• Journal of Life Science
• /
• v.24 no.6
• /
• pp.603-611
• /
• 2014

The lectins were separated from Korean and Chinese mung bean seeds finally via chromatography using Sephadex G-100 and their biochemical features were studied and compared. They showed no hemagglutination with human red blood cells regardless of trypsin treatment and showed hemagglutination with only trypsin treated rabbit red blood cells. The molecular weights of two lectins were identified as 54 kDa and 28 kDa by SDS-PAGE. It was found that while the optimal reaction temperature of the lectin from Korean mung bean was $60^{\circ}C$, that of the lectin from Chinese mung bean seeds was $50^{\circ}C$. It was found also that the most thermal stable temperature of the seed lectin from Korean mung bean seeds was $50^{\circ}C$ and the lectin from Chinese mung bean was $40-50^{\circ}C$. The lectin from Korean mung bean seeds showed the highest activity at pH 3.2 and the lectin from Chinese mung bean showed the highest activity at pH 6.2. It was identified that when treating a denaturant, thiourea and guanidine-HCl resulted in no hemagglutination, so they induced denaturalization. It was identified also that there was no hemagglutination with urea, so it did not induced denaturalization. They showed no septicity to 6 types of carbohydrates including D-glucose. In addition, the lectins from the two mung bean seed had specificity to metal ions.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.152-156
• /
• 2016

Experimental research on the preparation of photocatalyst for the decomposition of brilliant blue FCF ($C_{37}H_{31}O_9N_2S_3Na_2$) was performed. $TiO_2$ and ZnO powders were prepared from titanium (IV) sulfate and zinc acetate at low reaction temperature and atmospheric pressure by hydrothermal precipitation method without calcination. In addition, $TiO_2$ was prepared with cationic surfactant CTAB (Hexadecyltrimethyl ammonium bromide) at the same conditions. The physical properties of prepared $TiO_2$ and ZnO, such as crystallinity, average particle size and absorbance, were investigated by XRD, Zeta-potential meter and DRS. And, the photocatalytic degradation of brilliant blue FCF has been studied in the batch reactor under UV radiation. For the photocatalysts prepared without CTAB, $TiO_2$ has smaller particle size and larger absorbance and photocatalytic reaction rate than ZnO. And $TiO_2$, prepared with CTAB whose concentration is 1/10 of that of precursor, shows 15% higher than that prepared without CTAB in final photocatalytic degradation ratio of brilliant blue FCF.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.269-275
• /
• 2017

$NO_X$ reducing technique such as LNT, LNC, and selective catalytic reduction (SCR) have been developed and applied, especially on heavy-duty vehicles. However, it is expected that $NO_X$ reduction techniques will also be applied to diesel passenger vehicles. The urea-SCR system is receiving attention as the most effective $NO_X$ reduction technology without a fuel penalty. Thus, many advanced countries are developing this technology. The urea-SCR system sprays an aqueous urea solution that separates $NO_X$ into $N_2$ and $H_2O$, which are harmless and emitted into the atmosphere. The urea injected in front of the SCR catalyst should be changed to 100％ $NH_3$, which is required for $NO_X$ reduction in the SCR system to maximize the reduction efficiency. The purpose of this study was to determine the basic data for the urea-SCR system to maximize the $NO_X$ reduction efficiency by understanding the $NO_X$ reduction characteristics in a real passenger vehicle to comply with the post EURO-6 emission regulation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.566-576
• /
• 1997

This study was performed to evaluate the tensile strength of solder joint in titanium and the wettability of 14K gold solder on titanium. Two pieces of titanium rod 30 mm in length and 3mm in diameter were butt-soldered with a 14K gold solder using the electric resistance heating under flux-argon atmosphere, the infrared heating under argon atmosphere, and the infrared heating under vacuum-argon atmosphere. A tensile test was performed at a crosshead speed of 0.5 mm/min, and fracture surfaces were examined by SEM. To evaluate the wettability of 14K gold solder on titanium, titanum plates of a $17{\times}17{\times}1mm$ were polished with #80-#2000 emery papers, and the spreading areas of solder 10 mg were measured by heating at 840 * for 60 seconds. The solder-matrix interface regions were etched by the solution of 10% KCN-10% (NH4)2S2O8, and analyzed by EPMA. The results obtained were summarized as follows ; 1. The maximum tensile strength was obtained when the titanium surface was polished with #2000 emery paper and soldered using the electric resistance heating under flux-argon atmosphere. Soldering strengths showed the significant difference between the electric resistance heating and the infrared heating(p<0.05). 3. The fracture surfaces showed the aspect of brittle fracture, and the failure developed along the interfaces of solder-matrix reaction zone. 4. The EPMA data for the solder-matrix interface region revealed that the diffusion of Au and Cu occurred to the titanium matrix, and the reaction zone showed the higher contents of Au, Cu and Ti than others.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.314-325
• /
• 2000

Thermal degradation of thermoplasitc polyurethane modified polycarbonate has been investigated by means of DSC, GPC and FT-IR techniques. The polyurethanes used in this study are TPU-35 and TPU-53 containing 35.5 and 53.4 wt% of hard segments, respectively. The more content of hard segment, the higher the glass transition temperature (T$_{g}$) of TPU was observed. On the other hand, the T$_{g}$ of the TPU modified PC decreased with the content of TPU and the annealing temperature regardless of the hard segment contents. The latter behavior nay arise from the thermal degradation of TPU upon annealing process: the observed thermal degradation temperatures were at 240 and 25$0^{\circ}C$ for the PC/TPU-35 and PC/TPU-53, respectively. The molecular weight, molecular weight distribution and viscosity agree well with the DSC measurement, which implicates a thermal degradation of TPU. In addition, thermal stability of the TPU modified PC linearly decreased with an incorporation of TPU. Transesterification or any interaction was not observed using FT-IR: the evidence was no frequency shift or any variance betwere the carbonyl stretching and NH group. For the specimens prepared below the degradation temperature, the enhancement of the thickness dependent impact strength of the PC/TPU blend was observed, and the morphology of the two blends was compared.d.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.113-118
• /
• 2003

In this study, broilers were raised up to 6 weeks of age in a single room to determine if different levels of dietary protein or addition of aluminum sulfate[alum, $Al_2$(SO$_4$)$_3$ㆍ14$H_2O$] to the litter affected growth performance, production of ammonia(NH$_3$) and soluble phosphorus(SP) content of the litter.The experimental treatments consisted of six treatments in a 2x3 factorial arrangements: T$_1$＝23% protein ＋ 0.2% alum to litter; T$_2$＝21% protein ＋ 0.2% alum to litter; T$_3$＝19% protein ＋ 0.2% alum to litter; T$_4$＝23% protein ＋ no alum; T$_{5}$＝21% protein ＋ no alum; T$_{6}$＝19% protein ＋ no alum. For broiler performance, there was no effect of alum addition to the litter, but the dietary protein levels significantly affected feed intake from days 22 to 42(P<0.05) and day 0 to 42(P< 0.05), weight gain during all periods(P<0.05 or 0.01), and feed:gain from day 0 to 21(P<0.05) and day 0 to 42(P<0.05). Alum addition to the litter did not affect body weight at 21 and 42 days, but dietary protein levels has a significant effect on it at both 21(P<0.0l) and 42 days(P<0.05). Alum addition only affected ammonia production at weeks 3(P

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2013

An exceptional case of inhabitation of a Sphagnum sp. was firstly confirmed at abandoned paddy terrace (APT) wetland in Ansan. Water sampling for analyzing of physicochemical conditions including nutrients such as NP, $Ca^{2+}$ and $Mg^{2+}$ was performed and the vegetation map for distribution of Sphagnum sp., topographical map, and flora list for companion species were made at field in June 2011. From the results, the Sphagnum sp. in the study site was identified as S. palustre and it covered about 8% of the wetland cover of 3,200 $m^2$. Most distributions of S. palustre were observed at tussock structures as micro-topography by sedges and grasses within a wetland (74%) and the shaded slope area under Pinus densiflora's canopy in wetland boundary (26%). Despite that APT in Ansan is relatively lower wetland in altitude than high moors, the contents of calcium ($0.45{\pm}0.2$) and magnesium ($1.48{\pm}0.6$) ion which are critical limiting factors for Sphagnum spp. were very low levels as well as NP ($PO_4$-P, $0.02{\pm}0.0$; $NO_3$-N, $0.25{\pm}0.3$; $NH_4$-N, $0.06{\pm}0.1$) and it could enable the inhabitation of S. palustre in lower APT.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.423-430
• /
• 2018

Insomuch as it is important to manage water quality, from the perspective of water management, it is essential to understand the effect of the weirs on water quality and phytoplankton dynamics in various regions. The purpose of this study is to investigate the characteristics of nitro-nutrients, as well as occurrences and succession patterns of phytoplankton, in the river sections of the two weirs in the Yeongsan River for the five years (from 2012 to 2016) after the weir construction. In respect to this data, the average water temperature measured at the representative point in the section of the Seungchon Weir ($17.1^{\circ}C$) was higher than that of the Juksan Weir ($16.6^{\circ}C$) by comparison. By way of an analysis of this data, it was found that the water quality variables such as, organic matter, nitrogen nutrients and phosphorus nutrients were improved gradually during the period, but the degree of the improvement differs as noted and measured between the weirs. Under the circumstances, it is especially noted that the $NH_3-N$ concentration was higher for the point of the Seungchon Weir (2.204 mg/L) than that of the Juksan Weir (1.157 mg/L). This indicates that effluent as seen from sewage treatment plants and hydrological feature near the densely population area, could be the main cause for the incidence of water pollution in the upstream section of the Seungchon Weir. Additionally, the phytoplankton analysis showed that a relative abundance of diatoms and green algae were 56.9 % and 25.8 % respectively. However, it is noted that the cyanobacteria was measured lower as 10.7 %. Also, in the study sites cell density and occurrence frequency of cyanobacteria were relatively lower than compared to the same measurements noted in other rivers.

• Korean Journal of Microbiology
• /
• v.33 no.4
• /
• pp.267-273
• /
• 1997

Various physico-chemical and microbiological parameters of a composting system were compared with respect to their potential use for the monitoring and evaluation of composting processes for cattle manure. The temperature changed within a range of $30-65^{\circ}C$ during the whole composting process, and the period of active composting (>$40^{\circ}C$) persisted for 16 days. The concentrations of total carbon, total nitrogen, and organic matter decreased by 15% during active composting, but significant changes in C/N ratio were not observed. The decrease of temperature in the latter period of active composting caused a decrease of $NH_4^+-N$ and an increase of $NO_3^--N$ in the composting pile. When temperature exceeded $50^{\circ}C$, the population of thermophiles was higher than that of mesophiles by more than 1 or 2 orders of magnitude. Correlation analyses showed that amylase activity correlated positively with the population of mesophiles and reducing sugar content, but negatively with the population of thermophiles. Amylase activity was higher at the beginning of active composting, whereas cellulase, xylanase and ligninase activities which showed close relationship with each other, increased continually during active cornposting, suggesting the distinction of temporal niches between amylose-degrading and lignocellulose-degrading bacteria in the same habitat.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.205-210
• /
• 2008

Sedum kamtschaticum has been used as one of the native valuable plants for ornamental purpose. This experiment was conducted to find out the optimum media for pot cultured Sedum kamtschaticum using peatmoss and coir-based mixtures. Four mixtures such as peatmoss:perlite(5:5, v/v), peatmoss:perlite(7:3, v/v), coir:perlite(5:5, v/v), and coir:perlite(7:3, v/v) were used. Plants were irrigated with a Sonneveld solution in an ebb & flow system. The content of T-N, K, and Ca in the peatmoss-based media was higher than those of the coir-based media. The concentration of T-N, K, and Ca in the shoots of Sedum kamtschaticum increased when plants were cultured with peatmoss-based media. In the peatmoss-based media, plant growth, such as number of branches, leaf length and shoot fresh and dry weights, were significantly increased than those of plant grown in the coir-based media. As the results, the optimum media for pot cultured Sedum kamtschaticum in an ebb & flow system was considered to be the peatmoss-based mixtures.