• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.16-16
• /
• 2010

The multilayer piezoelectric transformer was manufactured using $Pb(Zn_{1/2}W_{1/2})O_3-Pb(Mn_{1/3}Nb_{2/3})O_3-Pb(Zr_{0.48}Ti_{0.52})O_3$ (abbreviated as PZW-PMN-PZT) ceramics and their electrical properties were investigated. The $k_{eff}$ of the input and the output calculated from the resonant and anti-resonant frequencies were 0.403 and 0.233, respectively. The voltage step-up ratio showed the maximum value in the vicinity of 81kHz. The multilayer piezoelectric transformer showed the temperature rise of about $36^{\circ}C$ at the output power of 12w.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.221-225
• /
• 2015

The sintering effect on the microstructure, electrical properties, and dielectric characteristics of ZnO-V₂O₅-MnO₂-Nb₂O₅-Dy₂O₃-based ceramics was investigated. With the increase of sintering temperature from 875 to 950℃, the density of the sintered pellets decreased from 5.57 to 5.45 g/cm³ and the average grain size increased from 4.3 to 10.9 μm. The breakdown field decreased noticeably from 6,095 to 996 V/cm with the increase of sintering temperature. The varistor ceramics sintered at 900℃ exhibited the best nonlinear properties: 39.2 in the nonlinear coefficient and 0.24 mA/cm² in the leakage current density. The dielectric constant increased sharply from 658.6 to 2,928.8 with the increase of sintering temperature. On the whole, the dissipation factor exhibited a fluctuation with the increase of the sintering temperature, and a minimum value of 0.284 at 900℃.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.160-164
• /
• 2015

In this study, $(1-x)Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3+xCeMnO_3$ (x= 0~0.02) ceramics were prepared by Columbite precursor method. The phase structure, ferroelectric and piezoelectric properties were systematically investigated. It was found that PMW-PNN-PZT possessed superior electrical properties due to its composition close to the MPB (morphotropic phase boundary). Coercive electric field of 10.05 [kV/cm] and density of 7.88 [$g/cm^3$] were obtained when the substitution amount of $CeMnO_3$ is x=0.02. In contrast, specimens with x=0.01 showed the mechanical quality factor($Q_m$) of 1,091 and the electromechanical coupling factor($k_p$) of 0.613.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.251-254
• /
• 1998

The ($0.8BaTiO_3-0.1SrTiO_3-0.1MgTiO_3$)+$0.006Nb_2O_5$ ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300C for 3hours and then annealed at $1,100^{\circ}C$ for 3hours in a atmosphere (air) to be painted on the surface with CuO paste. The results of the temperature and frequency are varied, the dielectric constant and loss tangent are unsuitable for BL capacitor. The dielectric constants were varied to be negative temperature coefficient(2.000-3,000) in the temperature range between -10 and $140^{\circ}C$, the dissipation factors (tan $\delta$) were some high(0.1-0.3). It was not grain insulation, in cause of the some difficult to be annealed temperature with CuO paste and fired atmosphere. But, we have some different annealing temperature and fired atmosphere, it will be suitable BL(Boundary Layer)capacitor.

• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.1
• /
• pp.19-28
• /
• 1995

RuO2 함량을 각각 달리한 pyrochlore 구조의 Pb2Ru2O6.5분말을 제조하여 이 분말과 유기 vehicle 유기용매를 혼합하여 저항 페이스트를 제조한후 인쇄, 소결과정을 거쳐 전반적 인 물성을 분석하였고 두 종류의 페이스트에 TCR보정용 첨가제로서 ZrO2를 첨가한 경우 처가량에 따라 저항값은 크게 변화하였으나 TCR 은 약간의 변화를 보였으며 Nb2O5의 경우 저항값이 크게 증가하였으며 TCR은 2wt%까지 첨가시 매우 안정적인 값을 나타내었다. 고 정항의 경우 CuO의 첨가시 저항값이 크게 감소 하였으며 TCR은 첨가량에 따라 증가하였 으나 3wt%이상 첨가시 저항체 표면이 심하게 거칠어지는 결과를 보였다.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1723-1725
• /
• 1999

This paper is the study for piezoelectric properties of PMN-PT-PZ composition for high power piezoelectric device. It needs the properties such as high mechanical quality factor(Qm), high electromechanical coupling coefficient(kp) and high dielectric strain constant$(d_31)$, and the stable electromechanical properties under high vibration level. For acquiring this results, the value of x is changed in 0.1Pb$(Mn_{1/3}Nb_{2/3})O_3$+(0.9-x)$PbZrO_3+xPbTiO_3$ composition to find MPB(morphotropic phase boundary), and the piezoelectric constants is measured by resonance-antiresonance frequency method, based on IRE Standard. Also, it is measured as a function of the amount of additive, $Nb_2O_5$. When the composition is applied to high power device, the electromechanical properties is measured by laser vibrometer to confirm the reliablity under high vibration level. From these results, PMN-PT-PZ composition is shown excellent properties and capacity of application to high power device.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.408-414
• /
• 2006

[ $MoSi_2$ ] alloys with Al, B or Nb were prepared by an advanced consolidation process that combined mechanical alloying with pulse discharge sintering (complex forming) to improve the mechanical properties. Their microstructure and mechanical properties were investigated. The $MoSi_2$ alloys fabricated by complex forming method showed very fine microstructure when compared with the sample sintered from commercial $MoSi_2$ powders. Alloys made from powders milled in Ar gas had fewer silica or alumina phases as compared to their counterparts sintered from powders milled in air. In densification of the sintered body, addition of B was more effective than Al or Nb. Both Victors hardness and tensile test indicated that the alloy fabricated by the complex forming method showed better properties than the sample sintered from commercial $MoSi_2$ powders. The Al added alloy sintered from the powders milled in air had the superior mechanical properties due to the suppression of $SiO_2$ and formation of fine $Al_2O_3$ particles.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.339-346
• /
• 1990

미소변위소자에 적합한 전왜세라믹스를 제조하기 위하여 0.85Pb(Zn$_{1}$3-x/MgxNb$_{2}$3/) $O_{3}$-0.10BaTi $O_{3}$-0.05PbTi $O_{3}$조성으로 Mg(mol%)를 변화시키면서 시편을 제조하고 구조적, 유전적, 전기적 특성 및 온도 안정성을 관찰하였다. 큐리온도는 Mg(mol%)가 증가함에 따라 감소하였고 Mg(mol%)가 0.15일 때 유전상수가 가장 높았으며 완만도는 -3.9, 산만도.DELTA.Tc는 21로 가장 컸다. 전계에 따른 유전상수는 감소하였고 Mg(mol%)가 증가할수록 압전정수 d$_{31}$은 감소하였으나 0.05, 0.10, 0.15일 때는 거의 일정하였다. Mg(mol%)가 0.15까지 증가함에 따라 전왜정수 Q$_{31}$은 감소하였고 그 이상에서는 Mg(mol%)가 1/3일때 가장 컸으며 ES-1시편에서의 AC 60(Hz), 11(kV/cm) 전계(electric field)에 의한 왜형을 253*$10^{-6}$을 나타냈다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.293-293
• /
• 2007

현재 활발하게 진행되고 있는 이차전지 양극 물질 중 저렴한 가격과 친환경성으로 각광받고 있는 $LiMn_2O_4$ spinel 산화물은 여러 장점에도 불구하고 용량 값이 기존 알려져 있던 Co-계 산화물에 비해 떨어지고 cycle 특성 역시 현저하게 이어진다. 이는 Mn이 전해액과의 반응에 있어 구조적인 안정성을 지니지 못하여 용출되어 나타나는 특성이다. 이번 연구에서는 Mn의 용출을 저지하고 용량의 향상을 이룰 수 있는 전이금속 중 Fe산화물을 치환하여 구조적 안정성을 갖도록 하였다. Fe산화물 치환을 통해 기본적 물성의 변화와 전기적 특성 변화를 측정하였고 공정에서의 온도 및 입도에 따른 영향도 확인하였다. Fe산화물은 Mn 자리의 3+와 4+의 자리에 치환되어 용량을 증대시키고 사이클 특성을 10회 기준으로 20%가량 향상시키는 효과를 가져왔다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.323-323
• /
• 2010

PNN-PZT계 세라믹스를 $Pb(Ni_{1/3}Nb_{2/3})_{0.4}(Zr_{0.48}Ti_{0.52})_{0.6}O_3$ 조성으로 설계하고, 이에 낮은 융점의 NiO를 1wt% 첨가하여 저온소결 특성을 평가하였다. 일반적인 세라믹 분말 소결법을 이용하여 시편을 제작하였으며, 이때의 소결온도는 $850{\sim}105^{\circ}C$ 범위에서 변화시켰다. 소결체의 압전 및 유전적 특성을 평가를 하고. SEM 및 XRD를 이용한 미세구조 및 상 분석도 수행하였다. 이러한 실험 결과, PNN-PZT 세라믹은 NiO의 첨가로 $1000^{\circ}C$ 정도에서도 저온소결이 가능한 것을 확인하였다.