• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1021-1022
• /
• 2013

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1298-1300
• /
• 1994

An ability of $NO_2$ gas detection has been investigated using dilithium phthalocyanine($Li_2Pc$) Langmuir-Blodgett (LB) films. It is a well-known gas sensitive material and has been manufactured under a surface pressure of 30mN/m. A status of deposited films was confirmed by UV-visible absorption spectrum, ellipsometry measurements and current-voltage characteristics. Gas-detection characteristics of the films were studied through an electrical conductivity, response time, recovery time, and reproducibility under 200 ppm of $NO_2$ gases.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.80-85
• /
• 1999

In this paper, $NO_2$ gas detection characteristics of Octa-dodecyloxy copper-phthalocyanine films prepared by LB method was investigated measuring the electrical conductance of these films. The electivity characteristics of these LB films exposed to $NO_2, NO, and SO_2$ gas was also investigated. Conductivity activation energy of these films as a function of temperature was obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.179-182
• /
• 1995

The NO$_2$gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett(LB) films of Copper-tetra-tert-butylphthalocyanine(CuTBP). The optimum conditions for a film deposition were obtained through a study of $\pi$-A isotherms, and the deposited film status was confirmed by the ellipsometry measurements. It was found that at room temperature there are increments of electrical conductivities by 40 times, 25 seconds of response time and 40 seconds of response time when the films were exposed to the 200ppm NO$_2$gases. We hale observed an increase of the electrical conductivities as the density of NO2 gas increases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.118-121
• /
• 1994

The NO$_2$ gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett(LB) film of Copper-tetra-tert-butylphalocyanine(CUTBP). The optimum conditions for a film deposition were obtained through a study of $\pi$-A isotherm and the deposited film status was confirmed by ellipsometry measurements. In the NO$_2$ response experiments, first of all, the proper number of layer was obtained by a change of the electrical conductivities depending on the number of layer when the film is exposed to the gas. And response time, recovery time, and reproducibility were measured on it. On the other hand, how the NO$_2$ gas interacts to the LB film was studied by UV/visible absorption spectra.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.496-501
• /
• 1995

The N $O_{2}$ gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett (LB) films of Copper-tetra-tert-butylphthalocyanine (CuTBP), Dilithium phthalocyanine (Li$_{2}$Pc), N-docosylpyridinium TCNQ(C$_{22}$Py(TCNQ)), Polyamic acid alkylamine salts (PAAS). The optimum conditions for a film deposition were obtained through a study of .pi.-.ALPHA. isotherms and the deposited film status was confirmed by electrical and optical methods such as UV/visible absortion spectra, thickness measurements by ellipsometry, and electrical capacitances. A response of the LB films to the N $O_{2}$ gas was measured by a change of the electrical conductivities when the film is exposed to the gases. The CuTBP LB film shows the biggest change of the electrical conductivities when it is exposed to the N $O_{2}$ gases. And the order of gas-detection performance is the following;Li$_{2}$Pc, $C_{22}$Py(TCNQ), and PAAS LB films. Especially, the CuTBP and Li$_{2}$Pc LB films not only show the bigger change in the electircal conductivities when exposed to the gas, but return to the original state when the gas is desorbed.d.

• YAKHAK HOEJI
• /
• v.3 no.1
• /
• pp.45-47
• /
• 1957

A paper chromatographical method is studied to detect As and Sb from a mixed sample applying the principle of Gutzeit's. After spoting the mixed $AsH_3$ sample on the $AgNO_3$ band of paper strip (6 mm $\times$ 300 mm of Whatman No.52 or Toyo No.2 filter paper), the strip is developed by ascending method using N-HCl solution as a developing soluvent. The color spot detection of As and Sb is done by exposing the dried chromatogram to $H_2S$ stream. According to the experiments, the detectable minimum range of As is 3 micrograms and that of Sb is 15 micrograms. The yellow phosphorous interfers to the color spot detection of As and Sb, so that, previously the most of yellow phosphorous from the sample should be removed out.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.407-412
• /
• 2009

In this study, a rapid and efficient concentrating procedure that can be used for detecting viruses in vegetables was developed. The Sabin strain of poliovirus type 1 was used to evaluate the efficiency of virus recovery. The procedure included: (a) elution with 0.25 M threonine-0.3 M NaCl pH 9.5; (b) polyethylene glycol (PEG) 8000 precipitation; (c) chloroform extraction; (d) 2$^{nd}$ PEG precipitation; (f) RNA extraction; (g) reverse transcription-polymerase chain reaction (RT-PCR) combined with semi-nested PCR. The overall recoveries by elution/concentration were 29.0% from cabbage and 13.7% from lettuce. The whole procedure usually takes 18 hr. The overall detection sensitivity was 100 RT-PCR units of genogroup II norovirus (GII NoV)/25 g cabbage and 100 RT-PCR units of GII NoV/10 g lettuce. The virus detecting method developed in this study should facilitate the detection of low levels of NoV in cabbage and lettuce.

• Nuclear Engineering and Technology
• /
• v.28 no.4
• /
• pp.423-430
• /
• 1996

The improved and advanced Annulus Gas System(AGS) has been developed for Wolsong 2 to satisfy the requirements of the regulatory body. The Atomic Energy Control Board(AECB) required a shorter detection time following a small leak from a pressure tube and/or calandria tube. This paper describes licensing requirements, functional requirements and detail design description for the AGS. The Wolsong unit No. 1 AGS was designed to operate as a stagnant system normally requiring only pressure regulation and having provisions for purging. no improved AGS involves the adoption of gas recirculation in AGS, duplication of dew point indicators with additional instrumentation and sampling provisions to prompt operator action. The improved system operates in the recirculation mode with continuous dew point measurement for leak detection. An AGS with improved detection instrumentation is provided.

• Journal of Information Technology Applications and Management
• /
• v.25 no.2
• /
• pp.41-52
• /
• 2018

This paper presents a method for accurate camera self-calibration based on SIFT Feature Detection and image quality assessment. We performed image quality assessment to select high quality images for the camera self-calibration process. We defined high quality images as those that contain little or no blur, and have maximum contrast among images captured within a short period. The image quality assessment includes blur detection and contrast assessment. Blur detection is based on the statistical analysis of energy and standard deviation of high frequency components of the images using Discrete Cosine Transform. Contrast assessment is based on contrast measurement and selection of the high contrast images among some images captured in a short period. Experimental results show little or no distortion in the perspective view of the images. Thus, the suggested method achieves camera self-calibration accuracy of approximately 93%.