• 분석과학
• /
• 제24권4호
• /
• pp.275-281
• /
• 2011

세제 제조시설 폐수의 유기물을 틀로 하여 $Al(OH)_3$과 $H_3PO_4$의 반응으로 $AlPO_4$-계 물질을 합성하였다. 소성된 $AlPO_4$-계 물질을 APTMS, 석신산 무수물과 반응시켜 표면을 카르복실기로 바꾸었다. 분말 XRD 결과, 특징적인 $AlPO_4$-계 물질의 패턴을 얻었으며, 물질의 형태는 SEM으로 조사하였고, 작용기는 FT-IR 분석으로 확인하였다. 증류수에 분산시킨 고체의 표면 전위 측정 결과, $AlPO_4-NH_2$는 양의 표면 전하를 갖는 반면, $AlPO_4$-COOH는 음의 표면 전하를 갖는 것으로 나타났다. 합성된 $AlPO_4$-계 물질을 이용하여 수용액에서 유해 중금속의 제거 실험을 수행하였다. 납 이온은 표면에 존재하는 카르복실기와 착물을 형성하며 물질에 흡착되었고, 흡착 분배계수는 91.1 mL/g이었다. 결론적으로 본 연구에서 고찰한 $AlPO_4$-계 물질은 수환경에서 유해 중금속 이온의 제거에 활용될 수 있을 것이다.

• 한국미생물·생명공학회지
• /
• 제5권3호
• /
• pp.153-158
• /
• 1977

Rhizopus japonicus S-62에 의한 acid protease의 생산조건 및 효소의 내열성을 검사하여 다음과 같은 결과를 얻었다. 1) 산성 protease의 생산에 있어 wheat bran medium에 관한 sucrose, yeast, ammonium chloride, sodium phosphate monobasic의 최적 첨가 농도는 각각 0.5%, 2.0%, 0.4%이었다. 2) 내열제로서KH$_2$PO$_4$와 NaH$_2$PO$_4$는 가장 효과적이었다. 3) 효소액에 KH$_2$PO$_4$와 NaH$_2$PO$_4$를 각각 2%씩 첨가하고 5$0^{\circ}C$에서 10분간 가열처리하였을 때 잔존청성은 다 같이 100%를 나타내었다. 4. 55$^{\circ}C$이상에서는 KH$_2$PO$_4$와 NaH$_2$PO$_4$의 과열변과는 거의 없었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1495-1498
• /
• 2005

Due to an efficient red emission, $Eu^{+3}$ ions have doped in various host materials. Eu-doped $LaPO_4/LaPO_4$ core/shell nanophosphor which emits red light in visible range, was synthesized by using a solution system. The mean size of the nanoparticle observed by TEM was about 7-8 nm. In this core/shell system, the thickness of $LaPO_4$ shell was optimized on the basis of relative PL emission intensity. In addition, the luminescent properties of $LaPO_4:Eu/LaPO_4$ core/shell particle have been compared with Eu-doped $LaPO_4$ bulk particle and nanoparticle.

• 대한환경공학회지
• /
• 제36권8호
• /
• pp.554-560
• /
• 2014

해양오염퇴적물 정화를 위한 몬모릴로나이트의 피복소재 적용성 평가를 위하여 $PO{_4}{^{3-}}$ 흡착특성을 알아보고자 동적흡착, 평형흡착, pH, 흡착제 주입량, 이온경쟁, 타 흡착제 복합사용 그리고 해수에서의 흡착특성을 살펴보았다. 동적흡착실험 결과 50 mg/L의 농도에서는 1시간대에 흡착평형을 나타내었고, 300 mg/L의 농도에서는 3시간대 흡착평형을 나타내었다. Freundlich 모델과 Langmuir 모델을 적용한 결과 다층흡착을 가정한 Freundlich 모델이 $PO{_4}{^{3-}}$의 평형 흡착에 더 잘 부합하였고, $PO{_4}{^{3-}}$의 흡착은 pH가 낮을 때 높은 흡착경향을 나타내었다. 이는 높은 pH에서는 OH-가 경쟁관계를 형성함으로 판단된다. 이온 경쟁관계 실험 결과 질산, 황산, 중탄산 모두 몬모릴로나이트의 $PO{_4}{^{3-}}$ 흡착에 영향이 미비한 것으로 나타났다. 몬모릴로나이트는 적니와 제강슬래그를 혼합하여 사용하는 것보다 단일 사용하였을 때 $PO{_4}{^{3-}}$ 제거에 더 효과적이었다. 해수에서의 $PO{_4}{^{3-}}$ 흡착특성을 살펴본 결과 담수에서의 흡착량 보다 높은 결과를 나타내었고 이는 해수 내 존재하는 칼슘이온 등의 결과로 판단된다. $PO{_4}{^{3-}}$ 용출 수조실험결과 몬모릴로나이트 피복 수조는 실험 14일까지 $PO{_4}{^{3-}}$이 측정되지 않았다. 몬모릴로나이트는 수용액중 $PO{_4}{^{3-}}$ 흡착 제거에 효과적인 피복소재로 판단된다.

• 전기화학회지
• /
• 제8권4호
• /
• pp.168-171
• /
• 2005

The electrochemical properties of $LiFePO_4$ as a cathode for Li-ion batteries were improved by incorporating conductive carbon into the $LiFePO_4$. X-ray diffraction analysis and SEM observations revealed that the carbon-coated $LiFePO_4$ consisted of fine single crystalline particles, which were smaller than the bare $LiFePO_4$. The electrochemical performance of the carbon-coated $LiFePO_4$ was tested under various conditions. The carbon-coated $LiFePO_4$ showed much better performance in terms of the discharge capacity and cycling stability than the bare $LiFePO_4$. The improved electrochemical performances were found to be attributed to the reduced particle size and enhanced electrical conductivity of the $LiFePO_4$ by the carbon.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.587-591
• /
• 2011

The effect of the precipitator (NaOH, $NH_4OH$) and the amount of the precipitator (150, 200, 250, 300 ml) on the formation of $Fe_3(PO_4)_2$, which is the precursor used for cathode material $LiFePO_4$ in Li-ion rechargeable batteries was investigated by the co-precipitation method. A pure precursor of olivine $LiFePO_4$ was successfully prepared with coprecipitation from an aqueous solution containing trivalent iron ions. The acid solution was prepared by mixing 150 ml $FeSO_4$(1M) and 100 ml $H_3PO_4$(1M). The concentration of the NaOH and $NH_4OH$ solution was 1 M. The reaction temperature (25$^{\circ}C$) and reaction time (30 min) were fixed. Nitrogen gas (500 ml/min) was flowed during the reaction to prevent oxidation of $Fe^{2+}$. Single phase $Fe_3(PO_4)_2$ was formed when 150, 200, 250 and 300 ml NaOH solutions were added and 150, 200 ml $NH_4OH$ solutions were added. However, $Fe_3(PO_4)_2$ and $NH_4FePO_4$ were formed when 250 and 300 ml $NH_4OH$ was added. The morphology of the $Fe_3(PO_4)_2$ changed according to the pH. Plate-like lenticular shaped $Fe_3(PO_4)_2$ formed in the acidic solution below pH 5 and plate-like rhombus shaped $Fe_3(PO_4)_2$ formed around pH 9. For the $NH_4OH$, the pH value after 30 min reaction was higher with the same amount of additions of NaOH and $NH_4OH$. It is believed that the formation mechanism of $Fe_3(PO_4)_2$ is quite different between NaOH and $NH_4OH$. Further investigation on this mechanism is needed. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and the pH value was measured by pH-Meter.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1120-1128
• /
• 2015

We propose a pseudo optical N-level pulse-amplitude modulation (PO PAM-N) signal using a few externally-modulated lasers (EMLs) operating at different wavelengths, which is suitable for upgrading the transmission speed over an optical link of < 10 km single-mode fiber with low-cost components. To compare a PO PAM-N signal with that of a standard optical PAM-N signal, we perform experiments for evaluating the performance of a 51.56-Gb/s PO PAM-4 signal and standard 51.56-Gb/s optical PAM-4 signal. The receiver sensitivity (at $BER=10^{-5}$) of the PO PAM-4 signal is 1.5 dB better than the receiver sensitivity of a standard optical PAM-4 signal. We also investigate the feasibility of PO PAM-N (N = 4, 8, and 16) signals operating at 103.12 Gb/s, considering relative intensity noise, timing jitter, extinction ratio (ER) of EMLs, and dispersion. From the results, a PO PAM-8 signal performs better than PO PAM-4 and PO PAM-16 signals at 103.12 Gb/s. Finally, we suggest a timing control method to suppress the effect of dispersion in a PO PAM-N signal. We show that the tolerance to dispersion of a 103.12-Gb/s PO PAM-8 signal can be improved to ${\pm}40ps/nm$ by applying a proposed scheme.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.761-766
• /
• 2002

Fine $LaPO_4$:Tb phosphor particles with spherical shape were prepared by spray pyrolysis. The influence of the precursor type of phosphorous such as ($NH_4$)$_2$$HPO_4$, $NH_4$$H_2$$PO_4$, ($NH_4$)$_3$$PO_4$ and $H_3$$PO_4$ on the morphology and brightness of particles was investigated. As-prepared particles by spray pyrolysis had spherical shape when ($NH_4$)$_2$ $HPO_4$ and $NH_4$$H_2$$PO_4$ were used as the precursor of phosphorous. The precursor type of phosphorous affected the photoluminescence intensity of $LaPO_4$:Tb phosphor particles, but not significant. With changing the content of activator(Tb) and excess of phosphorous, the optimal composition giving the highest photoluminescence intensity was found. The spherical morphology of prepared $LaPO_4$:Tb particles was completely maintained even after the posttreatment up to $1050^{\circ}C$. When the posttreatment temperature was over $1100^{\circ}C$, the particles did not have the spherical shape anymore. However, the highest photoluminescence intensity of prepared $LaPO_4$:Tb particles was obtained at $1050^{\circ}C$. The photoluminescence characteristics of prepared $_LaPO4$:Tb under the vacuum ultraviolet(VUV) illumination was comparable with that of the commercial $Zn_2$$V_4$:Mn and (La,Ce)PO$_4$:Tb phosphor particles. At the optimal condition, the decay time of prepared spherical $LaPO_4$:Tb phosphor particles was about 6.8ms.

• 한국결정성장학회지
• /
• 제18권6호
• /
• pp.248-252
• /
• 2008

전기전도성이 우수하면서 입자 크기가 작은 $LiFePO_4$ 분말을 얻기 위해서, 이종원소(Cr+B 또는 Cr+Al) 도핑이 $LiFePO_4$의 전기전도도에 미치는 영향과 열처리 조건이 입자 크기에 미치는 영향에 대해서 조사하였다. 조성이 $LiFe_{0.965}Cr_{0.03}B_{0.005}PO_4$ and $LiFe_{0.065}Cr_{0.03}Al_{0.005}PO_4$인 두 종류의 분말을 기계화학적 밀링법으로 혼합 후 $675{\sim}759^{\circ}C$에서 $5{\sim}10$시간 열처리하여 합성하였다. 이종원소 도핑은 입자성장을 촉진하였고 전기전도도를 높이는 효과가 있었다. $LiFe_{0.065}Cr_{0.03}Al_{0.005}PO_4$의 전기전도도는 $1{\times}10^{-8}S/cm$로 도핑하지 않은 것의 $5{\times}10^{-10}S/cm$보다 높았다.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.227-231
• /
• 1999

This study was conducted to investigate the removal characteristics of $PO_4^{3-}-P$ contained in livestock wastewater using waste concrete. With small particle size, increased dosage and temperature of water, $PO_4^{3-}-P$ was well removed by waste concrete.$PO_4^{3-}-P$ was removed by adsorption reaction in low pH of the primary phase, but the crystallization reaction predominated for increasing pH with passed time. As a result of adapting the adsorption isotherm equation, $PO_4^{3-}-P$ removal was more affected by the crystallization reaction than the adsorption reaction. In the SEM micrograph, there was no evident change on the waste concreter surface. Particle size was plate-phase before reaction but appeared a dense form to progress in the crystallization reaction.