• 한국자기학회지
• /
• 제12권6호
• /
• pp.201-205
• /
• 2002

경사형 모서리접합을 이용한 터널링 자기저항(tunneling magnetoresistance; TMR) 특성을 연구하였다. 박막 증착과 식각은 스퍼터링과 사이크로트론 전자공명 (electron cyclotron resonance; ECR) 장치를 각각 사용하였다. Si$_3$N$_4$ 장벽층을 이용한 접합의 다층구조는 NiO(60)/Co(10)/NiO(60)/Si$_3$N$_4$(2-6)/NiFe(10) (nm)이었다. 상하부 반강자성체 NiO에 삽입된 wedged 형태의 고정층 Co와 장벽층 Si$_3$N$_4$위에 경사진 비대칭 구조에서 자유층 NiFe간의 접합에서 일어나는 특이한 스핀의존 터널링 현상이 관찰되었다. 외부자장이 0Oe일 때와 접합경계선에 수직방향으로 90Oe일 때 측정한 접합소자의 전류전압특성 곡선이 현저하게 구별되어 나타났다. TMR의 인가 전압의존성은 $\pm$10 V일 때도 약 -10%을 유지하는 매우 안정된 자기저항 특성을 보여주었다.

• 신재생에너지
• /
• 제4권1호
• /
• pp.11-18
• /
• 2008

In-situ lithiated NiO has been manufactured as a conventional cathode material of molten carbonate fuel cell (MCFC), however this material has a weakness for commercialization of MCFC because NiO is spontaneously dissolved into the electrolyte under MCFC operating conditions, resulting in short circuit between cathode and anode. In this research, therefore, $Co(OH)_2$-coated Ni powder was prepared by precipitation method with controlling pH at low temperature and atmospheric pressure. Modified cathode was fabricated by a conventional tape casting method and sintered at 700$^{\circ}C$ in a $H_2/N_2$ atmosphere, Based on characterization result, Pore size distribution and porosity was suitable for the cathode of MCFC. According to the result of dissolution, Ni solubility of modified cathode was 33% lower than that of conventional cathode. In addition, modified electrode showed a good performance from the single cell operation.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 추계총회 및 학술발표회
• /
• pp.23-23
• /
• 2003

• 한국재료학회지
• /
• 제7권7호
• /
• pp.618-622
• /
• 1997

상온에서 측정한 Cd$_{x}$Ni$_{1-x}$Fe$_{2}$O$_{4}$의 Mossbauer 스펙트럼은 조성비에 따라 x값이 0.4이하인 시료에서는 준강자성에 의한 여섯개의 공명 흡수선, x값이 0.5인 시료에서는 이완된 형태의 공명흡수선, 그리고 x값이 0.6시료인 상자성에 의한 두개의 공명 흡수선이 나타났다. Cd$_{x}$Ni$_{1-x}$Fe$_{2}$O$_{4}$의 x값이 0.4이하인 시료의 초미세 자기장(H$_{hf}$)과 x값이 0.6 이상인 시료의 사중극자 분열치 (Q.S.)는 Cd농도가 증가함에 따라 감소한다. 시료의자기적 성질에 따른 이성질체 이동치(I.S.)의 차이는 있으나, Ni와 Cd이온의 농도에 따른 뚜렷한 의존성은 나타나지 않았다.다.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.773-777
• /
• 2016

A betavoltaic battery was prepared using radioactive $^{63}Ni$ attached to a three-dimensional single trenched P-N absorber. The optimum thickness of a $^{63}Ni$ layer was determined to be approximately $2{\mu}m$, considering the minimum self-shielding effect of beta particles. Electroplating of radioactive $^{63}Ni$ on a nickel (Ni) foil was carried out at a current density of $20mA/cm^2$. The difference of the short-circuit currents ($I_{sc}$) between the pre- and post-deposition of $^{63}Ni$ (16.65 MBq) on the P-N junction was 5.03 nA, as obtained from the I-V characteristics. An improved design with a sandwich structure was provided for enhancing performance.

• 한국표면공학회지
• /
• 제4권1호
• /
• pp.5-15
• /
• 1971

"Rapid Determination of Boric Acid in Nickel Plating Solution" by the addition of Na$_2$C$_2$O$_4$ and thus preventing the precipitation of i(OH)$_2$ during titiration , has previously been reported. In this paper, the exact amount of glycerine and the complexing possibility of oxalate with nickel has been determined by measn of conductivity titrations. This experimental work has been supported by the mathematical application of the Debye-Huckel and mass action equitions as well as statistical analysis. The results were ; (1) Fro determining boric acid in nickel plating solution, 20 ml of 400ml/ι glycerine was sufficient, since 97% of the H$_3$BO$_3$ was dissoicated by this addition. (2) In the absence of Na$_2$C$_2$O$_4$ the continious precipitation of Ni(OH)$_2$ during titration with NaOH even past end -point for boric acid determination resulted in considerable anlaytical error. (3) In the presence of Na$_2$C$_2$O$_4$ during titration , Ni++ combined with C$_2$O$_4$-to form NiC$_2$O$_4$. The solution with this precititate of very fine, colloidal , trantsparent particles, remained quite clear for approximately 2 hours. Therefore it was shown that the presence of Na$_2$C$_2$O$_4$ prevents the formation of gross Ni(OH)$_2$ precititation by forming NiC$_2$O$_4$ instead of a complex salt with Ni++ , which did not interfere with the visible determination of the end point for boric acid with NaOH titation. This observous may be interpreted in the light of the previously published solubility ratio for NiC$_2$O$_4$ and Ni(OH)$_2$, 0.3mg/100g H$_2$O(25$^{\circ}C$), respectively. Precipitation of the less soluble , albeit transparent salt, NiC$_2$O$_4$ precluded therefore the precipitation of the Ni(OH)$_2$ salt.

• 한국해양학회지:바다
• /
• 제4권3호
• /
• pp.215-225
• /
• 1999

심해저 표층 퇴적물 중 주원소, 미량원소, 희토류 원소의 수직 함량분포 및 변화의 원인을 구명하기 위해 북동 태평양 클라리온-클리퍼톤 균열대(Clarion-Cliperton fracture zone, C-C 지역) 중남부에 위치한 한국심해환경연구(Korea Deep-sea Environmental Study, KODES) 지역에서 다중 주상 및 상자형 퇴적물 채취기를 이용해 주상시료 6개를 채취 분석했다. KODES 지역 주상 시료는 갈색인 Unit I과 연갈색인 Unit II로 구분되며, Unit I은 함수량이 높은 준액상층(peneliquid layer)인 반면 Unit II는 상대적으로 고화가 진행된 층이다. 두 Unit 간 주원소, 희토류 원소 그리고 Cu, Sr, Rb 등 원소는 함량 차이는 적으나 Mn, Ni, Co 등 원소는 Unit II에 비해 Unit I에서 함량이 2~3배 높다. R-형 요인 분석결과 연구지역 퇴적물은 Al-Ti-K-Mg-Fe-Rb-Ce 등으로 구성된 규산염 상, Ca-P-Cu-Sr-3+REEs(Trivalent Rare Earth Elements)로 구성된 인회석 상, 그리고 Mn-Ni-Co로 구성된 망간산화물 상으로 구분되는데, 규산염 상과 인회석 상은 두 Unit 간 요인점수가 큰 차이를 보이지 않는 반면 망간산화물 상은 Unit I에서 요인점수가 높다. 한편, 두 Unit는 Ni/Cu 비에 의해 구분되는데, Unit I의 Ni/Cu 비가 Unit II보다 2배 높다. 이것은 미세환원환경에서 재동된 후 준액상층인 Unit I에 산화물로 재침전된 Ni, 그라고 유기물과 함께 해저면으로 공급된 후 Unit I에서 유기물이 분해되면서 재동되어 인회석에 포함된 Cu 의 지화학적 거동 차이에 기인한 것으로 해석된다.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.352-358
• /
• 2005

By calcining at $750^{\circ}C$ for 30 h in $O_2$ stream after milling, $LiNi_{1-y}M_yO_2(M=Zn^{2+},\;Al^{3+}$, and $Ti^{4+}$, y = 0.005, 0.01, 0.025, 0.05, and 0.1) were synthesized and their electrochemical properties were investigated. All the samples had R3m structure. $LiNi_{1-y}Zn_yO_2$ (y = 0.025, 0.05, and 0.1) contained ZnO anuor $Li_2ZnO_2$ as impurities. Among the samples substituted with the same element, the samples with relatively large value of $I_{003}/I_{104}$ and the smallest R-factor had the largest first discharge capacity and good cycling performance. $LiNi_{0.975}A1_{0.025}O_2$ had the largest first discharge capacity (172.5 mAh/g) and good cycling performance (about $89.4\%$ of the first discharge capacity at the 20th cycle). This sample had the largest value of $I_{003}/I_{104}$ and the smallest R-factor among all the samples. In addition, the particles of this sample were finer and their size was more homogeneous than the other samples. $LiNi_{0.95}A1_{0.05}O_2$ had relatively large first discharge capacity 150.4 mAh/g and good cycling performance.

• Journal of Magnetics
• /
• 제5권2호
• /
• pp.50-54
• /
• 2000

NiMn-pinned spin valve films consisting of a layered glass/NiFe/Co/Cu/Co/NiFe/NiMn/Ta stack were made by do magnetron sputtering. After deposition, the structure was annealed in a series of cycles each including three hours at $220^\circ C, 2\times10^{-6}$ Torr, in a field of 350 Oe, to create an ordered antiferromagnetic structure in the NiMn layer and produce a strong unidirectional pinning field in the pinned magnetic layer, Optimum spin valve properties were obtained after seven annealing cycles, or 21 hours at $220^\circ C$, and were : MR ratio 1%, exchange coupling field 620 Oe, and coercivity of pinned layer 250 Oe. The exchange coupling field remained constant up to an operating temperature of $175^\circ C$, and the blocking temperature was about $380^\circ C$.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 2002년도 제9회 학술 발표회 프로그램과 논문초록
• /
• pp.50-50
• /
• 2002

The heterologous expression of sodN gene from Streptomyces seoulensis in Streptomyces lividans together with the gel filtration and sedimentation equilibrim data indicated that the quaternary structure of NiSOD is homohexamer, which is novel among SODs, not the previously reported homotetramer. The EPR spectrum of $^{61}$ Ni (I = 3/2) substituted NiSOD showed a clear resolved hyperfine structure at g=2.016, unambiguously identifying that the EPR signal from NiSOD is due to Ni.(omitted)