• 제목/요약/키워드: $P_2O_5$

검색결과 7,235건 처리시간 0.04초

$K_2O$-CaO-$P_2O_5$계 유리의 Fe, Cu, Zn 첨가에 따른 용출 특성 (Dissolution Properties of $K_2O$-CaO-$P_2O_5$ Glasses With Fe, Cu, Zn)

  • 김기민;강원호
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2008년도 추계학술발표논문집
    • /
    • pp.459-462
    • /
    • 2008
  • 본 논문에서는 $10K_2O$-30CaO-$60P_2O_5$ mol%를 기본조성으로 하여 Fe, Cu, Zn의 미량성분을 첨가하여 유리를 제조하고 용출 특성을 평가 하였다. 제조된 유리는 미량성분의 첨가량에 따라 유리의 투명도가 변하는 것이 관찰되었다. 용출특성은 측정 4시간 뒤 pH값 증가되는 것으로 16시간 후 pH가 증가하는 것으로 관찰되었다. 여기서 pH의 증가는 염기성산화물이 용출되는 것으로, 감소는 $P_2O_5$구조인 망목형성구조가 붕괴되어지면서 산성이온이 용출되어지는 것으로 판단되어진다. ICP관찰시에는 함량이 증가하면서 K, Ca, P이온의 용출량이 감소되었고, Zn, Cu, Fe이온의 용출량이 증가하는 경향이 관찰되었다.

  • PDF

FHD법에 의한 $B_2O_3-P_2O_5-SiO_2$ 실리카막의 효과적인 $P_2O_5$ 도핑 (The Effective $P_2O_5$ Doping into $B_2O_3-P_2O_5-SiO_2$ Silica Layer Fabrication by Flame Hydrolysis Deposition)

  • 심재기;이윤학;성희경;최태구
    • 한국세라믹학회지
    • /
    • 제35권4호
    • /
    • pp.364-370
    • /
    • 1998
  • 광집적회로용 평면도파로를 구현하기 위한 $B_2O_3-P_2O_5-SiO_2$ 실리카 광도파막을 실리콘 기판위에 FDH(Flame Hydrolysis Depositon)법으로 제조하여 미립자의 미세구조, 실리카막의 굴절률과 조성을 고찰하였다. FHD법에서 도펀트(dopant)물질로, $B_1\;P_1\;Ge$ 등의 산화물이 사용되며, $B_1$ Ge 산화물의 경우 $SiO_2$와의 결합특성이 우수하여 비교적 도핑(doping)이 용이하지만 P의 경우 $P_2O_5$의 낮은 융점에 의한 증발 등으로 효과적인 도핑이 어렵다. 수직형 FHD 토치를 사용하고 화염온도, 기판온도, 토치와 기판간의 거리를 최적화하여 P 농도가 3.3 Wt%이상이고 고밀화 온도가 $1180^{\circ}C$ 이하인 양질의 실리카막을 얻었다. 실리카막의 굴절률은 $1.55\;\mu\textrm{m}$ 파장에서 $1.4480{\pm}1{\times}10^{-1}$로 측정되었으며, $22{\pm}1\;\mu\textrm{m}$의 두께를 보였다.

  • PDF

생체유리에서 유리조성과 반응용액에 따른 아파타이트 형성 (Apatite Formation Behavior on Bioactive Glasses with Glass Composition and Reaction Solution)

  • 이재희;이정웅;김철영
    • 한국세라믹학회지
    • /
    • 제37권11호
    • /
    • pp.1105-1113
    • /
    • 2000
  • Bioglass 조성 중 45S5 (46.1SiO$_2$.24.4$Na_2$O.26.9CaO.2.6P$_2$O$_{5}$ : 몰비)를 기본 조성으로 하여 46P4 (46.2SiO$_2$.49.5CaO.4.3P$_2$O$_{5}$ : 몰비), 46SF (46.1SiO$_2$24.4$Na_2$O.16.1CaO.2.6P$_2$O$_{5}$.10.8CaF : 몰비) 그리고 55SF (55.1SiO$_2$.9.2$Na_2$O.27.8CaO.3.4P$_2$O$_{5}$.4.5CaF : 몰비)를 제조하여 tris-완충용액 및 유사 생체용액(simulated body fluid)에서 반응시킨 후 생체활성유리의 표면에 생성되는 아파타이트 결정형에 관하여 연구하였다. 45S5 유리를 tris-완충용액에 반응시켰을 경우 6시간 반응시부터 수산화 아파타이트가 생성되었으나 유사 생체용액에 반응시켰을 경우에는 24시간까지도 수산화 아파타이트 결정이 생성되지 못하고 비정질 상태의 칼슘 인산염만 형성되었다. tris-완충용액에 각 조성의 유리를 200시간 반응시킨 경우 불소를 함유하지 않은 유리에서는 잎사귀 모양의 수산화 아파타이트가, 불소를 함유한 유리에서는 구상의 플루오르 아파타이트가 형성되었다. 그러나 유사 생체용액에 각 조성의 유리를 200시간 반응시켰을 경우 불소를 함유하지 않은 유리에서는 누에고치형의 수산화 아파타이트가 형성되었고 불소를 함유한 유리에서는 무정형의 칼슘 인산염이 생성되었다.

  • PDF

높은 반사율과 저유전율이 요구되는 PDP의 후면 유전체 층의 전기적 특성 (Electrical properties of the lower dielectrics layer of PDP required high reflectance and low dielectric constants)

  • 권순석;류장렬
    • 전자공학회논문지 IE
    • /
    • 제43권4호
    • /
    • pp.8-12
    • /
    • 2006
  • 본 논문에서는 $SiO_2-ZnO-B_2O_3$ 계 및 $P_2O_5$-ZnO-BaO 계의 반사율과 유전특성을 $TiO_2$의 양에 따라 조사하였다. 반사율은 $TiO_2$ 함량이 증가함에 따랴 감소하였다 여기서 $P_2O_5$-ZnO-BaO계는 $SiO_2-ZnO-B_2O_3$ 계보다 더 낮은 반사율을 나타내었으며, 유전상수는 $P_2O_5$-ZnO-BaO 계가 $SiO_2-ZnO-B_2O_3$ 계보다 높았다. 두 계 모두 유전상수는 $TiO_2$의 양에 따라 증가하는 특성을 보였다. 이 결과는 높은 반사율과 항복특성이 요구되는 PDP디스플레이의 후면 유전층에 적용할 수 있을 것으로 생각된다.

치관 보철용 CaO-MgO-$SiO_2-P_2O_5-TiO_2$계 글라스 세라믹의 합성과 경도 (Synthesis and Hardness of Glass Ceramics for Dental Crown Prosthetic Application in the system CaO-MgO-SiO2-P2O5-TiO2)

  • 정인성;김갑진;정호근;이종일
    • 대한치과기공학회지
    • /
    • 제21권1호
    • /
    • pp.5-14
    • /
    • 1999
  • Glass ceramics for dental crown prosthesis were prepared by crystallization of CaO-MgO-SiO2-$P_2O_5-TiO_2$ glasses. Their crystallization behaviors have been investigated as a function of heattreatment temperature, holding time and chemical composition in relation to mechinical properties. Crystallization peak temperatures were determined by differential thermal analysis(DTA). Crystalline phases and mircostructures of heat-treated sample were determined by the means of powder X-ray diffraction(XRD) and scanning electron microscopy(SEM). The final crystalline phase assemblages and the microstructures of the samples were found to be dependent on glass compositions, heattreatment temperature, and holding time. 1st crystallization peak temperature(TP), affected strongly by apatite, was found to be increased or decreased. From the experiment, the following results were obtained : 1. The crystallization peak temperature($T_P$) formed by apatite increased until adding up to 9wt% $TiO_2$ to base glass composition, then decreased above that. 2. Apatite($Ca_{10}P_6O_{25}$), whitlockite(${\beta}-3CaO-P_2O_5$), $\beta$-wollastonite($CaSiO_3$), magnesium tianate($MaTiO_3$) and diopside(CaO-MgO-$2SiO_2$) crystal phase were precipitated in MgO-CaO-$SiO_2-TiO_2-P_2O_5$ glass system containing 9wt% and 11wt% of $TiO_2$ 3. Vickers hardness of samples increased with increasing heat-treatment temperature and Vickers hardness of S415T9 samples heat-treated at 1075 was approxi-mately 813Kg $mm^{-2}$ as maximum value. 4. Vickers hardness of samples increased due to precipitation of apatite, whitlockite, $\beta$-wollastonite, magnesium titanate, and diopside crystal phases within glass matrix.

  • PDF

$CaO-P_2O_5$계 결정화유리로 된 생체세라믹스의 합성에 관한 연구 (Synthesis of Bioceramics Based on Glass-Ceramics of $CaO-P_2O_5$ System)

  • 김병호;박인용
    • 한국세라믹학회지
    • /
    • 제23권3호
    • /
    • pp.67-77
    • /
    • 1986
  • various properties and manufacturing conditions were investigated in order to synthesize the glass-ceramics of $CaO-P_2O_5$ system for bioceramics. Compositions of easy unidirectional crystallization were between 47.5 and 50, 0mol% CaO For the glass rods prepared by pulling them to about 3 times the original rod length unidirectional crystallization was easier than original glass rods. These samples were crystallized in the axial direction at 15${\mu}{\textrm}{m}$/min in an electric furnace with a temperature gradient of about 3$0^{\circ}C$/cm at 57$0^{\circ}C$. Bending strengths of surface and unidirectionally crystallized samples were investigated with various CaO/$P_2O_5$ molar ratios. The bending strengths of unidirectionally crystallized samples were larger than those of surface -crystallized samples and the value of 47.5CaO.52.5 $P_2O_5$ was 1650kg/$cm^2$. XRD patterns showed that major phase is $\beta$-Ca(PO3) with minor phase 2CaO.$P_2O_5$ Relative crystal-linity of surface-crystallized sample was inversely propertional to the bending strenth. SEM of fracture surface of unidirectionally crystallized samples revealed an unidirectionally aligned structures.

  • PDF

SnO-P2O5계 유리에서 P2O5를 B2O3로 치환시 구조와 물성에 미치는 영향 (Effects of Substituting B2O3 for P2O5 on the Structure and Properties of SnO-P2O5 Glass Systems)

  • 김동환;황차원;김남진;임상혁;구동건;김태희;차재민;류봉기
    • 한국세라믹학회지
    • /
    • 제48권1호
    • /
    • pp.63-68
    • /
    • 2011
  • The investigation is directed to lead free (Pb-free) frits that can be used for organic light emitting diode, plasma display screen devices and other sealing materials. $P_2O_5$-SnO system glasses have been prepared for Pb-free low temperature glass frit. Structure and properties of the glasses with the composition SnO-$xB_2O_3-(60-x)P_2O_5$ (x=0, 5, 10, 15, 20, 25, 30, 35, 40 mol%) were characterized by infrared spectra (IR), X-ray diffraction(XRD), Density, Molar volume, Thermo mechanical analysis(TMA) and weight loss after immersion test. Glass transition temperature($T_g$), dilatometric softening temperature($T_d$) and chemical durability increased, and coefficient of thermal expansion($\alpha$) decrease with the substitution of $B_2O_3$ for $P_2O_5$ in the range of 0~25 mol%.

인산시비량이 쇠무릎의 생육, 건물수량 및 인산회수율에 미치는 영향 (Effect of Phosphorous Fertilizer Rate on Growth, Dry Matter Yield, and Phosphate Recovery in Achyranthes japonica)

  • 강영길;고미라;강봉균;강시용;유장걸;류기중
    • 한국작물학회지
    • /
    • 제48권3호
    • /
    • pp.173-178
    • /
    • 2003
  • 제주도에서 쇠무릎을 생약(뿌리) 또는 ecdysteroid(뿌리+포과)를 생산하기 위하여 재배할 경우 적정 인산시비량을 구명하고자 질소시비량 2수준(90, 180kg/ha)과 인산시비량 5수준 (0, 100, 200, 300, 400kg/ha)에서 시험하였던 결과는 다음과 같다. 초장, 엽장, 엽폭, 경직경, 화서당 포과수, 주근장, 주근경은 인산시비량에 유의한 영향을 받지 않았는데, 주당 분지수와 화서수는 무인산구에 비하여 인산 100kg/ha 시비에 의하여 각각 18, 38%증가되었으나 인산 200kg 이상 시비구에서 감소되는 경향이었다. 주당 뿌리수는 인산 200kg에서 18.9개로 가장 많았다. 포과건물수량은 인산 100kg 시비구에서 2.92t/ha로 가장 많았고 200kg 이상 시비구에서 감소되었다. 건근수량은 무인산구에서 2.36t/ha이었던 것이 인산 100, 200kg 시비구에서 각각 3.55, 3.80t/ha 으로 유의성 있게 증가하였다가 300, 400kg 시비구에서는 3.14, 2.86 kg로 감수되었다. 지상부의 인산회수율은 인산 100kg 시비구에서 34.0%이었던 것이 400kg 시비구에서는 7.1%로 감소되었다.

Flux가 Lithium Ferrite의 미세구조 및 메모리코어 특성에 미치는 영향 (The Effects of Flux on the Microstructure and Memory Core Characteristics of Lithium Ferrites)

  • 임호빈
    • 한국세라믹학회지
    • /
    • 제16권1호
    • /
    • pp.26-30
    • /
    • 1979
  • The microstructures and memory core characteristics of substituted lithium ferrites with addition of $Bi_2O_3$, $V_2O_5$, $Nb_2O_3$, and $P_2O_5$ were investigated. The effects of composite flux on the sintering of the substituted lithium ferrites were also studied. The results show that the addition of $Bi_2O_3$, $V_2O_5$, and $Nb_2O_5$ enhances sintering whereas $Sb_2O_3$ and $P_2O_5$ inhibits it, and that the addition of $Nb_2O_5$ results in uniform grain size while the addition of $Bi_2O_3$ or $V_2O_5$ results in non-uniformity in grain size. When $P_2O_5$ was added with $V_2O_5$ or $Bi_2O_3$, however, it results in uniform grain size and improved memory core properties.

  • PDF

졸-겔법으로 제조된 Phosphosilicate 유리-요업체 분말로부터 $P_2O_5$ 휘발 반응 속도론 (The Kinetics of Volatilization of P2O5 From Sol-Gel Derved Phosphosilicate Glass-Ceramic Powder)

  • 김영식
    • 한국세라믹학회지
    • /
    • 제29권2호
    • /
    • pp.89-94
    • /
    • 1992
  • The kinetics of volatilization of phosphorous oxide from phosphosilicate glassceramic powders prepared by a sol-gel process were investigated at a given temperature. The rate of P2O5 vaporization increased with the P2O5 concentration in the phosphosilicate powder. Vaporization from the powder containing 46% P2O5 was analyzed using a kinetic model for diffusion limited evaporation. The diffusion through phosphosilicate glass in the surface of each particle in the temperature range 800~85$0^{\circ}C$ are presented.

  • PDF