• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.500-512
• /
• 2000

Background : To evaluate the efficacy of two methods of obtaining lung recruitment to reduce ventilator-induced lung injury(VILI). Methods : Fifteen New-Zealand white rabbits were ventilated in the pressure-controlled mode while maintaining constant tidal volume(10 ml/kg) and fixed respiration rate. Lung injury was induced by repeated saline lavage (PaO2<100 mmHg), and the pressure-volume curve was drawn to obtain Pflex. The animals were then randomly assigned to three groups and ventilated for 4 hours. In the control group(n=5), positive end-expiratory pressure(PEEP) less than that of Pflex by 3 mmHg was applied throughout the study. In the recruitment maneuver(RM) group(n=5), RM(CPAP of 22.5 mmHg, for 45 seconds) was performed every 15 minutes in addition to PEEP level less than Pflex by 3 mmHg This phrase is unclear. In the Pflex group, PEEP of Pflex was given without RM. Gas exchange, lung mechanics, and hemodynamics parameters as well as pathology were examined. Results : 1) Both the control and RM groups showed decreasing tendency in PaO2 with time. There was significantly decreased PaO2 at 4 hr compared to Ihr(p<0.05). But in the Pflex group, PaO2 did not decrease with time(p<0.05 vs other groups at 3, 4 hr). PaCO2 did not show significant difference among the three groups. 2) There was no significant difference in static compliance and plateau pressure. Mean blood pressure and heart rate also did not show any significant difference among the three groups. 3) The pathologic exam showed significantly less neutrophil infiltration in the Pflex group than in the control group(p<0.05). There was borderline significant difference in hyaline membrane score among the groups (p= 0.0532). Conclusion : Although recruitment maneuver of the injured lung may be important in decreasing VILI, it alone may not be sufficient to minimize VILI.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.249-256
• /
• 2012

The changes in the volatile organic compounds in plum after its electron beam irradiation and storage were determined using the simultaneous distillation extraction method and gas chromatograph-mass spectrometry. There were 44, 46, 45, 47, and 38 volatile compounds in the 0-, 0.25-, 0.5-, 0.75-, and 1 kGy irradiated samples, respectively. Also, the volatile flavor components of the plum that was stored for 30 days were identified as 48, 40, 40, 39, and 40 components. The compositions of the volatile compounds of the control and irradiated samples showed a similarity after the storage. Especially, the more important volatile flavor of the plum was identified as hexanal of the C6compounds, (E)-2-hexenal and (Z)-3-hexenal. In particular, hexanal, (E)-2-hexenal, and (Z)-3-hexen-1-ol increased in all the doses, where as hexanol and (E)-2-hexen-1-ol decreased. Among the lactone compounds, ${\gamma}$-hexalactone, ${\gamma}$-octalactone, and ${\gamma}$-decalactone were identified during the storage period in the raw samples. Hexanonic acid and 2-hexenoic acid were not identified during the storage of the samples, and 2-methylprrole was detected only when the storage samples were irradiated at a dose higher than 0.5kGy. Therefore, it was shown that there was no effect on the variation of the volatile organic component suntil 1 kGy in the plum was irradiated with an electron beam.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1295-1305
• /
• 2021

Satellite-derived ocean color products are required to effectively monitor clear open ocean and coastal water regions for various research fields. For this purpose, accurate correction of atmospheric effect is essential. Currently, the Geostationary Ocean Color Imager (GOCI)-II ground segment uses the reanalysis of meteorological fields such as European Centre for Medium-Range Weather Forecasts (ECMWF) or National Centers for Environmental Prediction (NCEP) to correct gas absorption by water vapor and ozone. In this process, uncertainties may occur due to the low spatiotemporal resolution of the meteorological data. In this study, we develop water vapor absorption correction model for the GK-2 combined GOCI-II atmospheric correction using Advanced Meteorological Imager (AMI) total precipitable water (TPW) information through radiative transfer model simulations. Also, we investigate the impact of the developed model on GOCI products. Overall, the errors with and without water vapor absorption correction in the top-of-atmosphere (TOA) reflectance at 620 nm and 680 nm are only 1.3% and 0.27%, indicating that there is no significant effect by the water vapor absorption model. However, the GK-2A combined water vapor absorption model has the large impacts at the 709 nm channel, as revealing error of 6 to 15% depending on the solar zenith angle and the TPW. We also found more significant impacts of the GK-2 combined water vapor absorption model on Rayleigh-corrected reflectance at all GOCI-II spectral bands. The errors generated from the TOA reflectance is greatly amplified, showing a large error of 1.46~4.98, 7.53~19.53, 0.25~0.64, 14.74~40.5, 8.2~18.56, 5.7~11.9% for from 620 nm to 865 nm, repectively, depending on the SZA. This study emphasizes the water vapor correction model can affect the accuracy and stability of ocean color products, and implies that the accuracy of GOCI-II ocean color products can be improved through fusion with GK-2A/AMI.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.1
• /
• pp.56-64
• /
• 2011

This study was conducted to evaluate the use of exogenous enzymes as a potential means of improving the ruminal digestion (i.e., degradability) of alfalfa hay and rice straw. Twenty six enzyme-additives were examined in terms of protein concentration and enzymic activities on model substrates. The exogenous enzymes contained ranges of endoglucanase, xylanase, ${\beta}$-glucanase, ${\alpha}$-amylase, and protease activities. Six of the enzyme additives were chosen for further investigation. The enzyme additives and a control without enzyme were applied to mature quality alfalfa hay substrate and subsequently incubated in rumen batch cultures. Five of the enzyme additives (CE2, CE13, CE14, CE19, and CE24) increased total gas production (GP) at 48 h of incubation compared to the control (p<0.05). The two additives (CE14 and CE24) having the greatest positive effects on alfalfa hay dry matter, neutral detergent fibre (NDF) and acid detergent fibre (ADF) degradability were further characterized for their ability to enhance degradation of low quality forages. The treatments CE14, CE24, a 50:50 combination of CE14 and CE24 (CE14+24), and control (no enzyme) were applied to mature alfalfa hay and rice straw. For alfalfa hay, application of the two enzyme additives, alone and in combination, increased GP compared to the control at 48 h fermentation (p<0.05), whereas only CE14 and CE14+24 treatments improved GP from rice straw (p<0.05). Rumen fluid volatile fatty acid concentrations throughout the incubation of rice straw were analyzed. Acetate concentration was slightly lower (p<0.05) for CE14${\times}$CE24 compared to the control, although individually, CE14 and CE24 acetate concentrations were not different from the control. Increases (p<0.05) in alfalfa hay NDF degradability measured at 12 and 48 h of incubation occurred only for CE14 (at 12 h) and for CE14+24 (at 12 and 48 h). Similarly, ADF degradability increased (p<0.05) with CE14 and CE14+24. As for rice straw, increased DM degradability was observed at 12 and 48 h of incubation for all enzyme treatments with an exception for CE14 at 12 h. The degradability of NDF was improved by all the enzyme treatments at either incubation time, while ADF degradability was only enhanced at 48 h. Overall, the enzymes led to enhanced digestion of mature alfalfa and there was evidence of improved digestibility of rice straw, an even lower quality forage.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.423-432
• /
• 2020

Objectives: In this study, we analyzed the current state of delivery containers and packages and established handling guidelines to safely transport delivery containers and packages for use in research, testing, and examination reagents. Methods: Handling guidelines were revised in such categories as maintenance of the handling facilities, storage, loading and unloading, containers and packages, transportation, etc. In addition, we analyzed the current state of domestic sales for hazardous chemicals used for research, testing, and examination reagents, and investigated the handling guidelines related to delivery transportation in the USA, EU, and Japan by chemical property. Results: There are 6,160 companies selling hazardous chemicals. Among them, the 476 companies selling reagents for use in research, testing, and examination were investigated. Total amounts handled reached 425,000 tons, contributing to 0.2% of the total. For delivery transportation, internal containers and packaging was specified for chemical properties as follows: within 1 L for flammable gas, within 5 L for flammable liquid, and within 18 L for others. In addition, the maximum size of the outer package was set within 130 cm for total length, width, and height, and no dimension of the packaging could exceed 60 cm. Sixty-four hazardous chemicals with explosiveness or acute inhalation toxicity were prohibited for delivery transportation. Conclusion: Specified handling guidelines for inner and outer containers as well as packaging were regulated for delivery transportation of hazardous chemicals used for reagents. In addition, 64 hazardous chemicals were prohibited for delivery transportation. These are designed to prevent transportation accidents involving hazardous chemicals for reagents and thus protect the safety and health of transporters who handle hazardous chemicals.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.93-98
• /
• 1982

Effect of the application time on the persistence of IBP and isoprothiolane in rice plant was studied in the field and effects of the water depth and soil texture on their persistence were also tested as a pot experiment. When granules were applied to the rice paddy water, two fungicides were readily absorbed through the root system and rapidly translocated to the upper parts of the plant. The concentrations of two fungicides in rice plant reached to the maximum within 24 hr regardless of the application time. When applied at the maximum tillering stage, the persistence pattern of two fungicides in plant showed similar trends; that is, residue levels of two compounds declined rapidly upto 7 days after application but more slowly thereafter. When applied at the heading stage, the persistence pattern of IBP in plant was similar to the maximum tillering stage while isoprothilane was quite different; 3 ppm reached on 3rd days after application was maintained almost constant for further 25 days. There was no effect of the water depth on the persistence of two compounds in plant and IBP concentration in plant was also not affected by soil texture. However, isoprothiolane in plant was higher in sandy loam than in loam and clay loam. Isoprothiolane residues in plant were much higher than those of IBP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1217-1226
• /
• 2004

A psychrotrophic bacterial strain, Pseudomonas fluorescens BM07, synthesized unsaturated fatty acids (UFA) from fructose in response to lowering of growth temperature, and incorporated them into both polyhydroxyalkanoic acid (PHA) and membrane lipid. The blocking of PHA synthesis by adding 5 mM 2-bromooctanoic acid to the growth medium, containing 70 mM fructose, was found to be a useful means to profile the composition of membrane lipid by gas chromatography. As the growth temperature changed from 35 to $50^{\circ}C$, the total content of two UFA, 3-hydroxy-cis-5­dodecenoic acid ($C_{12:1}$) and 3-hydroxy-cis-7-tetradecenoic acid ($C_{14:1}$), in PHA increased from 31 to 44 $mol\%$. The growth at lower temperatures also led to an increase in the level of two major UFA, palmitoleic acid (C16:1 cis9) and cis-vaccenic acid (C18:1 cis11), in membrane lipid. A fraction of these membrane-lipid UFA was converted to their corresponding cyclopropane fatty acids (CFA). The CFA conversion was a function of culture time, exhibiting biphasic increase before and after entering the stationary phase. However, pH changes in growth media had no effect on the CFA conversion, which is contrary to the case of E. coli reported. The cells grown at $30^{\circ}C$ responded to a cold shock (lowering the medium temperature down to $10^{\circ}C$) by increasing the level of C16:1 cis9 and C 18: I cis II up to that of $10^{\circ}C$-grown control cells and concomitantly decreasing the relative level of cis-9,10­methylenehexadecanoic acid (the CFA converted from C16:1 cis9) from 14 to 8 $mol\%$, whereas the 10-grown cells exhibited little change in the lipid composition when exposed to a warmer environment of $30^{\circ}C$ for 12 h. Based on this one- way response, we suggest that this psychrotrophic strain responds more efficiently and sensitively to a cold shock than to a hot shock. It is also suggested that BM07 strain is a good producer of two unsaturated 3-hydroxyacids, $C_{12:1}\;and\;C_{141:1}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.230-235
• /
• 2020

Objective: This study was realized to evaluate the nutritional value of rice grains as a replacement for corn grains in the diet of growing Hanwoo steers. Methods: Two experimental diets were prepared: i) Corn total mixed ration (TMR) consisting of 20% corn grains and ii) Rice TMR consisting of 20% rice grains, in a dry matter (DM) basis. These treatments were used for in vitro rumen fermentation and in vivo growth trials. In the rumen fermentation experiment, the in vitro DM digestibility (IVDMD), in vitro crude protein digestibility (IVCPD), in vitro neutral detergent fiber digestibility, pH, ammonia nitrogen, and volatile fatty acids (VFA) were estimated at 48 h, and the gas production was measured at 3, 6, 12, 24, and 48 h. Twenty four growing Hanwoo steers (9 months old; body weight [BW]: 259±13 kg) were randomly divided into two treatment groups and the BW, dry matter intake (DMI), average daily gain (ADG), and feed conversion ratio (FCR) were measured. Results: The in vitro experiment showed that the IVDMD, IVCPD, and VFA production of the Rice TMR were higher than those of the Corn TMR (p<0.05). The growth trial showed no differences (p>0.05) in the final BW, ADG, DMI, and FCR between the two TMRs. Conclusion: The use of rice grains instead of corn grains did not exhibit any negative effects on the rumen fermentation or growth performance, thereby rice grains with a DM of less than 20% could be used as a starch source in the diet of growing steers.