• 한국농공학회지
• /
• 제19권1호
• /
• pp.4279-4295
• /
• 1977

Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka＋Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

• Tuberculosis and Respiratory Diseases
• /
• 제48권5호
• /
• pp.766-772
• /
• 2000

배경 : 압력조절환기법(pressure control ventilation mode, PCV)에서 설정된 기도압의 달성은 기도저항이 일정한 조건에서 초기 흡기 유량 (inspiratory flow)에 의해 결정되며 압력상승시간(pressure rise time) 조절은 이 흡기 유량을 변동시킨다. 압력조절환기법에서 흡기 일환기량은 흡기 시간과 흡기 시간내 평균 흡기 유량에 따라 결정되므로 압력 도달 시간을 짧게 하면 초기 유량이 많아지게 되고 따라서 흡기되는 용적이 증가할 것으로 예상된다. 본 연구는 압력조절환기 법에서 압력상승시간을 줄이는 것이 흡기 일환기량 및 가스교환을 호전시키는지 알아보고자 하였다. 방법 : 호흡부전으로 기계호흡 중인 환자 13명(58$\pm$16세, 남 : 여=7 : 6)에서 Servo 300 (Simens-Elema, Solna, Sweden) 상의 압력상승시간 10%. 5% 및 30분 간 씩 적용하고 동맥혈 검사, 혈역동학적 지표(혈압, 분당맥박수) 및 호흡 지표(일회 호흡량, 최대 흡기유량, 최대 흡기압, 평균 기도압, 기도저항, 탄성도, 호기말 이산화탄소, 동맥혈가스)를 측정하였다. 결과 : 1) 압력상승시간이 10%, 5%, 0%로 변경시 일회 호흡량은 425$\pm$94 ml, 439$\pm$101 ml, 456$\pm$106ml로 증가되었다(p<0.001). 압력상승시간 단축에 따라 평균기도압 역시 증가되었다(각각 11.2$\pm$3.7cm $H_2O$, 12.0$\pm$3.7 cm $H_2O$, 12.5$\pm$3.8 cm $H_2O$; p<0.001). 2) pH는 10% 와 5% 보다 0%에서 높았으며(각각 7.40$\pm$0.08, 7.40$\pm$0.92, 7.41$\pm$0.96 ; p<0.0), $PaCO_2$도 10%와 5%에서 보다 0%에서 낮았다(각각 47.4$\pm$15.8 mm Hg, 47.2$\pm$15.7 mm Hg, 44.6$\pm$16.2 mm Hg ; p<0.01). 결론 : 압력조절환기법에서 압력상승시간의 단축은 일환기량과 평균기도압을 증가시키고, 동맥혈이산화탄소분압 저하 및 이에 따른 pH 상승 효과가 있었다. 압력조절 환기법에서 압력상승시간은 일환기량을 조절할 수 있는 한 변수로 사료된다.

• 한국동물위생학회지
• /
• 제25권1호
• /
• pp.53-73
• /
• 2002

It has been reported that degranulation of mast cells in rats, rabbits and dog was observed after dosing xylazine hydrochloride(Xh) which has been widely used as sedative, analgesic and muscular relaxant. Therefore, this experiment was conducted to examine the relations between Xh and histamine release and to identify the action of ${\alpha}$-adrenoceptors which exists on the suface of mast cells. 1. The content of histamine within serum was measured with HPLC by performing the O-phthalaldehyde(OPA) fluorescent derivation. The pretreatment method had a little modification from the conventional method. The pretreament was carried out in the following method. 0.2$m\ell$ of serum and 1$m\ell$ of butanol were added to mixed together and then the liquid was centrifugally separated at 4$^{\circ}C$ and 2,000 rpm for 3 minutes. 0.4$m\ell$ of 0.1N HCl and 1.6$m\ell$ of heptane were added to 0.8$m\ell$ of supernatant taken from the liquid, and they were mixed together. This mixture was also centrifugally separated at 4$^{\circ}C$ and 2,000 rpm for 5 minutes. The supernatant was thrown away and the OPA fluorescent derivation was carried out with 0.2$m\ell$ of the lower liquid then, 5 minutes after mixing 400${\mu}\ell$ of 0.1N HCl, 120${\mu}\ell$ of 1N NaOH and 40${\mu}\ell$ of 0.1% OPA in the 0.2$m\ell$ of the lower liquid,120${\mu}\ell$ of 3.57N H$_3$PO$_4$ was added to the mixed liquid, and the liquid, was mixed again and syringe-filtered. Then, the measurement was done with HPLC in the 30 : 70(ν/ν) ratio of 0.004M KH$_2$PO$_4$: CH$_3$CN, flow rate of 1.0$m\ell$/min., and a wavelength of λex= 350nm and λem=444nm at the column temperature of 27$^{\circ}C$, using the fluorescence detector. 2. The content of histamine in each laboratory animal appeared to be higher in such an order as rabbit, rat, guinea pig, dog, Korean indigenous goat, swine, Korean indigenous cattle, Holstein, and mouse, of which the individual mean values${\pm}$standard deviation were 2.0668 ${\pm}$ 0.6049. 0.4999 ${\pm}$ 0.2278, 0.4241 ${\pm}$ 0.1974, 0.1054 ${\pm}$ 0.0556, 0.1028 ${\pm}$ 0.0276, 0.0972 ${\pm}$ 0.0513, 0.0872 ${\pm}$ 0.0373, 0.0717 ${\pm}$ 0.0379, and 0.0706 ${\pm}$ 0.0366, respectively. 3. The content of histamine was measured at the moments of 15-, 30-, 60-, 120-minutes after inoamuscular injection of 20mg/100kg Xh into two to 4 years old Holstein weighing 600∼700kg. The result showed that there was a significant increase at the times of 30- and 90-minutes after injection(p<0.05). 4. Intramuscular injection of 3mg/10kg Xh was given to crossbred pug dogs weighing 2.5∼4.3kg. The content of histamine was measured at the times of 30-, 60-, 90- and 120-minutes after injection. The result revealed that there was a significant increase at the times of 60-and 90-minutes after injection(p<0.05). 5. Intramuscular injection of 10mg/$m\ell$∼25mg/$m\ell$ Xh in concentration of 0.1$m\ell$ was applied to Korean indigenous goat over 5 months old. Then, the content of histamine was measured at the times of 15-, 30-, 60- and 90-minutes after injection. A significant increase was shown at the times of 30- and 60-minutes after injection(p<0.05). 6. The content of histamine was measured at the moments of 30- and 60-minutes after intramuscular injection of 0.1-0.2$m\ell$ Xh (20mg/$m\ell$) into male rabbits weighting 2.5-4kg. A significant increase was found at the moment of 60 minutes after injection(p<0.001). 7. After administering Xh to the mast cell taken from the abdominal cavity of mouse, the content of histamine was measured. The result showed that the higher the concentration, the more significantly the content of histamine was increased(p<0.05). 8. Compound 48/80 was administered in concentration of 5$\mu\textrm{g}$/$m\ell$ and 10$\mu\textrm{g}$/$m\ell$ to the mast cell picked from the abdominal cavity of mouse. The result showed that there was a significant increase in the content of histamine in case of the concentration of 10$\mu\textrm{g}$/$m\ell$(p<0.05). It was found to be about 10,000 to 500,000 times stronger than the Xh. 9. After premedication of 1mg/kg of yohimbine hydrochloride as ${\alpha}$$_2$-adrenergic antagonist to rabbits, the Xh was administered to them. The result was that the value of histamine within serum was decreased significantly(p<0.001). 10. After premeditation of 1mg/kg of prazosin hydrochloride as ${\alpha}$$_1$-adrenergic antagonist to rabbits, the Xh was administered to them. It was found that the value of histamine within serum was decreased significantly(p<0.005). 11, Prazosin hydrochloride and yohimbine hydrochloride as ${\alpha}$$_1$-adrenergic antagonist, respectively, and ${\alpha}$$_2$-adrenergic antagonist were administerd. In this case, the value of histamine within serum was decreased significantly(p<0.0001). As the results, when the Xh is administered to various kinds of animals, the amount of histamine release within serum is increased. In view of the results so far achieved, it is concluded that Xh acted on both a$_1$-adrenoreceptor and ${\alpha}$$_2$-adrenoreceptor induces the degranulation of mast cell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.

• 원예과학기술지
• /
• 제29권4호
• /
• pp.311-316
• /
• 2011

본 연구는 고추냉이 '달마' 품종을 배양액의 EC 수준을 달리하여 수경재배하였을 때, 기능성 성분인 AITC의 조직별 함량, 비타민 C 함량 및 생리적 반응들에 미치는 영향을 구명하고자 하였다. 배양액의 EC는 Yamasaki 배양액 EC $0.5dS{\cdot}m^{-1}$를 기준으로 1N-NaCl로 조절한 5수준(EC 0.5, 1, 2, 3, $5dS{\cdot}m^{-1}$)으로 5주간 담액 수경재배하였다. 고추냉이의 총 AITC 함량은 처리 1주에는 EC $5dS{\cdot}m^{-1}$에서, 처리 5주에는 EC $3dS{\cdot}m^{-1}$에서 가장 높았다. 처리 5주 후 고추냉이 AITC 함량은 처리 1주에 비하여 EC 0.5-$2dS{\cdot}m^{-1}$에서 1.2-1.4배 증가하였으나, EC $3dS{\cdot}m^{-1}$에서는 6%, EC $5dS{\cdot}m^{-1}$에서는 56% 감소하였다. AITC의 상대적 비율이 EC 0.5-$2dS{\cdot}m^{-1}$에서는 처리 1주와 처리 5주 모두 엽신과 뿌리에 비해 엽병(평균 53.4%, 49.5-61.1%)에서 높았다. 그러나 EC 3과 EC $5dS{\cdot}m^{-1}$에서 뿌리의 AITC 상대적 비율이 처리 1주에는 평균 45.1%(43.7-46.1%)로 엽신과 엽병에 비해 높은 반면 처리 5주에는 평균 16.6%(16.0-17.1%)로 낮아져, 엽신에서는 5배, 뿌리에서는 6.8배의 AITC 함량이 감소하였다. 처리 1주 비타민 C 함량은 83.7-$107mg{\cdot}100g^{-1}FW$로 처리에 따른 차이가 없었으나, 처리 5주 후, EC 0.5-$2dS{\cdot}m^{-1}$에서는 117.8-$137.5mg{\cdot}100g^{-1}FW$로 27% 증가하였다. 고추냉이 잎 전해질 유출은 EC $5dS{\cdot}m^{-1}$에서 EC 0.5-$2dS{\cdot}m^{-1}$에 비해 3배 증가하였다. 그러나 엽록소 함량, 광합성 및 증산율은 EC $2dS{\cdot}m^{-1}$ 이상에서, 수분함량과 비엽면적은 EC $5dS{\cdot}m^{-1}$에서 감소하였다. 처리 5주 후 고추냉이 생육은 EC 3과 $5dS{\cdot}m^{-1}$에서 엽수와 지상부 생체중이 감소하였다. 이상의 결과, 기능성 채소로서 고추냉이 수경재배시 품질과 생육을 유지하기 위한 적정 배양액의 EC는 $3dS{\cdot}m^{-1}$ 이하가 적합하리라 판단된다.

• Journal of Chest Surgery
• /
• 제30권6호
• /
• pp.591-597
• /
• 1997

개심술시 사용되는 체외순환에 따른 혈액희석, 염증성반응 등으로 인하여 개심술후 혈관외용적 증가 및 조직내 수분증가로 인하며 심장 및 폐기능 저하는 잘 알려진 사실이며 특히 소아에서는 심한 경우에는 장 기부전이 초래 될 수 있다. 본 연구는 여러가지 장점을 갖고 있는 변형초여과법을 임상적용하여 개심술 직 후 심폐기능에 미치는 영향을 평가하고자 하였다. 연구 A): 1996년 4월부터 1996년 8월 까지 삼성의료원 흉부외과에서 변형초여과법을 실시한 총 71명의 환자중 전향적연구을 실시한 소아환자 26명을 대상으로 하여 변형초여과법전후의 혈역학적 수치를 비교하 였다. 변형초여과법 전후의 .적혈구 용적량은 28.3$\pm$3.6%에서 33.8$\pm$4.0%로 증가 (P<0.001), 중심정맥압은 7.8 k3.7mmHg에서 6.9$\pm$2.gmmHg로 감소하였으며(PfO.001), 수축기 혈압은 66.7$\pm$11.2mmH프에서 76.2 11.8 mmHg로 증가하였다( p < 0.02). 연구 B): 변형초여과법이 폐에 미치는영향을 평가하기 위하여 2세 미만의 심실중격결손 환자중 변형초여 과법군(12명)과 초여과법을 적용하지 않은 대조군(14명)으로 하여 수술직후 최대호기압, 폐포-모세혈관 산소 분압차, 기관지 삽관기\ulcorner 등을 비교하였다. 최대호기압은 각각 20.0$\pm$2.4cm1120,22.4$\pm$2.3cm1120로 변형초여 과법군이 의미 있게 낮았으며(p<0.03), 폐포-모세혈관 산소분압차 및 기관지 상관기간은 변형초여과법 적용 군에서 낮았으나, 통계적으로 유의한 차이는 없었다. 상기연구를 통하여 변형초여과법을 사용함으써 효과적으로 혈액을 농축시킬수 있으며, 더 낮은 중심정맥 암에서 더 높은 수축기 혈압 등의 혈역학적 이득이 있으며, 술후 폐포-모세혈관 산소분압차 및 최대호기압 의 감소 등, 폐기능 향상의 효과가 있음을 알 수 있었다. 본 연구팀은 향후 계속적으로 소아 개심술후 변 형초여과법을 적용하여 이에 대한 효과.및 기전에 대한 연구를 계속시행할 예정이다.

• Journal of Chest Surgery
• /
• 제35권6호
• /
• pp.420-429
• /
• 2002

심장수술시 체외순환은 저체온 기법으로 실시되지만 최근의 동향은 정상체온 체외순환 기법을 사용하려는 경향이 늘고 있다. 그러나 심장수술 동안 뇌 대사에 대한 정상 체온 체외순환의 임상적 유용성이나 안전성은 아직 완전히 이해되거나 확립되지 않은 상태이다. 저자들은 심장수술 동안 뇌 대사에 대한 정상 체온 체외순환 기법과 중등도 저체온 체외순환 기법의 영향을 비교 평가하기 위해 전향적 연구를 시행하게 되었다. 대상 및 방법: 36명의 성인 심장수술 환자들은 연구목적에 따라 정상 체온 체외순환군(이하 정상체온군, 비인두 온도＞34.5$^{\circ}C$, n=18)과 중등도 저 체온 체외순환군(이하 저체온군, 비인두 온도 29~3$0^{\circ}C$, n=18)으로 한 뒤 비박동성 체외순환을 실시하였다. 전체 환자들에 대해 중대뇌 동맥 뇌혈류 속도(뇌혈류 속도), 뇌동정맥 산소 함량차, 뇌산소 추출률, 수정 뇌산소 대사율, 뇌산소 운반율, 뇌정맥 산소 불포화도(내경 정맥구 혈액 산소포화도$\leq$50%), 기타 동맥 및 내경 정맥구 혈액의 가스분석 등을 체외순환 전(기준치), 체외순환-10분, 재가온-1기(저체온군의 비인두 온도 34$^{\circ}C$때), 재가온-2기(양 그룹의 비인두 온도 37$^{\circ}C$때), 체외순환 종료 직후, 흉부 피부 봉합기 때 측정하였다. 수술 후 신경학적 합병증 역시 관찰하였으며, 전술한 모든 변수들을 양 그룹간에 비교 분석하였다. 결과： 뇌혈류 속도는 재가온­2 때 저체온군(153.11$\pm$8.98 %)이 정상체온군(131.18$\pm$6.94 %) 보다 유의하게 높았다(p＜0.05). 체외순환 10분 때의 뇌동정맥 산소함량차(3.47$\pm$0.21 vs 4.28$\pm$0.29 mL/dL, p＜0.05), 뇌산소 추출률(0.30$\pm$0.02 vs 0.39$\pm$0.02, p＜0.05), 그리고 뇌산소 대사율(4.71$\pm$0.42 vs 5.36$\pm$0.45, p＜0.05)은 저체온군이 정상체온군 보다 유의하게 낮았다. 뇌산소 운반율은 저체온군이 정상체온군 보다 체외순환 10분(1,527.60$\pm$25.84 vs 1,368.74$\pm$20.03, p＜0.05), 재가온-2기(1,757.50$\pm$32.30 vs 1,478.60$\pm$27.41, p<0.05), 흉부 피부봉합기 때(1,734.37$\pm$41.45 vs 1,597.68$\pm$27.50, p＜0.05) 유의하게 더 높았다. 체외순환 10분 때 내경 정맥구의 산소분압(40.96$\pm$1.16 vs 34.79$\pm$2.18 mmHg, p＜0.05), 산소포화도(72.63$\pm$2.68 vs 64.76$\pm$2.49 %, p＜0.05), 그리고 산소함량(8.08$\pm$0.34 vs 6.78$\pm$0.43 mL/dL, p＜0.05)은 저체온군이 정상체온군 보다 유의하게 더 높았다. 수술 후 신경학적 합병증(섬망) 발생 환자 수는 저체온군이 정상체온군 보다 유의하게 적었고(2 명 vs 4 명, p＜0.05) 섬망증세의 지속시간 역시 저체온군이 정상체온군 보다 훨씬 짧았다(60 시간 vs 160 시간, p＜0.01). 결론: 이상의 연구 결과들을 볼 때 정상 체온 체외순환 기법은 고령환자나 장시간 수술환자에 있어 일상적 방법으로 적용하기에 문제가 있을 것 같으며 중등도 저체온 체외순환이 정상 체온 체외순환보다 뇌대사 및 수술 후 신경학적 결과에 더 바람직 할 것으로 판단된다.

• 유기물자원화
• /
• 제14권4호
• /
• pp.113-120
• /
• 2006

음식물류 폐기물 자원화과정에서 발생하는 폐수는 BOD 20,000~150,000mg/L이며, 매립금지로 적정수준까지 처리되어야 한다. 그러나 기존의 폐수처리시설에 의해서는 10일 이하로 처리하기가 불가능하다. (주)에코데이는 높은 산소전달효율, 높은 미생물(MLVSS) 유지와 유기물 농도 모두가 상향류의 PFR흐름을 갖는 ER-1 반응기를 이용하여 2~4일 이내로 처리할 수 있는 기술을 개발하였다. 하루 20톤의 음식물을 퇴비화 하는 H군 음식물 자원화시설에 Pilot plant를 설치하고, 자원화 과정에서 발생하는 고농도폐수(평균 BOD 64,431mg/L)와 저농도폐수(평균 BOD 16,500mg/L)에 대해 6개월간 실험하였다. 저농도폐수의 처리를 위해서 ER-1(HRT 2.5d)과 후단에 고도처리공정을 적용하였으며, 이때 전체공정에서 제거되는 유기물의 대부분이 ER-1을 통해 제거되었다. 저농도폐수 Pilot plant의 처리효율은 BOD 99%, COD 98%, SS 99%, T-N 97%, T-P 96%이다. 고농도 폐수 처리공정은 ER-1을 직렬로 배치하여 2단계 ER-1(1차 HRT 2.5d, 2차 HRT 1.5d) 후 고액분리를 통해 하수연계(BOD 2,000mg/L 이하)로 계획하였다. Pilot 실험결과 고농도 폐수에 대해서도 BOD 97%, COD 84%, SS 98%, T-N 66%, T-P 95%의 안정적인 처리효율을 얻을 수 있었다. 고농도 폐수처리시에 생물반응기의 냉각시설 없이 고온($50^{\circ}C$)으로 운전되었으나, 온도 조절 부분을 개선한다면 더 높은 효율을 기대할 수 있을 것으로 판단된다.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.179-189
• /
• 2006

High velocity oxygen fuel(HVOF) thermal spray coating of WC-Co powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen and the brittleness of ceramics coating. WC-Co micron and nano powder were coated by HVOF thermal spraying method for the study of durability improvement of the high speed spindle. Coatings were planned by Taguchi program for the four spray parameters of spray distance, flow rates of hydrogen, oxygen and powder feed rate. Optimal coating process was obtained by the studies of coating properties such as porosity, surface roughness, micro hardness, and micro structure. WC-Co micron and nano powder were coated on the Inconel 718 substrate by the optimal coating process obtained in this study. The wear behaviors were studied by the sliding wear tester at room temperature and at an elevated temperature of $500^{\circ}C$ for the application to high speed spindle. Sliding wear test was carried out for four most promising hard coatings of chrome coating, ceramics coatings such as $A1_2O_3,\;Cr_2O_3$ and HVOF Co-alloy T800 for the comparison of their wear behaviors. HVOF WC-Co coating was better than other coatings showing highest micro hardness of 1400 Hv and comparable friction coefficients with others. HVOF WC-Co coating is a strong candidate for the replacement of the traditional hard chrome plating for the high speed spindle.

• 청정기술
• /
• 제12권2호
• /
• pp.67-77
• /
• 2006

본 연구에서 소규모 하수고도처리를 위한 이중슬러지(Dual sludge) $KNR^{(R)}$ (Kwon's nutrient removal) 시스템이 개발되었다. $KNR^{(R)}$ 시스템은 부유성장식 탈질미생물과 부착성장식 질산화미생물을 분리시킨 이중슬러지 공정으로 최초침전조, 혐기조, 무산소조, 농축조의 복합기능을 수행하는 UMBR (Upflow multi-layer bioreactor)과 펠렛형 담체가 충진된 호기성 담체조로 구성되어 있다. 소규모 하수처리시 본 개발공정의 안정성과 처리성능을 평가하기 위해 처리용량 $50m^3/d$ 규모의 파일럿 플랜트를 고도처리 공정으로 개선공사 중인 처리용량 $50m^3/d$ 규모의 실제 소규모 마을하수처리장에 적용하였다. UMBR과 담체조의 체류시간은 각각 4.7 h와 7.2h이었으며, 반응조 수온은 $18.1{\sim}28.1^{\circ}C$이었다. 유입 하수량과 유입수의 BOD/N의 변동폭이 컸음에도 불구하고 파일럿 플랜트는 안정된 처리성능을 보였다. 전체 실험기간 중 처리수의 $COD_{cr}$, $COD_{Mn}$, $BOD_5$, TN, TP의 평균 농도는 11.0 mg/L, 8.8 mg/L, 4.2 mg/L, 3.5 mg/L, 9.8 mg/L, 0.87/0.17 mg/L (poly aluminium chloride(PAC) 투입/미투입)이었으며, 제거율을 각각 95.3%, 87.6%, 96.3%, 96.5%, 68.2%, 55.4/90.3% 이었다. 잉여슬러지 발생량은 $A_2O$와 Bardenpho 등과 같은 단일슬러지를 이용하는 고도처리공정과 비교시 약 1.9~3.8배 낮은 $0.026kg-DS/m^3$ and 0.220 kg-DS/kg-BOD로 나타났다.