• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.271-277
• /
• 1998

1. Why Wind Power\ulcorner Advantages of Wind Energy : free cost, non-pollutant, free waste large unit is possible Disadvantages : intermittent of energy density limited sites Unit Capacity of various Power Plant Solar PP : 10 - 500㎾ Wind PP : 200 - 2000 ㎾ Nuclear PP 700 - 1000 MW Installation Cost of Power Plants Nuclear PP : $ 2,500/㎾ Solar PP : $ 6,000/㎾ Wind PP : $ 1.000 /kw.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.138-145
• /
• 1998

Synergistic effect and characteristics of coliquefaction with Alaskan subbituminous coal and polypropylene (PP) were investigated in a tubing-bomb reactor. Coliquefaction results showed considerable synergistic effect on conversions for various coal/PP compositions and tetralin addition. Therefore, coliquefactions conversions at 430$^{\circ}$C and 450$^{\circ}$C with (coal 2 g+PP 2g) and 4 ml tetralin appeared 20.0 and 11.6 per cent higher respectively compared to the conversion of (coal+tetralin) and (PP+tetralin) liquefactions. According to gas chromatographic analyses, hydrogen was not needed during PP liquefactions. On the other hand, 0.70~0.83 part of tetralin per part of coal was converted into naphthalene by donoring hydrogen to free radicals during liquefaction. Also, extraction results by decalin proved that synergistic effect of coliquefaction were mainly due to PP decomposition catalysed be coal.

• Culinary science and hospitality research
• /
• v.16 no.1
• /
• pp.127-136
• /
• 2010

This study is to analyze the sensory and mechanical characteristics, moisture content and color values of purple sweet-potato powder sulgidduk prepared with various concentrations of purple sweet-potato powder; 0%(PP0 group), 1%(PP1 group), 2%(PP2 group), 3%(PP3 group), and 4%(PP4 group). As a result of analyzing the texture, sulgidduk with more purple sweet-potato powder added and that used adhesiveness, springiness, cohesiveness, gumminess and chewiness of sulgidduk decreased but hardness was not significantly different by increasing the amount of Purple Sweet-Potato powder. The moisture content of purple sweet-potato powder sulgidduk ranged from 37~39%. Hunter color L-value of sulgidduk decreased and a, b-value increased significantly by increasing the amount of purple sweet-potato powder. The results of the study support the benefits of purple sweet-potato powder supplementation in sulgidduk in the aspects of taste and functionality. Above results indicated that sulgidduk added 3% purple sweet-potato powder(PP3) showed the best quality through the sensory and texture analysis.

• Membrane Journal
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2000

The artificial lung is a device used to replace the function of the lungs. The major function of the lung is to remove carbon dioxide from the venous blood and replace it with oxygen, or arterialize the blood. And the function of the artificial lung is to provide an adequate amount of oxygenated blood to all the tissues of body during the open heart surgery. Extracorporeal life support(ECLS or ECMO) is standard treatment for severe respiratory failure but poses many contributions to future lung transplantation. Artificial Lung or membrane oxygenators available today, based on microporous polypropylene fibers, are associated with two major problems. They require systemic anticoagulation of the patient and they allow serum leakage across the membrane from the blood side to the gas side during long-term use. We obtained newly fabricated polypropylene(PP)/polydimethylsiloxane(PDMS) membranes which combined PP membrane, a microporous support layer with PDMS, and we had investiaged a technique for minimizing serum lekage of polypropylene(PP) membrane. The gas permeability of each PP/PDMS membrane was almost constant before and after the whole blood test by Lee-White method, while that of PP membrane was significantly reduced. Therefore the PP/PDMS membrane could be prevented serum leakage of PP membrane. In addition, the gas permeability of $CO_2$ in PP/PDMS membrane was 11.5 times higher as compared with that of $O_2$.

• The Journal of Pediatrics of Korean Medicine
• /
• v.14 no.2
• /
• pp.33-46
• /
• 2000

It has long been known that Jahage(紫河車) extracts of Placenta hominis are effective for immunological and vascular diseases in human body and thus, was used a major constituent of traditional oriental medicines. From full-term human placenta, we have purified a new type anticoagulant protein, PP27, using different chromatographic techniques of a phenyl TSK gel 650M column, DEAE, HA and Mono-Q columns. PP27 showed single band on SDS-PAGE with a molecular mass (Mr) of 27 kDa under denaturing conditions and a calibrated Sepharose 4B column chromatography indicated a molecular mass of 23 kDa, indicating that the value is similar to those of other PP4 enzyme reported to date. Isoelectric point of PP27 was p15.2. The protein was found to inhibit the coagulation time in a concentration-dependent manner. PP27 was acted as a vascular anticoagulant of annexin type, inhibits the blood clotting process by binding of the essential lipids in a reaction which is dependent on $Ca2^+$ ions. In the presence of $Ca2^+$ ions, PP27 combines with platelet membranes neutralizing their procoagulant effect. Coagulation triggered by the addition of thromboplastin/ lipid- mixtures is extinguished by PP27.

• Biomolecules & Therapeutics
• /
• v.20 no.4
• /
• pp.393-398
• /
• 2012

Recently, we reported that defective autophagy may contribute to the inhibition of the growth in response to PP2 (4-amino-5-(4-chlorophenyl)-7-(t-butyl)pyrazolo[3,4-d]pyrimidine), a selective SFK inhibitor, in multidrug-resistant v-Ha-ras-transformed NIH 3T3 cells (Ras-NIH 3T3/Mdr). In this study, we demonstrated that PP2 induces LC3 conversion via a mechanism that is uncoupled from autophagy and increases apoptosis in Ras-NIH 3T3/Mdr cells. PP2 preferentially induced autophagy in Ras-NIH 3T3 cells rather than in Ras-NIH 3T3/Mdr cells as determined by LC3-I to LC3-II conversion and GFP-LC3 fluorescence microscopy. Beclin 1 knockdown experiments showed that, regardless of drug resistance, PP2 induces autophagy via a Beclin 1-dependent mechanism. PP2 induced a conformational change in Beclin 1, resulting in the enhancement of the pro-autophagic activity of Beclin 1, in Ras-NIH 3T3 cells. Further, PI3K inhibition induced by wortmannin caused a significant increase in apoptosis in Ras-NIH 3T3 cells, as demonstrated by flow cytometric analysis of Annexin V staining, implying that autophagy inhibition through PI3K increases apoptosis in response to PP2 in Ras-NIH 3T3 cells. However, despite the fact that wortmannin abrogates PP2-induced GFP-LC3 punctae formation, some LC3 conversion remains in Ras-NIH 3T3/Mdr cells, suggesting that LC3 conversion may occur in an autophagy-independent manner. Taken together, these results suggest that PP2 induces LC3 conversion independent of PI3K, concomitant with the uncoupling of LC3 conversion from autophagy, in multidrug-resistant cells.

• BMB Reports
• /
• v.28 no.4
• /
• pp.331-335
• /
• 1995

Simian virus 40 (SV40) small-t antigen (small-t) has been known to regulate the activity of a cellular enzyme, protein phosphatase 2A (PP2A), composed of A. B, and C subunits, via binding to the A subunit In the study presented here, the stoichiometry of the binding of small-t to PP2A was determined to be 1: 1. It was also shown that small-t binds to the AC form of PP2A with a higher apparent affinity than it binds to the free A subunit. We also characterized the interaction of PP2A with wild-type and various mutant small-ts. A single-point mutant (Val134Met) and a double-point mutant (Trp147Gly;Leu152 Pro) of small-t exhibited 3-fold and 5-fold lower potencies in inhibiting PP2A activity. respectively. This suggests that the region around amino acids between 134 and 152 of small-t might be important in regulating the enzyme activity of PP2A.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.428-432
• /
• 1997

The dephosphorylation specificity of protein phosphatase 2A (PP2A), calcineurin (PP2B) and protein phosphatase 2C (PP2C) were studied in vitro using myelin basic protein (MBP) as a model substrate which was fully phosphorylated at multiple sites by protein kinase C (PKC) or cyclic AMP-dependent protein kinase (PKA). In order to determine the site specificity of phosphates in myelin basic protein, the protein was digested with trypsin and the radioactive phosphopeptide fragments were isolated by high performance liquid chromatography (HPLC) on reversed-phase column. Subsequent analysis and/or sequential manual Edman degradation of the purified phosphopeptides revealed that Thr-65 and Ser-115 were most extensively phophorylated by PKA and Ser-55 by PKC. For the dephosphorylation kinetics, the phosphorylated MBP was treated with calcineurin or PP2C with various time intervals and the reaction was terminated by direct tryptic digest. Both Thr-65 and Ser-115 residues were dephosphorylated more rapidly than any other ones by phosphatases. However it can be differentiated further by first-order kinetics that the PP2B dephosphorylated both Thr-65 and Ser-115 with almost same manner, whereas PP2C dephosphorylated somewhat preferentially the Ser-115.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4039-4045
• /
• 2014

The crystallization behavior of irradiated polypropylene (PP) and the blend is an important parameter for polymer processing. Blends of PP/low density polyethylene (LDPE) with different LDPE contents were prepared by melt mixing in a twin screw extruder. The effect of the LDPE content on the irradiation effectiveness of the PP/LDPE blend with trimethylolpropane-trimetacrylate (TMPTMA) as a crosslinking co-agent was investigated in conjunction with the LDPE loading in the blend. The non-isothermal crystallization and crystal structure were measured by DSC, X-ray diffraction (XRD), and polarized optical microscopy (POM). A decrease in the melting temperature of PP was observed due to irradiation, which may be due to the PP chain scissioning effect of irradiation. The Ozawa component n represents a rod shaped, disc shaped and sphere-shaped geometry of the crystal if the value corresponds to 2, 3 and 4, respectively. Based on Ozawa analysis, the values of n were 3.8 and 2.3 for the pure PP and PP blends with 30 wt% LDPE, respectively. The fact that the crystal geometry of PP changed from spherical to disc and rod shaped was confirmed by Ozawa analysis and POM. The ${\beta}$ form XRD peak of the PP/LDPE blend at $16.1^{\circ}$ disappeared after irradiation due to the crosslinking reaction.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.320-325
• /
• 2015

Flow mark is a sort of surface defect on the composite that can arise during the filling stage of the injection molding process. The purpose of this study is to clarify a mechanism of the flow mark which appears on the surface of injection molded Polypropylene (PP) through the characterization of the surface structure. The materials used in this report are PP/rubber and PP/talc compounding, which are widely used in automobile part. The flow mark shows two different constitutions, such as a luster part and a cloud part on the surface of the injection molded PP. We have investigated the surface structure of PP/rubber and PP/talc composites by using scanning electron microscope (SEM), energy dispersive x-ray spectroscopy (EDAX) and optical microscopy (OM). As a result, the cloud part contains higher contents of the rubber and talc compare to the luster part.