• 제목/요약/키워드: $NO_2$ reduction

검색결과 3,633건 처리시간 0.033초

페롭스카이트형 산화물에서 일산화탄소에 의한 질소산화물의 환원반응 (Catalytic Reduction of Nitric Oxide by Carbon Monoxide over Perovskite-Type Oxide)

  • 문행철;선창봉;이근대;안병현;임권택;홍성수
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.407-414
    • /
    • 1999
  • 능금산법으로 제조된 페롭스카이트형 산화물에서 CO에 의한 NO의 환원반응에 대한 연구를 행하였다. 촉매는 주로 Lanthanoid계 페롭스카이트를 사용하였고, 활성을 증가시키기 위해 A, B site에 Sr, Ba 및 Fe, Mn 등을 치환시켰다. $LaCoO_3$ 촉매에서 A site에 Sr을 일부 치환시키면 NO전환율이 증가하였다. 한편 B site에 Fe나 Mn을 일부 치환시키면 NO의 전환율이 증가하였으나 Fe의 치환량이 커지면 오히려 전환율이 감소하였다. 한편 $La_{0.6}Sr_{0.4}Co_{0.8}Fe_{0.2}O_3 $ 촉매에 $SnO_2$$MnO_2$를 혼합하면 촉매활성이 증가하는 상승효과를 보였다. 반응물에 첨가된 물은 촉매활성을 감소시켰으나 촉매에 대한 물의 작용은 어느 정도 가역적이었다. 또한 반응물에 첨가된 이산화황은 NO의 전환율을 감소시켰다.

  • PDF

Study on Chemical Removal of Nitric Oxide (NO) as a Main Cause of Fine Dust (Air Pollution) and Acid Rain

  • Seo, Hyeon Jin;Jeong, Rak Hyun;Boo, Jang-Heon;Song, Jimin;Boo, Jin-Hyo
    • Applied Science and Convergence Technology
    • /
    • 제26권6호
    • /
    • pp.218-222
    • /
    • 2017
  • This study was conducted to remove $NO_x$, which is the main cause of fine dust and air pollution as well as acid rain. $NO_x$ was tested using 3% NO (diluted in He) as a simulated gas. Experiments were sequentially carried out by oxidizing NO to $NO_2$ and absorbing $NO_2$. Especially, we focused on the changes of NO oxidation according to both oxidant ($NaClO_2$) concentration change (1~10 M) and oxidant pH change (pH = 1~5) by adding HCl. In addition, we tried to suggest a method to improve $NO_2$ absorption by conducting $NO_2$ reduction reaction with reducing agent (NaOH) concentration (40~60%). It was found that NO removal efficiency increased as both concentration of oxidant and flow rate of NO gas increased, and NO decreased more effectively as the pH of hydrochloric acid added to the oxidant was lower. The $NO_2$ adsorption was also better with increasing NaOH concentration, but the NO removal efficiency was ~20% lower than that of the selective NO reduction. Indeed, this experimental method is expected to be a new method that can be applied to the capture and removal of fine dust caused by air pollution because it is a method that can easily remove NO gas by a simple device without expensive giant equipment.

분말형 MnOx와 V2O2/TiO2 촉매를 이용한 저온영역의 백필터 공정에서 질소산화물 제거 특성 (Characterization of NOx Reduction on Filter Bag Support System at Low Temperature using Powder Type MnOx and V2O2/TiO2 Catalysts)

  • 김병환;김정헌;강필선;유승관
    • 한국대기환경학회지
    • /
    • 제26권1호
    • /
    • pp.1-9
    • /
    • 2010
  • In this study, the selective catalytic reduction of $NO_x$ with ammonia was carried out in a filter bag support reactor. The experiments were performed by powder type $MnO_x$ and $V_2O_5$/$TiO_2$ catalyst at low temperature between 130 and $250^{\circ}C$. Also, the effect of $SO_2$ and $H_2O$ on the NO conversion was investigated under our test conditions. The powder type catalysts were analyzed by X-ray photoelectron spectrum (XPS), X-ray diffraction(XRD), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). It was observed that NO removal efficiency of the powder type $V_2O_5$/$TiO_2$ catalyst was 85% at low temperature($200^{\circ}C$) under presence of oxygen and that of $MnO_x$ was 50% at the same condition. The powder type $V_2O_5$/$TiO_2$ catalyst, in conclusion, was found to be available for SCR reaction in a filter bag support system.

Selective Reduction of Organic Compounds with Non-Free Hydride Reducing Agents

  • Cha, Jin Soon
    • 통합자연과학논문집
    • /
    • 제1권3호
    • /
    • pp.192-194
    • /
    • 2008
  • A series of non-free hydride reducing systems containing boron or aluminum atom, which possess no metal-hydride bond but an available hydrogen at a branched ${\beta}$-position, has been applied to the selective reduction (chemo--, regio-, and stereoselective reduction) of organic compounds. The systems, comprised of diisopinocampheylborane and diisobutylalane derivatives, exhibited almost perfect selectivities in the reduction of aldehydes and ketones. The characteristics features of this systems leading to a perfect transformation have been depicted in this report, especially in the 1) Reduction of ${\alpha}$,${\beta}$-Unsaturated Carbonyl Compounds to Allylic Alcohols via 1,2-Reduction, 2) Chemoselective Reduction between Structurally Different Carbonyl Compounds, and 3) Stereoselective Reduction of Cyclic Ketones.

  • PDF

질산염과 산소에 의한 생물학적 퍼클로레이트 환원의 저해 (Inhibition of Biological Perchlorate Reduction by Nitrate and Oxygen)

  • 최혁순
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제14권6호
    • /
    • pp.29-34
    • /
    • 2009
  • 본 연구에서는 질산염(${NO_3}^-$)과 용존산소(DO)에 의한 생물학적 퍼클로레이트 환원의 저해 그리고 전자공여체를 차지하기 위한 이러한 전자수용체들의 경쟁적 관계를 조사하고자 염소이온프로브(chloride ion probe)를 직접적인 측정방법으로 사용하였다. 퍼클로레이트 환원미생물을 포함하는 플라스크에서 염소이온프로브를 이용하여 염소생성 (=퍼클로레이트 환원)을 모니터링하였다. 2 mM 퍼클로레이트의 생물학적 환원은 2 mM의 질산염에 의해 저해를 받았으며, 염소이온 생성율이 퍼클로레이트가 단독으로 존재하는 경우에 비해 30% 정도 감소하였고, 아세테이트가 제한된 상태이며 질산염과 퍼클로레이트가 공존하는 경우는 염소이온의 생성율이 약 70% 정도 감소하였다. 7-8 mg/L의 용존산소와 2 mM의 퍼클로레이트가 공존하는 조건에서 아세테이트의 공급정도와 상관없이 퍼클로레이트의 생물학적 환원작용이 완벽하게 저해를 받았다.

생활폐기물 소각장 2차 연소로에서 요소용액을 이용한 선택적무촉매환원 공정에 대한 전산유체역학 모사 및 현장 검증 (Computational Fluid Dynamics(CFD) Simulation and in situ Experimental Validation for the Urea-Based Selective Non-Catalytic Reduction(SNCR) Process in a Municipal Incinerator)

  • 강태호;뉘엔 타인;임영일;김성준;엄원현;유경선
    • Korean Chemical Engineering Research
    • /
    • 제47권5호
    • /
    • pp.630-638
    • /
    • 2009
  • 생활폐기물 소각장에서 발생되는 질소산화물($NO_x$)을 저감을 위한 요소용액 이용 선택적 무촉매 환원(SNCR: selective non-catalytic reduction) 상용화 공정에 대하여 전산유체역학(CFD: computational fluid dynamics) 모델을 개발하였고, 이 모델은 현장 실험결과로 검증되었다. 저 농도 일산화탄소와 12% 과잉공기 조건에서 요소와 질소산화물간의 7개 화학반응식과 액적의 증발과정을 포함하는 3차원 난류반응 흐름 CFD 모델은 소각로에 설치된 SNCR 공정의 유체역학 모사를 위하여 사용하였다. 본 SNCR 공정에서는 정면 노즐 1개와 측면 노즐 2개를 사용하여 2차 연소로 내에 요소용액을 공기와 함께 분사하였다. 3개의 노즐에 동일유량으로 NSR=1.8에서 요소용액과 공기를 분사할 경우, 출구온도는 현장 실험값과 모사값이 일치하며, 질소산화물 저감효율은 실험에서는 57%, CFD 모사에서는 59%를 보여주었다. 각 노즐 별 분사유량의 비율을 변화하면서 수행된 CFD 모사 결과에서는 3개의 노즐에 동일 유량을 분사하는 것보다 정면 1개 노즐에 측면노즐 유량의 2배를 분사하는 것이 약 8% 높은 질소산화물저감 효율을 보여주었다.

NOx 저감을 위한 다공성 광촉매 콘크리트 필터 제조 및 효율평가 (Porous Photocatalytic Concrete Filter Manufacturing and Efficiency Evaluation for NOx Reduction)

  • 김종규
    • 한국재료학회지
    • /
    • 제32권4호
    • /
    • pp.223-229
    • /
    • 2022
  • A porous photocatalyst concrete filter was successfully produced to remove NOx, by mixing TiO2 photocatalyst with lightweight aerated concrete. Ultra Fine Bubbles were used to form continuous pores inside the porous photocatalytic concrete filter, which was mixed via a bubble generation experiment. The optimal mixing condition was determined to be with 4 % of the bubble generation agent B. NO removal specimens were prepared for various photocatalytic loading conditions, and the specimen containing 3 % P-25 removed NO at a concentration of 1.03 µmol in 1 h. The NO removal rate of the porous photocatalytic concrete filter prepared in this study was 10.99 %. This photocatalytic filter performance was more than 9 times the amount of NO removed by a general photocatalytic filter. The porous photocatalyst concrete filter for removing NOx developed in this study can be applied to various construction sites and the air quality can be solved by reducing NOx contributing to the formation of fine particles.

산화촉매를 이용한 Fast SCR에서의 SCR 촉매 저감 연구 (A Study for SCR Catalyst Reduction in Fast SCR Using Oxidation Catalyst)

  • 이재옥;이대훈;송영훈;오동규;서정욱
    • 공업화학
    • /
    • 제24권3호
    • /
    • pp.333-336
    • /
    • 2013
  • 산업현장에서 배출되는 저온($150{\sim}250^{\circ}C$)의 배기가스에 포함된 질소산화물($NO_x$)을 제거하기 위한 공정으로써 산화 촉매와 암모니아 SCR 공정을 복합시킨 fast SCR 탈질공정에 대한 실험적인 연구가 수행되었다. Fast SCR 탈질공정을 위해서는 산화촉매를 이용 NO를 $NO_2$로 전환하는 것이 요구된다. 산화촉매 부피(Oxidation Catalyst Volume, OCV)에 따른 NO 전환율을 실험적으로 확인하였다. OCV 563000 h, 375000 h, 281000 h 각 경우에 NO 전환율은 37% : 45% : 51%이었다. 온도에 따른 fast SCR 탈질효율은 $NO_2/NO_x$ 비율 45%일 때 가장 높았다. $NO_2/NO_x$ 비율 45%, 온도 $200{\sim}250^{\circ}C$ 및 공간속도 $10000{\sim}30000h^{-1}$에서 standard SCR과 fast SCR 탈질효율을 비교한 결과, standard SCR은 공간속도 에 따라 온도별로 차이를 보였으나 fast SCR은 차이를 보이지 않았다. Fast SCR 반응을 고려한 탈질운전에서 공간속도 $10000h^{-1}$에서의 촉매부피와 비교하여 공간속도 $30000h^{-1}$으로 운전할 경우, NH3 SCR 촉매부피를 50% 이상 줄일 수 있음을 알 수 있었다.

요소용액을 이용한 파일럿규모 SNCR 공정에 대한 CFD 모델링 및 모사 (Computational Fluid Dynamics(CFD) Simulation for a Pilot-scale Selective Non-catalytic Reduction(SNCR) Process Using Urea Solution)

  • 뉘엔타인;강태호;임영일;김성준;엄원현;유경선
    • Korean Chemical Engineering Research
    • /
    • 제46권5호
    • /
    • pp.922-930
    • /
    • 2008
  • 질소산화물($NO_x$) 저감을 위한 선택적 무촉매 환원(SNCR; selective non-catalytic reduction) 공정의 성능은 유속, 반응온도 그리고 반응물간의 혼합과 같은 공정변수에 민감하다. 따라서 효율적인 SNCR 공정의 설계와 운전을 위하여 속도장, 온도장, 및 화학물질들의 농도 분포에 대한 이해가 필수적이다. 본 연구에서는 150 kW LPG 버너가 장착되고, 요소용액을 환원제로 사용하는 파일럿 규모 SNCR 공정에 대하여 액적모델과 결합된 2차원 난류반응흐름 전산유체역학(CFD; computational fluid dynamics) 모델을 개발하고, 이 모델은 실험결과를 통하여 검증된다. 난류반응 CFD 모델에서는 $NO_x$저감율과 $NH_3$-slip을 예측하기 위하여 7개 반응식으로 이루어진 요소용액과 $NO_x$와의 반응기작을 이용한다. 이러한 모델을 이용한 CFD 모사결과는 온도와 NSR(normalized stoichiometric ratio)에 따른 $NO_x$ 저감율에서 실험결과와 최대 20% 이내에서 차이를 보여주고 있으며, $NH_3$-slip에 대하여는 실험결과와 모사결과 사이에 유사한 경향성을 얻었다.