• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.201-206
• /
• 2019

In this study, we performed an electrowinning process for effective removal of metals (Cu and Ni) in solution and their recovery as solid forms. A complete removal of Cu and Ni (1,000 mg/L) was observed during four times recycling test, indicating that our electrowinning system can ensure the efficient metal removal with high stability and durability. In addition, we investigated effect of operation parameters (i.e., concentration of boric acid only for Ni, variation of pH, concentration of electrolyte ($H_2SO_4$), and cell voltage) on the efficiency of metal removal (Cu and Ni) during the electrowinning. The addition of boric acid significantly enhanced removal efficiency of Ni as the concentration of boric acid increased up to 10 g/L. Compared to negligible pH effect (pH 1, 2, and 4) on the Cu removal, we observed the increase in removal efficiency of Ni as the pH increased from 1 to 4. The electrolyte concentration did not significantly influence the removal of Cu and Ni in this study. We also obtained great removal rates of Cu and Ni at 2.5 V and 4.0 V, which were much faster than those at lower voltages. Finally, almost 99% of each Cu and Ni (1,000 mg/L) was selectively removed from the mixture of metals by adjusting pH and addition of boric acid after the completion of Cu removal. The findings in this study can provide a fundamental knowledge about effect of important parameters on the efficiency of metal recovery during the electrowinning.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.424-430
• /
• 2022

In the study, Ni²⁺ (nickel) removal from synthetically prepared wastewater by electrocoagulation method, which is one of the electrochemical treatment processes, was investigated and parameters such as current density, pH, mixing speed, initial Ni²⁺ concentration, supporting electrolyte type and concentration were determined to determine Ni²⁺ removal efficiencies effects were studied. Experiment conditions during 30 minutes of electrolysis; the current density was determined as 0.95 mA/cm², the initial pH of the wastewater was 6, the mixing speed was 150 rpm, and the initial nickel concentration was 250 mg/L. The Ni²⁺ removal efficiency was obtained as 75.99% under the determined experimental conditions, while the energy consumption was calculated as 3.15 kW-h/m³. In the experiments, it was observed that the type and concentration of the supporting electrolyte did not have a significant effect on the Ni²⁺ removal efficiency. In the trials where the effect of the support electrolyte concentration was examined, the Ni²⁺ removal efficiency was 75.99% in the wastewater environment without the supporting electrolyte, while the Ni²⁺ removal efficiency was 81.55% when 7.5 mmol/L NaCl was used after the 30-minute reaction, and the energy consumption was 2.15 kW-h/m³ obtained as. As a result of the studies, it was concluded that the electrocoagulation process can be applied in the treatment of wastewater containing Ni²⁺.

• Advances in environmental research
• /
• 제3권2호
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Advances in environmental research
• /
• 제6권3호
• /
• pp.217-227
• /
• 2017

In this study, the elimination of $Ni^{2+}$ using 13X sorbent due to an electrostatic interaction was reported. The significant factors including pH, time and 13X sorbent amount were investigated using Box-Behnken design (BBD). In the optimum experimental conditions, the linear rang and limit of detection of the proposed method were 0.1-20 and $0.102mg\;L^{-1}$, respectively. The precision as RSD% was 1.3% for concentration of $2mg\;L^{-1}$. Concerning the excellent recoveries in a short time with highly efficient sample clean-up and removal, this method may be a very powerful and innovative future sample removal technique. To the best of our knowledge, this is the first report on using BBD for optimizing the parameters affected the removal of $Ni^{2+}$ by 13X zeolite sorbent.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.782-784
• /
• 2008

Ag/Ni bimetallic cluster loading on porous carbon fibers was accomplished in order to enhance the HCl removal efficiency of the carbons. The surface properties of the Ag/Ni/carbons were determined by XRD and SEM. N2/77 K adsorption isotherms were investigated using BET and Boers t-plot methods. The HCl removal efficiency was confirmed by a gas chromatography technique, and it was found that that efficiency was predominantly improved in the presence of Ag/Ni clusters compared with the efficiencies of the as-received and single-metal-plated carbons. This indicates that synergetic reactions exist between Ag/Ni and HCl gas, resulting in advanced HCl removal capacity of porous carbons.

• 한국환경과학회지
• /
• 제11권7호
• /
• pp.729-735
• /
• 2002

In order to examine the inhibition effect of other heavy metal ions on the removal of heavy metal ions by crab shell in aqueous solution, 10 heavy metal ions $(Cr^{3+},\;Cd^{2+},\;Ni^{2+},\;Zn^{2+},\;Hg^{2+},\;Cu^{2+},\;Mn^{2+],\;Fe^{2+},\;Fe^{3+},\;Pb^{2+})$ were used as single heavy metal ions and mixed heavy metal ions, respectively. In single heavy metal ions, $Pb^{2+},\;Cr^{3+},\;Cu^{2+}$ were well removed by crab shell, however, $Cd^{2+},\;Ni^{2+},\;Zn^{2+},\;Mn^{2+}$ were not. The heavy metal removal increased as the increase of covalent index (Xm$^2$r), and the relationship classified heavy metal ions as 2 heavy metal groups $(Fe^{3+},\;Fe^{2+},\;Cu^{2+},\; Cr^{3+},\;Mn^{2+},\;Ni^{2+},\;Zn^{2+}\;group\;and\;Pb^{2+},\;Hg^{2+},\;Cd^{2+}\;group)$. In mixed heavy metal ions, the removals of $Fe^{2+},\;Fe^{3+},\;Pb^{2+},\;Cu^{2+}$ as 0.49 m㏖/g, regardless of the existence of other heavy metal ions, were similar to the result of single heavy metal ions experiment. The removals of $Mn^{2+},\;Cd^{2+},\;Ni^{2+}$ decreased as the existence of other heavy metal ions, however, the removal of $Zn^{2+},\;Cr^{3+},\;Hg^{2+}$ increased.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.588-595
• /
• 2020

반도체 산업용 9N 이상의 초고순도 N₂, Ar 등 불활성 가스 제조를 위해 가스 정제공정에 사용되고 있는 Ni 촉매의 물성 평가 및 촉매적 특성을 확인하였다. 조성이 다른 원기둥 형태의 C1, 츄러스 형태의 C2의 두 가지 Ni 촉매에 대해 비교 평가를 진행하였다. Ni 촉매의 형상과 미세구조를 분석하기 위해 광학현미경과 FE-SEM을 이용하였으며, 조성 확인 및 물성을 분석하기 위해 EDS, XRD, 그리고 micro-Raman 분석을 이용하였다. 또한 Ni 촉매의 비표면적 및 촉매적 특성을 확인하기 위해 BET, Pulse Titration 분석을 진행하였다. 조성 분석결과, C1의 경우, 상대적으로 graphite가 불순물로 다량 포함되어 있는 것을 확인하였으며, C2는 C1에 비해 Ni의 함량이 높은 것을 확인하였다. 비표면적 분석 결과, C2의 비표면적이 C1보다 약 1.69배 정도 큰 것을 확인할 수 있었다. 촉매적 특성분석 결과, 상온에서 O₂와 CO 불순물 제거 정도가 C2가 우수함을 확인하였다. 따라서 반도체 산업용 초고순도 불활성 기체 제조를 위한 Ni 촉매로는 불순물이 적고, 비표면적이 크며, 상온에서 O₂와 CO 제거 성능이 우수한 C2가 적합함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.605-609
• /
• 2005

Chemical mechanical polishing (CMP) of Ni was performed by the various ratios of four kinds of oxidizers and an addition of alumina powders as an abrasive in each slurry with the different oxidizers. Moreover, the interaction between the Ni and the each oxidizer was discussed by potentiodynamic polarization measurement, in order to compare the effects of Ni-CMP and electrochemical characteristics on the Ni with the different oxidizers. As an experimental result, the removal rate of Ni reached a maximum at 1 $vol\%$ of $H_2O_2$. Also the removal rates of Ni increased with the audition of alumina abrasives in each slurry. The potentiodynamic polarization of Ni under dynamic condition showed a significant difference in electrochemical behavior by addition of $H_2O_2$ in solutions. Ni showed the perfect passivation behavior in solution without $H_2O_2$ under potentiodynamic polarization condition, while active dissolution dominates in solution with the addition of $H_2O_2$. The results indicate that the surface chemistry and electrochemical characteristics of Ni play an important role in controlling the polishing behavior of Ni.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.283-294
• /
• 2020

This work aims at studying the feasibility of continuous removal of mixed heavy metal ions from simulated zinc plating wastewaters by coupling a microbial fuel cell and a microbial electrolysis cell in batch and continuous modes. The discharging voltage of MFC increased initially from 0.4621 ± 0.0005 V to 0.4864 ± 0.0006 V as the initial concentration of Cr⁶⁺ increased from 10 ppm to 60 ppm. Almost complete removal of Cr⁶⁺ and low removal of Cu²⁺ occurred in MFC of the MFC-MEC-coupled system after 8 hours under the batch mode; removal efficiencies (REs) of Cr⁶⁺ and Cu²⁺ were 99.76% and 30.49%. After the same reaction time, REs of nickel and zinc ions were 55.15% and 76.21% in its MEC. Cu²⁺, Ni²⁺, and Zn²⁺ removal efficiencies of 54.98%, 30.63%, 55.04%, and 75.35% were achieved in the effluent within optimum HRT of 2 hours under the continuous mode. The incomplete removal of Cu²⁺, Ni²⁺ and Zn²⁺ ions in the effluent was due to the fact that the Cr⁶⁺ was almost completely consumed at the end of MFC reaction. After HRT of 12 hours, at the different sampling locations, Cr⁶⁺ and Cu²⁺ removal efficiencies in the cathodic chamber of MFC were 89.95% and 34.69%, respectively. 94.58%, 33.95%, 56.57%, and 75.76% were achieved for Cr⁶⁺, Cu²⁺, Ni²⁺ and Zn²⁺ in the cathodic chamber of MEC. It can be concluded that those metal ions can be removed completely by repeatedly passing high concentration of Cr⁶⁺ through the cathode chamber of MFC of the MFC-MEC-coupled system.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.267-274
• /
• 2001

원격 수소 플라즈마에 의한 Si 웨이퍼 표면 위의 Cr, Ni 및 Cu불순물의 제거 효과를 조사하였다. Si 웨이퍼를 이 불순물들이 포함되어 있는 아세톤으로 집중적으로 오염시켰으며 최적 공정조건을 결정하기 위해 rf-power와 plasma노출시간을 변화시키면서 실험을 수행하였다. 리모트 수소 플라즈마 세정 후 Si 웨이퍼 표면은 Total X-ray Reflection Fluorescence(TXRF), Surface Photovoltage(SPV) 및 Atomic Forece Microscope(AFM)에 의해 분석되었다. 리모트 수소 플라즈마 세정 후 Cr, Ni 및 Cu불순물의 농도는 감소하였고 소수 전하운반자수명은 전반적으로 증가하였다. 또한 AFM 분석결과 표면 거칠기는 전반적으로 향상되었고 Si 기판에 거의 손상을 주지 않았다. TXRF 분석결과는 리모트 수소 플라즈마 세정이 적절한 공정 조건에서 이루어질 때 금속 오염물의 제거에 아주 효과적임을 보여주었다. 또한, Cr, Ni 및 Cu 불순물의 제거는 $SiO_2$가 제거될 때 $SiO_2$에 묻어 함께 제거되는 이른바 lift-off mechanism에 의한 것으로 사료된다.