• 제목/요약/키워드: $NO_x$ gas

검색결과 562건 처리시간 0.024초

선박용 가스엔진의 NOx 배출량예측에 관한 연구 (Prediction of NOx emission for marine gas engines)

  • 장하식;이지웅;이강기;최재성
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권6호
    • /
    • pp.658-665
    • /
    • 2014
  • 선박용 디젤엔진에서 천연가스의 사용기술은 NOx, SOx 및 GHG의 배출을 단독으로 크게 삭감할 수 있는 기술이다. 특히 셰일가스의 등장으로 가스의 공급이 확대될 것으로 예상되는 가운데 추진기관용 2행정기관에의 이용이 적극적으로 개발 검토되고 있다. 가스엔진의 출력성능은 디젤기관과 비교하여 큰 차이를 보이지 않았으며 연료소비율은 약간 개선되는 것으로 보고되고 있다. 그러나 배기특성에 있어서는 연소기술에 따라서 다른 성능을 나타내고 있으며 희박연소기술에 의하여 NOx 배출량은 85%정도의 감축이 가능한 것으로 알려져 있다. 본 연구에서는 가스엔진의 연소생성물의 발생량을 시뮬레이션 할 수 있는 프로그램을 개발하였다. 개발된 프로그램은 희박연소의 영향은 물론 예혼합연소와 확산연소에 의한 영향도 시뮬레이션 할 수 있는 기능을 가지고 있다. 이를 위해서 실린더 내 상태변화는 2영역모델(Two-zone model)을 이용하고 열발생율 패턴은 Wiebe 함수를 이용하며, 공연비를 입력데이터로 하여 다양한 연소조건에서의 배기생성물의 발생량 예측을 가능하게 하였다.

연소계 및 연료분사계의 구성인자가 디젤엔진의 성능 및 배기 배출물에 미치는 영향 (Effects of Parameters of Combustion and Fuel Injection System on Performance and Exhaust Emissions in a Diesel Engine)

  • 이준
    • 한국자동차공학회논문집
    • /
    • 제14권2호
    • /
    • pp.166-173
    • /
    • 2006
  • This study investigates a heavy duty diesel engine with swept vol. 12.6L, 4cycle-OHC type to verify the effects of the performance and exhaust gas emission according to the variable specifications of both swirl ratio and flow coefficient in inlet port, combustion bowl and fuel injection system. To meet the high BMEP and stringent exhaust emission standard, a turbocharger with wastegate and an intercooler were installed in the engine. Helical port, major design parameters for combustion chamber and electronic fuel injection pump with 1,000bar were reviewed and applied. Confirmation tests were also performed to meet the target value, $NO_x$ 5.0g/kWh and PM 0.1g/kWh of Euro3 exhaust emission legislation. The results of this study show that not only is it effective to use a relatively bigger bowl size for controlling rapid burning condition due to the decreased in-bowl swirl, but also to use a concave cam with double injection rates to decrease $NO_x$.

An Experiment of SCR System On-board Ship

  • Choi Jae-Sung;Cho Kwon-Hae;Lee Jae-Hyun;Lee Jin-Wook;Kim Jeong-Gon;Jang Sung-Hwan;Yang Hee-Sung;Ko Jun-Ho;Park Ki-Yong
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권3호
    • /
    • pp.306-312
    • /
    • 2005
  • IMO $NO_x$ levels are generally possible to meet by means of primary on-engine measures. Further significant follow-on reductions are likely to require a secondary after-treatment technique. SCR(Selective Catalytic Reduction) technology is used almost exclusively for $NO_x$ removal in stationary combustion systems. In order to develop a practical SCR system for marine application on board ship, a primary SCR system using urea was made. The SCR system was set up on the ship, 'HANNARA' as a test vessel. employed a two-stroke cycle diesel engine as main propulsion, which is a training ship of Korea Maritime University. The purpose of this paper is to report the results about the basic effects of the below system parameters, The degree of $NO_x$ removal depends on some parameters, such as the amount of urea solution added, space velocity, reaction gas temperature and activity of catalyst.

바이오가스 내의 불활성 가스 성분 변화가 SI 엔진 성능에 주는 영향 (Effects of Inert Gas Composition Variations in Biogas on the Performance of a SI Engine)

  • 이선엽;박승현;박철웅;김창기;이장희;우세종
    • 한국가스학회지
    • /
    • 제16권5호
    • /
    • pp.14-20
    • /
    • 2012
  • 바이오가스는 Biomass, 유기성 폐기물 등의 혐기소화 공정을 통해 얻을 수 있는 대표적인 신재생연료로 저발 열량에도 불구하고 탄소중립적인 특성이 있기 때문에 이를 엔진에 적용하여 에너지를 생산하고자 하는 노력이 계속되어왔다. 바이오가스는 원료의 종류 및 혐기소화 공정 조건에 따라 그 연료 조성이 달라질 수 있는데, 이러한 조성 변화는 엔진 성능에 큰 영향을 미칠 수 있기 때문에 이에 대한 연구가 필요한 실정이다. 본 연구에서는 바이오가스 연료 내 불활성가스의 종류 및 비율을 변화시켜 모사하고 이를 이용하여 바이오가스 내 불활성가스 종류의 변화가 엔진 성능 및 배기 특성에 주는 영향을 파악하였다. 실험 결과로 각 불활성가스 종류 및 함량에 따른 최적 점화시기를 결정하였으며, 불활성 가스 조성 변화가 엔진 출력, 효율, 배기 성능에 미치는 영향을 제시하였다.

RF-diode Sputtering법으로 제작한 Co박막의 자기특성과 미세구조 (Magnetic Properties and Microstructure of Co Thin Films by RF-diode Sputtering Method)

  • 한창석;김상욱
    • 한국재료학회지
    • /
    • 제28권3호
    • /
    • pp.159-165
    • /
    • 2018
  • In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.

플레임트랩에 의한 메탄-공기 예혼합기의 연소특성에 관한 연구 (A Study on Combustion Characteristics of Pre-mixed $CH_4$-air by Flame Trap)

  • 김덕호;이재효;최수진;조규백;정동수
    • 한국자동차공학회논문집
    • /
    • 제13권2호
    • /
    • pp.22-28
    • /
    • 2005
  • Exhaust gas emissions from internal combustion engines are one of the major sources of air pollution. And, it is extremely difficult to increase gasoline engine efficiency and to reduce $NO_X$ and PM(particulate matter) simultaneously in diesel combustion. This paper offers some basic concepts to overcome the above problems. To solve the problems, a recommended technique is CAI(controlled auto-ignition) combustion. In this paper, a flame trap was used to simulate internal EGR(exhaust gas recirculation) effect. An experimental study was carried out to find combustion characteristics using homogeneous premixed gas mixture in the constant volume combustion chamber(CVCC). Flame propagation photos and pressure signals were acquired to verify the flame trap effect. The flame trap creates high speed burned gas jet. It achieves higher flame propagation speed and more stable combustion due to the effect of geometry and burned gas jet.

실시간 연소제어를 위한 화염 내 라디칼 계측기법 연구 (An Experimental Study on the Measurement of Radicals in Flame for Real Time Combustion Control)

  • 신명철;김세원;류태우;권승진
    • 한국연소학회지
    • /
    • 제11권3호
    • /
    • pp.18-25
    • /
    • 2006
  • The present studying is aimed to establish the relationship between flame chemiluminescence$(OH^*,\;CH^*,\;C_2^*)$ intensities and combustion conditions such as $NO_x$ emission characteristics. Measurements are made for $OH^*,\;CH^*,\;C_2^*$ radicals in gas & light oil diffusion flames. At turbulent nonpremixed combustion mode, the equivalence ratio is varied. The optical emissions were measured by photomultiplier(PMT) using optical band pass filter and spectrometer system. The experimental results showed that the ratio of radicals and $NO_x$ emission characteristics have exponential correlations and equivalence ratio characteristics have linear correlations at this experimental conditions.

  • PDF

스월 예혼합 버너의 화학반응식에 따른 NOx 특성에 대한 수치적 연구 (A Numerical Study on NOx Emission of the Swirl Premixed burner for Several Chemical Reaction Mechanisms)

  • 조천현;백광민;손채훈;조주형;김한석
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.133-135
    • /
    • 2012
  • This study presents the prediction of NOx and mixing characteristics with several chemical reaction mechanisms of methane in EV burner of double cone. Experimental results are compared with numerical results for validation. Mixing characteristics are analyzed at monitoring points based on the modified unmixedness. The mixing characteristics were improved in a certain case, the lance injection case. In 1-step reaction case, inside of the cone, flame was formed and lots of NOx was generated because the fuel injected from the lance was overestimated. In 2-step reaction case, numerical results showed a good agreement with experimental results in a qualitative manner.

  • PDF

소형 디젤엔진용 E-EGR밸브 개발에 관한 실험적 연구 (An Experimental Study on the Development of E-EGR Valve for Light Duty Diesel Engine)

  • 송창훈;우세종;이진욱;정용일;차경옥
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.928-933
    • /
    • 2001
  • EGR(Exhaust Gas Recirculation) is an effective strategy to control nitrogen oxides emissions from diesel engine. The EGR reduces $NO_x$ through lowering the oxygen concentration in the combustion chamber as well as through heat absorption. However, application of EGR system is difficult because of the penalty in fuel consumption and the increase in particulate matter. The engine used for the experimental was a 3-cylinder 0.8-liter turbo-charged light duty diesel engine with an electronic EGR valve. In this study, experiments were performed at variable vehicle speeds and loads on the chassis dynamometer. To evaluate the exhaust emissions with the EGR system testing was performed using cvs-75 mode test procedure. Results of the cvs-75 mode test achieve sufficiently to meet EURO3 standards.

  • PDF

Wire-Plate 반응기에서 펄스 코로나 방전을 이용한 탈황 탈질에 관한 연구 (A Study on the Removal of SOx/NOx by a Pulsed Corona Discharge in the Wire-Plate Reactor)

  • 신완호;송영훈;김한석;최연석;김석준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1910-1912
    • /
    • 1996
  • This paper presents the results of laboratory experimentals to remove $SO_2$ and $NO_x$ by a pulsed corona discharge in the wire-plate reactor. A rotating spark gap switch was used to generate the pulse by chewing the dc high voltage. Repetition frequency of the pulse was 60Hz and rising time of 50ns. The photo pictures of positive streamer corona taken by ICCD camera, pulse voltage and current were measured using a digital oscilloscope. Simultaneous effects of $C_{2}H_{4}$ injection and heterogeneous chemical reactions on nonthermal plasma process to remove $SO_2$ and $NO_x$ from flue gas were investigated in the present study

  • PDF