• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.2
• /
• pp.95-102
• /
• 2001

Hafnium oxide thin films for gate dielectric were deposited at $300^{\circ}C$ on p-type Si (100) substrates by plasma enhanced chemical vapor deposition (PECVD) and annealed in $O_2$ and $N_2$ ambient at various temperatures. The effect of hydrogen treatment in 4% $H_2$ at $350^{\circ}C$ for 30 min on the electrical properties of $HfO_2$for gate dielectric was investigated. The flat-band voltage shifts of $HfO_2$capacitors annealed in $O_2$ambient are larger than those in $N_2$ambient because samples annealed in high oxygen partial pressure produces the effective negative charges in films. The oxygen loss in $HfO_2$films was expected in forming gas annealed samples and decreased the excessive oxygen contents in films as-deposited and annealed in $O_2$ or $N_2$ambient. The CET of films after hydrogen forming gas anneal almost did not vary compared with that before hydrogen gas anneal. Hysteresis of $HfO_2$films abruptly decreased by hydrogen forming gas anneal because hysteresis in C-V characteristics depends on the bulk effect rather than $HfO_2$/Si interface. The lower trap densities of films annealed in $O_2$ambient than those in $N_2$were due to the composition of interfacial layer becoming closer to $SiO_2$with increasing oxygen partial pressure. Hydrogen forming gas anneal at $350^{\circ}C$ for samples annealed at various temperatures in $O_2$and $N_2$ambient plays critical role in decreasing interface trap densities at the Si/$SiO_2$ interface. However, effect of forming gas anneal was almost disappeared for samples annealed at high temperature (about $800^{\circ}C$) in $O_2$ or $N_2$ambient.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.397-410
• /
• 1997

An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.166-168
• /
• 2006

$Si_3N_4/SiC$ composite ceramics was sintered in order to investigate their bending strength behavior after crack healing. $Y_2O_$ and $TiO_2$ power was added as sintering additives to enhance it's sintering property. A three-point bending specimen was cut out from sintered plates. About $100\;{\mu}m$ semi-circular surface cracks were made on the center of the tension surface of the three-point bending specimen using Vickers indenter. After the crack-healing processing from $500^{\circ}C$ to $1300^{\circ}C$, for 1 h, in air, the bending strength behavior of these crack-healed specimen coated with $SiO_2$ colloidal were determined systematically at room temperature. $Si_3N_4/SiC$ ceramics using additive powder ($Y_2O_3+TiO_2$) was superior to that of additive powder $Y_2O_3$. The additive powder $TiO_2$ exerted influence at growth of $Si_3N_4$. The optimum crack healing conditions coated $SiO_2$ colloidal were $1000^{\circ}C$ at $Si_3N_4/SiC$ using additive powder ($Y_2O_3+TiO_2$), and $1300^{\circ}C$ at $Si_3N_4/SiC$ using additive powder $Y_2O_3$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1115-1121
• /
• 2007

[ $Bi_2Sr_2Ca{_{n-1}}Cu_nO_x$ ](n=0,1,2) thin fans have been fabricated by co-deposition at an ultra-low growth rate using ion beam sputtering(IBS) method. Bi 2212 phase appeared in the temperature range of 750 and $795^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785^{\circ}C$. Whereas, $PO_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about 90 K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $CaCuO_2$ was observed in all of the obtained films.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.179-183
• /
• 2013

The half-metallicity and magnetism for compounds of the $N_{(2-0.5n)}O_{0.5}nKCa$ (n = 0~4), which was based on the $d^0$ Heusler half-metals of $N_2KCa$ and $O_2KCa$, were investigated by means of first-principles band calculation method. From the calculated total magnetic moments and the density of states, we found that these three compounds have the half-metallicity. The magnetic moments of the N and O atoms in these compounds were considerably increased compared to those of pure $N_2KCa$ and $O_2KCa$. The K atoms have a large negative magnetic moments. The relationship between the value of magnetic moments for each atom and density of states are discussed.

• Journal of Sensor Science and Technology
• /
• v.7 no.3
• /
• pp.147-153
• /
• 1998

The strain characteristics of a fiber optic Fabry-Perot pressure sensor with high sensitivity using a $Si_{3}N_{4}/SiO_{2}/Si_{3}N_{4}$ (N/O/N) diaphragm is experimentally investigated. A 600 nm thick N/O/N diaphragm was fabricated by silicon anisotropic etching technology in 44 wt% KOH solution. An interferometric fiber optic pressure sensor has been manufactured by using a fiber optic Fabry-Perot intereferometer and a N/O/N diaphragm. The 2 cm length fiber optic Fabry-Perot interferometers in the continuous length of single mode fiber were produced with two pieces of single mode fiber coated with $TiO_{2}$ dielectric film utilizing the fusion splicing technique. The one end of the fiber optic Fabry-Perot interferometer was bonded to a N/O/N diaphragm. and the other end was connected to an optical setup through a 3 dB coupler. For the N/O/N diaphragm sized $2{\times}2\;mm^{2}$ and $8{\times}8\;mm^{2}$, the pressure sensitivity was measured 0.11 rad/kPa and 1.57 rad/kPa, respectively, and both of the nonlinearities were less than 0.2% FS.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.917-929
• /
• 2019

Denitrification in streams is of great importance because it is essential for amelioration of water quality and accurate estimation of $N_2O$ budgets. Denitrification is a major biological source or sink of $N_2O$, an important greenhouse gas, which is a multi-step respiratory process that converts nitrate ($NO_3{^-}$) to gaseous forms of nitrogen ($N_2$ or $N_2O$). In aquatic ecosystems, the complex interactions of water flooding condition, substrate supply, hydrodynamic and biogeochemical properties modulate the extent of multi-step reactions required for $N_2O$ flux. Although water flow in streambed and residence time affect reaction output, effects of a complex interaction of hydrodynamic, geomorphology and biogeochemical controls on the magnitude of denitrification in streams are still illusive. In this work, we built a two-dimensional water flow channel and measured $N_2O$ flux from channel sediment with different bed geomorphology by using static closed chambers. Two independent experiments were conducted with identical flume and geomorphology but sediment with differences in dissolved organic carbon (DOC). The experiment flume was a circulation channel through which the effluent flows back, and the size of it was $37m{\times}1.2m{\times}1m$. Five days before the experiment began, urea fertilizer (46% N) was added to sediment with the rate of $0.5kg\;N/m^2$. A sand dune (1 m length and 0.15 m height) was made at the middle of channel to simulate variations in microtopography. In high- DOC experiment, $N_2O$ flux increases in the direction of flow, while the highest flux ($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$) was measured in the slope on the back side of the sand dune. followed by decreases afterward. In contrast, low DOC sediment did not show the geomorphological variations. We found that even though topographic variation influenced $N_2O$ flux and chemical properties, this effect is highly constrained by carbon availability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.880-885
• /
• 2010

Importance of climate change and its impact on agriculture and environment has increased with a rise of greenhouse gases (GHGs) concentration in Earth's atmosphere. Nitrous oxide ($N_2O$) emission in upland fields were assessed in terms of emissions and their control at the experimental plots of National Academy of Agricultural Science (NAAS), Rural Development Administration (RDA) located in Suwon city. It was evaluated $N_2O$ emissions at different soil water content, soil temperature, and mineral N conditions in a upland cultivating red pepper and soy bean. The results were as follows: 1) There were significant correlation between amount of $N_2O$ emissions and soil temperature, soil water content and mineral N conditions showed $0.528^{**}$, $0.790^{***}$ and $0.937^{***}$ in red pepper field and $0.658^{***}$, $0.710^{***}$ and $0.865^{***}$ in soybean field, respectively. 2) From the contribution rate analysis as to contribution factors for $N_2O$ emission, it appeared that contribution rate was in the order of mineral N (71.9%), soil moisture content (23.6%), and soil temperature (4.5%) in pepper field and mineral N (65.5%), soil moisture contents (19.2%), and soil temperature (15.2%) in soybean field.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.267-271
• /
• 2009

The Marine Environment Protection Committee(MEPC) which is the IMO's specialized committee on marine pollution related matters deals with GHG related issues to discuss and compile possible approaches on technical, operational and market based measures to address GHG emissions from ships. The nitrous oxide($N_2O$) which remains generally in the atmosphere for around 114 years is one of the green house gases. The global warming potential of $N_2O$ is 310 times than $CO_2$ in the given period 100 years. It seems that the $N_2O$ formation is influenced by the nitrogen compound contained in the fuel which is named as "Fuel N" during the combustion process or the NOx, SOx and $H_2O$ through the emission gases before exhausted into the atmosphere. This paper has carried out an experimental study of the $N_2O$ concentration profiles by the change of $NH_3$ flows in the planner premixed combustion with using $C_3H_8$ and air.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.184-188
• /
• 2002

Unsaturated $Cr(CO)_x(1{\leq}x{\leq}5)$molecules were generated in the gas phase from photolysis of $Cr(CO)_6$vapor in He using an unfocussed weak UV laser pulse and their reactions with $O_2$ and $N_2O$ have been studied. The formation and disappearance of the ground state CrO molecules were identified by monitoring laser-induced fluorescence(LIF) intensities vs delay time between the photolysis and probe pulses. The photolysis laser power dependence as well as the delay time dependence of LIF intensities from the CrO orange system showed different behavior as those from ground state Cr atoms, suggesting that the ground state CrO molecules were generated from the reaction between $O_2/N_2O$ and photo-fragments of $Cr(CO)_6$ by one photon absorption. The depletion rate constants for the ground state CrO by $O_2$ and $N_2O$ are $5.4{\pm}0.2{\times}10^{-11}$ and $6.5{\pm}0.4{\times}10^{-12}cm^3molecule^{-1}s^{-1}$, respectively.