• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.212-217
• /
• 1997

A strain of Bacillus sp. WS-14 was isolated from soil. Medium optimization for ${\beta}-mannanase$ production by Bacillus sp. WS-14 was performed. Effect of various carbon sources on ${\beta}-mannanase$ production was investigated and locust bean gum was the most effective for ${\beta}-mannanase$ production. ${\beta}-mannanase$ activity and cell growth increased with increasing the concentration of locust bean gum, however, the amounts were not significant. Among nitrogen sources, soytone was the most effective for ${\beta}-mannanase$ production. Inorganic compounds such as $KH_2PO_4,\;NaCl\;Na_2CO_3\;and\;MgSO_4{\cdot}7H_2O\;on\;{\beta}-mannanase$ production were optimized for ${\beta}-mannanase$ production. Locust bean gum of 10.0 g/l, soytone of 5.0 g/l, $KH_2PO_4$ of 2.0 g/l, NaCl of 10.0 g/l, $MgSO_4{\cdot}7H_2O\;of\;0.2\;g/l,\;Na_2CO_3$, of 2.0 g/l were selected as optimum content. Production of ${\beta}-mannanase$ by using the optimum medium was carried out. The maximum ${\beta}-mannanase$ activity of 20.8 unit/ml could be obtained after 14 h fermentation which corresponed to the productivity of ${\beta}-mannanase$ of 1.48 unit/ml-h.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.4
• /
• pp.243-248
• /
• 2002

The effects of basal media, carbon, nitrogen, phosphate and some major macro elements on growth and shikonin production in Lithospermum erythrorhizon hairy root culture were studied. Among examined media, growth of hairy root cultured in B5 liquid medium was rapid, whereas shikonin production was high in MS liquid medium. Under B5 basal medium, sucrose concentration for optimal growth and shikonin production was 9% and 4% respectively. The growth and shikonin production on pH changes in B5 medium resulted little effect in pH 5.8 to pH 8.8 ranges, whereas growth was decreased dramatically in both above 8.8 and under 5.8. Nitrogen source and concentration effected on the growth and shikonin production. The highest growth rate was in B5 medium (50 mM $KNO_3$ and 1 mM $NaH_2PO_4)$, whereas the highest shikonin production was in the condition supplemented with 5 mM $KNO_3$ and 10 mM $NaH_2PO_4$.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.213-218
• /
• 1991

Addition of salts or their mixtures and microwave heating were studies for their effects on Kakdugi fermentation. The Kakdugi, a Korean fermented Chinese radish, were prepared by salting in 15% NaCl solution and fermented at $25^{\circ}C$. From the results, a first order reaction relationship was found between salt permeated into the radish and time during brining in $5{\sim}10%$ NaCl solution. Addition of 0.05M KCl into 15% NaCl brining solution or microwave heating of salted radish for 3 minutes showed a little decreasing effect on Kakdugi fermentation rate while beating for 1 or 2 minuted resulted a rather increase. When three different salt mixtures in the concentration range of $0.001{\sim}0.01\;M$ were added into half fermented Kakdugi(appr. pH 4.4), the fermentation was greatly controlled based on pH change. Among the salt mixtures, mixture III$(Na_2HPO_4,\;Na_2PO_4,\;NaNO_2,\;Ca\;EDTA,\;Sod.\;citrate)$ showed a most significant effect where the time required to reach pH 4.0 after addition was extended by more than 6 folds when it was compared to the control method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.2
• /
• pp.57-66
• /
• 1988

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul and suspended particulate was collected by Andersen air sampler during this period. The samples were analyzed for 16 components $(SO_n^{2-}, NO_3^-, Cl^-, PO_4^{3-}, NH_4^+, F^-, Al, Fe, K, Cu, Mn, Na, Pb, Mg, Ca, Cd)$. The conclusions are as follwes: 1. Total suspended particulate concentation during the period of sandy dust phenomena was 489 $\mug/m^3$ (ordinary times: 140-125 $mug/m^3$) 2. The water - soluble ion component concentration of suspended particulate during the period of sandy dust phenomena was few and the metal concentration of that was more than that of ordinary times. 3. The cumulative frequency distribution of suspended particulates in logarithmic diagram did not show similar to normal log distribution during the period of sandy dust phenomena. 4. $SO_4^{2-}, NO_3^-, Cl^-, and PO_4^{3-}$ was onsided to coarse particle, and $NH_4^+$ and F to fine particle in the size distribution of water - soluble ion components during the period of sandy dust phenomena. 5. Metal concentration was high and Al, Fe, Cu, Mn, Na, Mg, and Ca was onsided to coarse particle, and K, Pb, and Cd to fine particle in the size distribution of metal components. 6. During the period of sandy dust phenomena the quantity of respirable particle (< 1 $\mum$) was about 3 times and that of metal components were about 2 - 11 times than that of ordinary times. 7. The concentrations of $NO_3^-, Cl^-, NH_4^+$ at ordinary times were 1.1 - 4 time than that of the period of sandy dust phenomena.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.74-79
• /
• 2018

To increase corrosion resistance of Mg alloy, AZ31 and AZ91 were PEO treated with different applied voltage and time conditions. We used Na-P and Na-Si system electrolyte. Crystalline phase and morphology were investigated. MgO was Most common crystal phase and vitreous phase could be found. Crystalline phase of $Na_{3.59}Mg_{2.71}(PO_4)_3$ and $Mg_2SiO_4$ also could be found. Porosity of oxidized surface tends to decrease with increasing PEO applied voltage, treat time and concentration of electrolyte, after then, size of pore increased and total number of pore decreased, distinctly.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.322-323
• /
• 2012

This study discussed the formation of phosphate conversion coatings on AZ31 Mg alloy (AZ31) from the zinc phosphating bath with various concentrations of sodium fluoride (NaF). The effects of NaF on the formation, structure, composition and electrochemical behavior of the phosphate coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD) weight balances, open circuit potential (OCP) transients, potentiodynamic polarization curves and immersion test. The coatings were composed of two layers: an outer $Zn_2(PO_4)_3.4H_2O$ (hopeite) crystal layer and an inner amorphous of $MgZn_2(PO_4)_2$. NaF concentration is emphasized to be highly effective in the formation of the hopeite crystal and etching and coating rates. Potentiodynamic polarization and immersion test showed that the coatings formed in the zinc phosphating bath with addition of NaF have much higher corrosion resistance than bare AZ31.

• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.223-229
• /
• 2006

To develop multifunctional microbial inoculant, an insluble phosphate-solubilizing bacterium with antifungal activity was isolated from plant rhizospheric soil. On the basis of its morphological, cultural and physiological characteristics and Biolog analysis, this bacterium was identified as Pseudomonas fluorescens RAF15. P. fluorescens RAF15 showed antifungal activities against phytopathogenic fungi Botrytis cinerea and Rhizoctonia solani. The optimal medium composition and cultural conditions for the solubilization of insoluble phosphate by P. fluorescens RAF15 were 1.5% of glucose, 0.005% of urea, 0.3% $MgCl_2{\cdot}6H_2\;0.01%\;of\;MgSO_4{\cdot}7H_2O\;0.01%,\;of\;CaCl_2{\cdot}2H_2O$, and 0.05% of NaCl along with initial pH 7.0 at $30^{\circ}C$. The soluble phosphate production under optimum condition was 863 mg/L after 5 days of cultivation. The solubilization of insoluble phosphates was associated with a drop in the pH of the culture medium. P. fluorescens RAF15 showed resistance against different environmental stresses like $10-35^{\circ}C$ temperature, 1-4% salt concentration and pH 2-11 range. The strain produced soluble phosphate to the culture broth with the concentrations of 971-1121 mg/L against $CaHPO_4$, 791-908 mg/L against $Ca_3(PO_4){_2}$, and 844 mg/L against hydroxyapatite, respectively. However, the strain produced soluble phosphate to the culture broth with the concentrations of 15 mg/L against $FePO_4$, and 5 mg/L against $AlPO_4$, respectively.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.131-137
• /
• 1996

This analysis has been conducted to get some basic data of the composition of culture solution mostly in inorganic ions, and water quality in hydroponic farms in Chollabuk - do. pH range was shown from 6.00 to 7.65 and the average was 6.58. EC range was shown from 0.01 to 0.94 mS/cm and the average was 0.28 mS/cm. Na concentration ranged from 4.71 to 145.44 ppm and Cl concentration ranged from 0 to 171.80 ppm were shown and their average were 24.24 ppm and 26.33 ppm, respectively. Na and Cl concentrations were higher as 7.7%, compared to those of other farms, which could cause the salt accumulation in the substrate mats. K, Ca and Mg concentrations were ranged from 0.93 to 17.38 ppm, 2.29 to 34.30 ppm and 0.70 to 18.61 ppm, respectively. Average concentrations were 3.06 ppm in K, 13.00 ppm in Ca and 4.91 ppm in Mg. 50, and PO$_4$ concentration ranged from 0.63 to 59.79 ppm and 0 to 4.28 ppm were shown and their average were 18.11 and 0.51 ppm. Cu concentration was ranged from 0 to 0.32 ppm and 0 to 6.22 ppm in Zn concentration. Their average were 0.02 ppm and 0.52ppm, respectively.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.173-178
• /
• 1988

The purpose of the study was to confirm the influence of fluoride to enamel decalcification. Specimens were prepared from 20 extracted teeth. Every tooth was sliced into 4 pieces by means of seperating disc. The pieces with sound enamel were distributed to 4 groups. 1st group was treated with 0.5% NaF solution for 2 minutes. 2nd group was treated with 0.5% NaF solution for 10 minutes. 3rd group was treated with 1% NaF solution for 2 minutes. 4th group was treated with 1% NaP solution for 10 minutes. The enamel surface of each specimen were decalcified with 30% $H_3PO_4$ for 2 minutes and the findings through electron microscope were as follows; 1. The degree of decalcification on the 1st group was greater than that of the 2nd group. 2. Roughness of the 3rd group was slightly higher than that of the 4th group. 3. Under the same procedure of decalcification, the specimen treated by higher conceutration of NaF solution for same length of time showed less decalcified picture. 4. Under the same procedure, of decalcification, the specimens treated by same concentration of NaF solution for different length of time, were compared and found longer the time less decalcified.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.550-556
• /
• 1996

A complex medium was developed for the production of microbial cellulose by Acetobacter xylinum ATCC 23769. The optimum concentration of each nutrient for the production of microbial cellulose was determined to be 10g peptone, 20g yeast extract, 5g glucose, 1.56g Na2HPO4, 1.8g KH2PO4, 0.05g MgSO4, 0.002g FeCl3, 5g citric acid and 10 mL ethanol per liter. With synergistic effects of citric acid and ethanol, cellulose productivity achieved in developed medium was 0.446 gram of cellulose per gram glucose for static culture, which is much higher than reported values. Cell growth and the cellulose production in the developed medium under static culture was also investigated.