• Journal of Surface Science and Engineering
• /
• v.23 no.2
• /
• pp.24-29
• /
• 1990

The TiN filmms were deposited on the stainless steel substrates by BARE techinique in order to investigate the effects of process parameters such as source-to-substate distance (15-35cm), N2 pressure(4$\times$10-10 -1$\times$10-3mb)and bias voltage(O-2000V), on the deposition rate, the concentration ratio [N/Ti] and the surface color of the films. The deposition rate was deduced from the weight measurement, the [N/ti] ratio by ESCA. The deposition rate decreased with a relationship of=40.2/D2 where D was source-to-substrate distance. The effect of the bias voltage and the N2pressure on the deposition rate, however, appeared negligble. The [N/Ti] ratio was in the narrow range of 0.7 tp 0.8 It increased slightly with the N2 partial pressure and deceased with the source-to-substrate distance. It was confired by ESCA that a significant amount of oxygen and carbon was contaminated after deposition in the top surface of TiN films. The surface color of TiN film was changed from light gold yellow to reddish gold yellow with increasing [N/Ti] ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.378-382
• /
• 1999

저 전압용 형광체는 최근에 활발히 연구가 진행되고 있으며 가장 대표적인 형광체가 ZnO Zn 녹색 형광체이다. ZnO : Zn 형광체는 자체발광형 형광체로써 ZnO을 환원분위기 하에서 열처리를 함으로써 얻을 수 있다. 본 연구에서는 자발착화 연소반응법(Glycine Nitrate Process)을 이용하여 ZnO : Zn 분말을 합성하고 형광특성 및 분말특성을 알아보았다. 출발물질로는 Zn Nitrate와 Glycine을 이용하였고 자발연소 반웅이 발생하는데 적절한 글리신의 양을 확인하기 위해서 글리신과 양이온의 비를 변화시키며 ZnO를 합성하였다. 그리고 Zn Excess가 생겨난 앙과 그에 따른 형광특성을 관찰하기 위해 $N_2$ 분위기 에서 각기 50$0^{\circ}C$, 75$0^{\circ}C$, 95$0^{\circ}C$의 온도에서 열처리를 행하였다. 제조된 ZnO 분말의 입자형태와 결정상 태는 SEM과 XRD를 이용하여 분석하였고 TG-DTA를 측정하여 열처리온도에 따른 질량감소(Zn excess)를 관찰하였다. 또 Particle size analyzer로 분말의 크기를 알아보았고 형광체로써의 발광특성을 살펴보기 위해 PL을 이용하여 발광피크를 관찰하였다.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.300-304
• /
• 1999

To tap the feasibility of exploiting the 2$^{nd}$ phases as flux-pinning centers in the (Bi,Pb)$_2Sr_2Ca_2CuO_{10}$ superconductor, the size and the distribution of the precipitates have been controlled by changing reaction temperature and time, oxygen partial pressure Po$_2$ and annealing condition. Various annealing heat treatments were also conducted on the as-received 61 filament Bi-2223 tapes with Bi$_{1.8}Pb_{0.4}Sr_2Ca_{2.2}Cu_3O_8$ starting composition and annealed specimen were analyzed with XRD, SEM, EDS and TEM.. The grain size of (Ca,Sr)$_2$(BiPb)O$_4$ or Bi$_{0.5}Pb_3Sr_2Ca_2CuO_{\delta}$ was controllable by optimizing the heat treatment condition and critical current density (J$_c$) showed dependence on the size of the 2$^{nd}$ phases.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.5
• /
• pp.717-724
• /
• 2003

A newly isolated Citrobacter sp. Y19 catalyzes the CO-dependent $H_2$ production (biological water-gas shift reaction) by the actions of CO dehydrogenase (CODH) and hydrogenase. Y 19 requires $O_2$ for fast growth, but its $H_2$ production activity is significantly inhibited by $O_2$. In the present study, the effect of $O_2$ on the activities of CODH ard hydrogenase was investigated quantitatively in both whole cells and broken cells, based on CO-dependent or methyl viologen (MV)-dependent $H_2$ production in addition to CO-dependent MV reduction. In crude cell extracts, CODH activity was mostly found in the soluble fraction. Inactivation of CODH and hydrogenase activities by $O_2$ followed the first-order decay kinetics, and the dependence of the rate constants on $O_2$ partial pressure could be expressed by the Michaelis-Menten equation. In whole cells, the maximum deactivation rate constants ($k_{d,max}$ of hydrogenase and CODH were quite similar: $0.07{\pm}0.03 min^{-1}\;and\;0.10{\pm}0.04 min^{-1}$, respectively. However, the first-order rate constant ($k_{d,max}/K_s$) of CODH ($0.25\;min^{-1}\;atm^{-1}$) at low $O_2$ partial pressures was about 3-fold higher than that of the hydrogenase, since the half-saturation constant ($K_s$) of CODH was about half of that of hydrogenase. In broken cells, both enzymes became significantly more sensitive to $O_2$ compared to the unbroken cells, while $k_{d,max}/K_s$ increased 37-fold for hydrogenase and 6.7-fold for CODH. When whole cells were incubated under anaerobic conditions after being exposed to air for 1 h, hydrogenase activity was recovered more than 90% in 2 h suggesting that the deactivation of hydrogenase by $O_2$ was reversible. On the contrary, CODH activity was not recovered once deactivated by $O_2$ and the only way to recover the activity was to synthesize new CODH. This study indicates that $O_2$ sensitivity of $H_2$ production activity of Citrobacter sp. Y19 is an important drawback as in other $H_2-producing$ bactria.

• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.114-120
• /
• 1984

The reversible oxygenation of a solid stae polymeric cobalt(II) porphyrin complex, PVP-CoTPP was studied at 0, -24 and $-78^{\circ}C$. When PVP-CoTPP was contacted with $O_2 $at$-78^{\circ}C$ the oxygen uptake increased with oxygen partial pressure. At about 700mmHg $O_2$, the amount of oxygen taken up corresponded approximately one oxygen molecule to one Co(II) complex. The amount of $O_2$ taken up by PVP-CoTPP decreased with increasing temperature. When $16O_2$ was admitted to the Co(II) complex a EPR signal corresponding to $O_2^-$ increased with a decrease in Co(II) signal. The results suggest that an electron is transfered from Co(II) in PVP-CoTPP to oxygen forming a $Co(III)-O_2^-$ complex where $O_2^- $is superoxide type.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1520-1522
• /
• 1999

저 전압용 형광체는 최근에 활발히 연구가 진행되고 있으며 가장 대표적인 형광체가 ZnO : Zn 녹색 형광체이다. ZnO : Zn 형광체는 자체발광형 형광체로써 ZnO을 환원분위기 하에서 열처리를 함으로써 얻을 수 있다. 본 연구에서는 자발착화 연소반응법(Glycine Nitrate Process)을 이용하여 ZnO : Zn 분말을 합성하고 형광특성 및 분말특성을 알아보았다. 출발물질로는 Zn Nitrate와 Glycine을 이용하였고 자발연소 반응이 발생하는데 적절한 글리신의 양을 확인하기 위해서 글리신과 양이온의 비를 변화시키며 ZnO를 합성하였다. 그리고 Zn Excess가 생겨난 양과 그에 따른 형광특성을 관찰하기 위해 $N_2$ 분위기에서 각기 $500^{\circ}C,\;750^{\circ}C,\;950^{\circ}C$의 온도에서 열처리를 행하였다. 제조된 ZnO 분말의 입자형태와 결정상태는 SEM과 XRD를 이용하여 분석하였고 TG-DTA를 측정하여 열처리 온도에 따른 질량감소(ZR excess)를 관찰하였다. 또 Particle size analyzer로 분말의 크기를 알아보았고 형광체로써의 발광특성을 살펴보기 위해 PL을 이용하여 발광피크를 관찰하였다.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.329-333
• /
• 2011

To develop wide-band noise absorbers with a special design for low-frequency performance, this study proposes a tin oxide (Sn-O) thin films as the noise absorbing materials in a microstrip line. Sn-O thin films were deposited on polyimide film substrates by reactive sputtering of the Sn target under flowing $O_{2}$ gas, exhibiting a wide variation of surface resistance (in the range of $10^{0}-10^{5}{\Omega}$) depending on the oxygen partial pressure during deposition. The microstrip line with characteristic impedance of $50\Omega$ was used for the measurement of noise absorption by the Sn-O films. The reflection parameter $(S_{11})$ increased with a decrease of surface resistance due to an impedance mismatch at the boundary between the film and the microstrip line. Meanwhile, the transmission parameter $(S_{21})$ diminished with a decrease of surface resistance resulting from an Ohmic loss of the Sn-O films. The maximum noise absorption predicted at an optimum surface resistance of the Sn-O films was about $150{\Omega}$. For this film, greater power absorption is predicted in the lower frequency region (about 70% at 1 GHz) than in conventional magnetic sheets of high magnetic loss, indicating that Ohmic loss is the predominant loss parameter for the conduction noise absorption in the low frequency band.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.49-52
• /
• 2007

We investigated hydrogen storage and production properties using redox system of iron oxide($Fe_{3}O_{4}$ + $4H_{2}$ ${\leftrightarrows}$ 3Fe + $4H_{2}O$) modified with rhodium, ceria and zirconia under atmospheric pressure. Reduction of iron oxide with hydrogen(hydrogen storage) and re-oxidation of reduced iron oxide with steam(hydrogen evolution) was carried out using a temperature programmed reaction(TPR) technique. On the temperature programmed studies, the effects of amounts of cerium and zirconium on the re-oxidation rate of partial reduced iron oxides were increased with increasing metal additives amount, but the rhodium amount showed little effect on the re-oxidation rate. On the thermal studies, the re-oxidation rates were enhanced with increasing temperature(300 $^{\circ}C$ < 350 $^{\circ}C$).

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.527-530
• /
• 2015

The electrical properties of nanostructured Gd-doped $CeO_2$ (n-GDC) as a function of temperature and water partial-pressure were investigated using ac and dc measurements. For n-GDC, protonic conductivity prevails under wet condition and at low temperatures (< $200^{\circ}C$), while oxygen ionic conductivity occurs at high temperatures (> $200^{\circ}C$) under both dry and wet conditions. The grain boundaries in n-GDC were highly selective, being conductive for protonic transport but resistive for oxygen ionic transport. The protonic conductivity reaches about $4{\times}10^{-7}S/cm$ at room temperature (RT).

• Journal of Surface Science and Engineering
• /
• v.48 no.2
• /
• pp.43-49
• /
• 2015

This study reports a fabrication of $TiO_2$ on the surface of dental implants by pulsed d.c. magnetron sputtering from a Ti target. A systematic investigation on the microstructure and mechanical properties of $TiO_2$ films was carried out with the variation of $O_2$ contents and substrate temperatures. The effects of deposition parameters on the fabricated structures were investigated by X-ray diffraction (XRD) technique and field emission scanning electron microscope (FE-SEM). Hydrophilic properties were evaluated by measuring water contact angles on the film surface. With increasing $O_2$ contents up to 40%, surface roughness of $TiO_2$ film increased while relatively smooth surface was obtained with 50% $O_2$ contents. Surface roughness and adhesion strength both increased as substrate temperature increased up to $200^{\circ}C$. From these results, hydrophilic and adhesive properties of the present $TiO_2$ films synthesized with 40% $O_2$ at $200^{\circ}C$ are regarded to be suitable for bio-compatible applications.