• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.43-43
• /
• 2003

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.15-19
• /
• 2007

This paper reports the effects of Ar ion beam surface treatment on a $SiO_2$ dielectric layer in organic thin film transistors. We compared the electrical properties of pentacene-based OTFTs, treated by $O_2$ plasma or Ar ion beam treatments and characterized the states of the surface of the dielectric by using atomic force microscopy and X-ray photoelectron spectroscopy. For the sample which received $O_2$ plasma treatment, the mobility increased significantly but the on/off current ratio was found very low. The Ar ion beam-treated sample showed a very high on/off current ratio as well as a moderately improved mobility. XPS data taken from the dielectric surfaces after each of treatments exhibit that the ratio of between Si-O bonds and O-Si-O bonds was much higher in the $O_2$ plasma treated surface than in the Ar ion beam treated surface. We believe that our surface treatment using an inert gas, Ar, carried out an effective surface cleaning while keeping surface damage very low, and also the improved device performances was achieved as a consequence of improved surface condition.

• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.151-155
• /
• 2004

Cold plasma of $O_2$ or Ar was irradiated on hydrophobic Kapton surface to attenuate or remove the electrostatic potential. A measurement on charge dissipation speed clarifies the obscure effect of plasma. These consequences reveal that $O_2$ plasma etching is more effective than Ar plasma. After 30 days, the dissipation speed of accumulated charge on initially etched sample has not changed under summer season.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ thin films have attracted great interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2/Ar$ plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage=600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2 the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is $480{\AA}/min$ at 10 % $BCl_3$ to $Cl_2/Ar$. The change of Cl, B radical density measured by optical emission spectroscopy(OES) as a function of $BCl_3$ percentage in $Cl_2/Ar$. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2/Ar$. To study on the surface reaction of (Ba, Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion bombardment etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and $TiCl_4$ is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about 65~70$^{\circ}$.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.618-625
• /
• 1996

고주파 마그네트론 스퍼터링(RF magnetron sputtering)법을 이용하여 자동차유리 성에 제거용 주석첨가 인듐산화물(indium tin oxide;ITO) 투명저항박막의 증착과 그 전기 및 광학 특성을 연구하였다. 기판온도는 A, T.-30$0^{\circ}C$, O2/(Ar+O2)비는 0-0.3로 변화시키며 실험하였다. 기판온도가 높아질수록, 그리고 O2/(Ar+O2)비가 높아질수록 박막의 증착속도는 감소하였다. 또한, 기판온도가 높아질수록 In2O3(400) 방향의 결정성은 감소하고, In2O3(222)와 (400) 피크만이 잔존하였다. 기판온도가 높아질수록 가시광영역의 광투과도는 향상되었고, 면저항은 20$0^{\circ}C$까지는 감소하였으나 20$0^{\circ}C$이상에서는 거의 일정하였으며, 결정립 크기는 온도가 높아질수록 증가하였다. 박막의 면저항은 O2/(Ar+O2)비가 0.1에서는 감소하고, 그 이상에서는 증가하였으며, 광투과도는 O2/(Ar+O2)비에 거의 영향을 받지 않았다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.747-751
• /
• 2010

In the study, the characteristics of the etched Zinc oxide (ZnO) thin films surface, the etch rate of ZnO thin film in $Cl_2/BCl_3/Ar$ plasma was investigated. The maximum ZnO etch rate of 53 nm/min was obtained for $Cl_2/BCl_3/Ar$=3:16:4 sccm gas mixture. According to the x-ray diffraction (XRD) and atomic force microscopy (AFM), the etched ZnO thin film was investigated to the chemical reaction of the ZnO surface in $Cl_2/BCl_3/Ar$ plasma. The field emission auger electron spectroscopy (FE-AES) analysis showed an elemental analysis from the etched surfaces. According to the etching time, the ZnO thin film of etched was obtained to The AES depth-profile analysis. We used to atomic force microscopy to determine the roughness of the surface. So, the root mean square of ZnO thin film was 17.02 in $Cl_2/BCl_3/Ar$ plasma. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the plasmas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1127-1134
• /
• 2000

$RuO_2$ thin films are prepared by RP magnetron reactive sputtering and their characteristics of crystalliBation,microstructure, surface roughness and resistivity are studied with various O2/(Ar+O2)ratios and substrate temperatures. As O2/(Ar+O2) ratio decreases and substrate temperature increases, the preferred growing plane of$RuO_2$ thin films are changed from (110) to (101) plane. With increase of the 021(Ar+O2) ratio from 2075 to 50%, the surface roughness and the resistivity of $RuO_2$ thin films increase from 2.38nm to 7.81nm, and from $103.6 \mu\Omega-cm\; to \; 227 \mu\Omega-cm$, respectively, but the deposition rate decreases from 47nm/min to 17nm/min. On the other hand, as the substrate temperature increases from room temperature to$500^{\circ}C$, resistivity decreases from $210.5 \mu\Omega-cm\; to \; 93.7\mu\Omega-cm$. $RuO_2$ thin film deposited at $300^{\circ}C$ shows a excellent surface roughness of 2.38 m. As the annealing temperature increases in the range between $400^{\circ}C$ and $650^{\circ}C$, the resistivity decreases because of the improvement of crystallinity. We find that RuO$_2$ thin film deposited at 20% of 02/(Ar+O2) ratio and $300^{\circ}C$ of substrate temperature shows excellent combination of surface smoothness and low resistivity so that it is well qualified for bottom electrode for ferroelectric thin films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.217-220
• /
• 2001

The possibility of cerium dioxide $(CeO_2)$ thin films as insulators of metal erroelectric insulator semiconductor (MFIS) structures have been studied. The etching $CeO_2$ thin films have been perfonned in an inductively coupled $Cl_{2}/CF_{4}/Ar$ plasma. The high etch rate of the $CeO_2$ thin film was $250\AA /m$ at a 10 % addition of $Cl_2$ into the $Ar(80)/CF_{4}(20)$. The surface reaction of the etched $CeO_2$ thin films was investigated using X-ray photoelectron spectroscopy (XPS) analysis. There are Ce-Cl and Ce-F bonding by chemical reaction between Cl, F and Ce. These products can be removed by the physical bombardment of incident Ar ions.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.407-410
• /
• 2012

The properties of Al-doped ZnO (AZO) films were investigated as a function of H2/(Ar + H2) gas ratio using an AZO (2 wt% Al2O3) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at 200 ℃ and in 2 × 10-2Torr working pressure and with various ratios of H2/(Ar + H2) gas. During the AZO film deposition process, partial H2 gas affected the AZO film characteristics. The electron resistivity (~ 9.21 × 10-4 Ωcm) was lowest and mobility (~17.8 ㎠/Vs) was highest in AZO films when the H2/(Ar + H2) gas ratio was 2.5%. When the H2/(Ar + H2) gas ratio was increased above 2.5%, the electron resistivity increased and mobility decreased with increasing H2/(Ar + H2) gas ratio in AZO films. The carrier concentration increased with increasing H2/(Ar + H2) gas ratio from 0% to 7.5%. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90% and an orientation of the deposition was [002] orientation for AZO films grown with all H2/(Ar + H2) gas ratios.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.217-220
• /
• 2001

The possibility of cerium dioxide (CeO$_{7}$ ) thin films as insulators of metal erroelectric insulator semiconductor (MFIS) structures have been studied. The etching CeO$_2$ thin films have been performed in an inductively coupled C1$_2$/CF$_4$/Ar plasma. The high etch rate of the CeO$_2$ thin film was 250 ${\AA}$/m at a 10% addition of Cl$_2$ into the Ar(80)/CF$_4$(20). The surface reaction of the etched CeO$_2$ thin films was investigated using X-ray photoelectron spectroscopy (XPS) analysis. There are Ce-Cl and Ce-F bonding by chemical reaction between Cl, F and Ce. These products can be removed by the physical bombardment of incident Ar ions.