• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2010

Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.18-24
• /
• 2000

The collection of PM10 samples were collected by a PM10 hi-vol. air sampler from June, 1998 through May, 1999 in Kunsan located at western coastal region of Korea. We obtained 84 samples during sampling period. Samples were analyzed to quantify the concentration of ionic and metallic components such as SO42-, NO3-, Cl-, NH4+, K+, Na+, Mg2+, Zn, Cd, Cr, Pb and Fe. Seasonal variations of the concentrations by wind directions of each component were studied. We found that PM10 concentration had the highest level in winter and the lowest level in summer. When the wind direction is from west to east, the concentration of most ionic and metallic species were higher compared to reverse direction. That implied the effect of air pollutants from industrial area. Also, substantial amount of Na+ and Cl- were observed, which was assumed to the effect from the sea.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.455-468
• /
• 2004

The purpose of this paper is to understand the time series and origin of a chemical component and to compare the difference during yellow sand episodes for analysis $PM_{10}$ chemical components in the region of west in Korean Peninsula, 1999-2001. An annual mean concentration of $PM_{10}$ is $29.1\;{\mu}g/m^3$. A monthly mean and standard deviation of $PM_{10}$ concentration are very high in spring but there is no remarkably seasonal variation. Also, water soluble ionic component of $PM_{10}$ be influenced by double more total anion than total cation, be included $NO_{3}^-\;and\;SO_{4}^{2-}$ for the source of acidity and $NH_{4}^+$ to neutralize. Tracer metals of $PM_{10}$ slowly increases caused by emitted for soil and ocean (Fe, Al, Ca, Mg, Na) and Zn, Pb, Cu, Mn for anthropogenic source. According to method of enrichment factor (E.F) and statistics, assuming that the origin of metal component in $PM_{10}$ most of element in the Earth's crust e.g. Mg, Ca, Fe originates soil and Cu, Zn, Cd, Pb derives from anthropogenic sources. The ionic component for $Na^{+}\;Cl^-,\;Mg^{2+}\;and\;Ca^{2+}$ and Mg, Al, Ca, Fe originated by soil component largely increase during yellow sand period and then tracer metal component as Pb, Cd, Zn decrease. According to factor analysis, the first group is ionic component ($Na^+,\;Mg^{2+},\;Ca^{2+}$) and metal component (Na, Fe, Mn and Ni) be influenced by soil. The second group, Mg, Cr also be influenced by soil particle.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.122-122
• /
• 2003

다슬기의 분말(PSB)과 그 회화분(ASB)으로부터 체내 흡수력이 높은 젖산칼슘의 제조조건과 색상, 용해도 및 관능적 품질을 조사하였다. PSB로부터 제조한 젖산칼슘(PSB-CL)의 PSB 및 젖산 100 mL에 대한 수율은 젖산농도가 10%일 때는 300% 및 15 g, 20%일 때는 260% 및 20 g이었으며, ASB로 제조한 젖산칼슘(ASB-CL)의 ASB 및 젖산 100 mL에 대한 수율은 10% 젖산에서는 400% 및 60 g, 20% 젖산에서는 329% 및 66 g으로 원료량을 기준으로 하였을 때는 다같이 젖산농도의 증가에 따라 감소하였으나 젖산의 부피를 기준으로 하였을 때는 젖산농도의 증가에 따라 증가하였다. Dehydated PSB-CL 및 ASB-CL 제조의 적정온도와 시간은 10$0^{\circ}C$에서는 각각 4 및 5시간, 12$0^{\circ}C$에서는 3 및 4시간, 15$0^{\circ}C$에서는 1 및 2시간으로 ASB-LA의 경우가 짧았다. IR 및 H-NMR spectrum의 분석결과 PBS-LA와 ASB-LA의 구조는 Ca($CH_3$CHOH$CO_2$)$_2$임이 확인되었다. 무수 PSB-CL 및 ASB-CL의 칼슘함량은 각각 15.4%(w/w)와 17.3%(w/w)로 이론 값의 각각 84.2%와 94.5%를 나타내었으며, 미량의 Fe, Na, Mn Zn을 함유하였다. PBS-CL와 ASB-CL의 색상은 각각 연한 황색과 연녹색을 지닌 백색을 띠었다. pH 3~8로 조정한 증류수에서 PSB-CL과 ASB-CL의 평균 용해도는 각각 5.43 g/100 mL 및 6.11 g/100 mL로 standard CL의 4.74 g/mL에 비하여 높았다. 국간장을 제외한 대부분의 액체식품(3% 소금물, 소주, 진간장, 국간장, 포도주스 및 오렌지주스)에서의 용해도는 PSB-CL(3.14~5.03 g/100 mL)과 ASB-CL(4.69~6.05 g/100 mL)이 standard CL(2.94~5.84 g/100 mL)에 비하여 높았다. 관능검사 결과, ASB-CL은 신맛이 낮아 사용범위가 높은 것으로 평가되었으며 PSB-CL는 쓴맛은 높으나 떫은맛이 낮고 구수한 맛이 강하여 식품에의 응용이 기대된다.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.131-137
• /
• 1996

This analysis has been conducted to get some basic data of the composition of culture solution mostly in inorganic ions, and water quality in hydroponic farms in Chollabuk - do. pH range was shown from 6.00 to 7.65 and the average was 6.58. EC range was shown from 0.01 to 0.94 mS/cm and the average was 0.28 mS/cm. Na concentration ranged from 4.71 to 145.44 ppm and Cl concentration ranged from 0 to 171.80 ppm were shown and their average were 24.24 ppm and 26.33 ppm, respectively. Na and Cl concentrations were higher as 7.7%, compared to those of other farms, which could cause the salt accumulation in the substrate mats. K, Ca and Mg concentrations were ranged from 0.93 to 17.38 ppm, 2.29 to 34.30 ppm and 0.70 to 18.61 ppm, respectively. Average concentrations were 3.06 ppm in K, 13.00 ppm in Ca and 4.91 ppm in Mg. 50, and PO$_4$ concentration ranged from 0.63 to 59.79 ppm and 0 to 4.28 ppm were shown and their average were 18.11 and 0.51 ppm. Cu concentration was ranged from 0 to 0.32 ppm and 0 to 6.22 ppm in Zn concentration. Their average were 0.02 ppm and 0.52ppm, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.96-101
• /
• 1988

It is important to assess the effects of ionic strength and type of anions when studying the adsorption of heavy metals on zeolite because the background salt may complex with heavy metals and compete for adsorption sites. This experiment was carried out to determine the effect of ionic strength and anion species($Cl^-$, $SO^{2-}\;_4$, and $ClO^-\;_4$) on heavy metal adsorption. Heavy metal adsorption by zeolite from solutions in the range of 10 to 50ppm was studied in the presence of NaCl, $Na_2SO_4$ and $NaClO_4$, with different concentrations. The ionic strength ranged from 0.01 to 1.00. Adsorption of heavy metal cations could be described by the Freundlich isotherm equation. Increasing the ionic strength of equilibrium solutions, the amounts of heavy metal adsorbed on the zeolite surfaces decreased in all three of the anion systems. This fact could be attributed to the competition of background salt cation and the decrease in initial activity of heavy metal cations. In the presence of Cl anion, less adsorption resulted than in the presence of $SO_4$ or $ClO_4$ anions of the same ionic strength, indicating the presence of uncharged and negatively charged complexes of heavy metal with Cl ligands.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.342-350
• /
• 1999

Photobacterium phosphoreum was used in order to study response to heavy metal including $HgCl_2$, $CdCl_2$, $MnSO_4$ and $ZnSO_4$ in view of developing monitoring system for toxic substances. The concentrations of heavy metal causing 50% reduction($EC_{50}$) in bioluminescence intensity were determined with both free and immobilized P. phosphoreum. The bioluminescence responses were examined at various concentrations of heavy metal after 10, 20 and 30 min of exposure. The linear correlation between Gamma values and concentrations of heavy metal was obtained and $EC_{50}$ was calculated from the linear correlation. The significant inhibitory concentrations for bioluminescence emission were found to be 0.05mg/L for $HgCl_2$, 25mg/L for $CdCl_2$, 50mg/L for $MnSO_4$ and 12.5mg/L for $ZnSO_4$, respectively. The free cell and disc type were shown to be more sensitive to heavy metal than cells mixed with Na-alginate or immobilized on Sr-alginate. However, the linear regression curves were derived from the Sr-alginate immobilized cells indicating the immobilization method is a useful tool for monitoring of heavy metal under more stable condition of bioluminescence.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.377-384
• /
• 2009

Among 27 Bacillus sp. isolated from Meju, a traditional Korean soybean fermented food, a strain MJ-226 was selected due to its strong fibrinolytic activity, and it was identified to be Bacillus subtilis MJ-226 according to morphological and biochemical characterization and sugar utilization. The fibrinolytic enzyme of B. subtilis MJ-226 was maximally produced by cultivating in the Tryptic Soy Broth (TSB) for 24~26 h at $37^{\circ}C$, and the enzymes activity was promoted with adding glucose, fructose, peptone or yeast extract to TSB. The fibrinolytic enzyme was stable at the range of pH from 6.0 to 8.0, and between 35 and $40^{\circ}C$. Also, when the crude enzyme was exposed to various metal ions and chemical inhibitors for 12 h, the enzyme stability was maintained by $MnSO_4$, $CaCl_2$, KCl, and NaCl. However, the stability was destroyed by treatment with $CuSO_4$, $MgSO_4$, $ZnSO_4$, $FeSO_4$, and $BaCl_2$, and the enzyme was unstable in the presence of chemical inhibitors such as iodoacetic acid, leupeptin, phenylmethanesulphonyl fluoride (PMSF), sodium dodecyl sulfate (SDS), thiourea, trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) and ethylenediaminetetraacetic acid (EDTA).

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.372-379
• /
• 2007

The microstructure, mechanical and electrochemical properties of plasma electrolytic coatings (PEO) coatings on Mg-4.3 wt%Zn-1.0 wt%Y and Mg-1.0 wt%Zn-2.0 wt%Y alloys prepared by gas atomization, followed by compaction at 320 for 10 min under the pressure of 700 MPa and sintering at 380 and 420 respectively for 24 h, were investigated, which was compared with the cast Mg-1.0 wt%Zn alloy. All coatings consisting of MgO and $Mg_2SiO_4$ oxides showed porous and coarse surface features with some volcano top-like pores distributed disorderly and cracks between pores. In particular, the surface of coatings on Mg-1.0 wt%Zn-2.0 wt%Y alloy showed smaller area of pores and cracks compared to the Mg-4.3 wt%Zn-1.0 wt%Y and Mg-1.0 wt%Zn alloys. The cross section micro-hardness of coatings on the gas atomized Mg-Zn-Y alloys was higher than that on the cast Mg-1.0 wt%Zn alloy. Additionally, the coated Mg-1.0 wt%Zn-2.0 wt%Y alloy exhibited the best corrosion resistance in 3.5%NaCl solution. It could be concluded that the addition of Y has a beneficial effect on the formation of protective and hard coatings on Mg alloys by plasma electrolytic oxidation treatment.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.150-155
• /
• 1997

Powder type electroluminescent device(P-ELD) in this study was prepared by printing method. P-ELDs were basically composed of phosphor, insulator and transparent conducting layer. The phosphor powder was prepared by sintering the mixture of ZnS as a host, Cu as an activator, and NaCl as a flux for co-activator and enhancement of growth of the phosphor particles. The phosphor layer was made by printing the paste of the cyanoethylpullan as a binder and the ZnS system phosphor powder. In order to evaluate the luminescence characteristics of ZnS P-ELD, applied voltage - luminance(V-L), frequency-luminance(f-L), and relative luminance spectra(L- .lambda.) characteristics were measured. The experimental results show that luminance increased with increasing the applied voltage and frequency. It can be explained in terms of the potential barrier formed between ZnS and CuS. Two emission peaks in luminance-wavelength spectra measured at applied voltage of 100 $V_{rms}$ were observed at 500nm as a primary peak and 460nm as a secondary peak, respectively.y.