＋ZN system.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.863-870
• /
• 2002

$Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Ta^{5+}$을 $Ta^{5+}$과 이온반경이 같고 원자량이 약 1/2배인 $Nb^{5+}$으로 치환한 $Pb{{Fe_{1/2}(Ta_(1-x)Nb_x)_{1/2}}O_3$ (x=0.0∼1.0) 고용체를 단일상으로 합성하여 그 유전특성 및 B자리 양이온 질서배열구조를 조사하였다. $Pb(Fe_{1/2}Ta_{1/2})O_3$는 유전완화현상 및 완만한 상전이가 뚜렷하게 관찰되는 전형적인 완화형 강유전특성을 보였지만, $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 유전완화현상은 감소하고 상전이는 급격해져 결국 $Pb(Fe_{1/2}Nb_{1/2})O_3$는 유전완화현상이 전혀 관찰되지 않는 정상 강유전특성을 보였다. Raman 분광법에 의해 $Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Fe^{3+}$과 $Ta^{5+}$은 XRD는 물론 TEM의 제한시야회절패턴으로도 검출하기 어려울 정도의 단거리영역에서 화학양론적으로 1:1 질서배열하고 있으며, $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 $Fe^{3+}$과 ($Ta^{5+}-Nb^{5+}$) 간의 질서배열은 약화되어 결국 $Pb(Fe_{1/2}Nb_{1/2})O_3$의 $Fe^{3+}$과 $Nb^{5+}$은 완전 무질서배열하고 있음이 밝혀졌다. $Pb(Fe_{1/2}Ta_{1/2})O_3$의 완화형 강유전특성은 B자리 양이온들이 XRD는 물론 TEM의 제한시야회절패턴으로도 검출하기 어려울 정도의 단거리영역에서 화학양론적 1:1 질서배열을 하고 있는 것과, 또 $Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 완화형 강유전특성이 감소되는 것은 이 질서배열이 약화되는 것과 그리고 $Pb(Fe_{1/2}Nb_{1/2})O_3$의 정상 강유전특성은 B자리 양이온들이 완전 무질서배열을 하고 있는 것과 연관지을 수 있었다.