• Journal of Environmental Science International
• /
• 제28권3호
• /
• pp.303-320
• /
• 2019

Water quality is characterized by various complex factors. Therefore, a systematic understanding of water quality trends is required to carry out a proper evaluation. In this study, we analyzed the spatio-temporal water quality characteristics of the Nakdong River using five-year data from 2012 to 2016. Data was collected on the pH, DO, BOD, COD, SS, TN, TP, TOC, WT, EC, $NH_3-N$, $NO_3-N$, $PO_4-P$, Chl-a, rainfall, and total and fecal coliforms. A total of 38 water quality measurement stations, from Andong1 to Gupo, were considered. Statistical analyses including trend, cluster, and factor analyses were conducted to identify the dominant water quality components affecting the Nakdong River. The Nakdong River was spatially classified into three groups for up-stream (Andong1 to Sangju1), mid/up-stream (Donam to Dalseong), and mid/down-stream (Hwawonnaru to Gupo) data collection, and temporally into two groups for summer/fall (7~10), and the rest of the season (11~6) data. The water quality of the entire Nakdong River showed trends similar to the mid/down-stream section, which indicates the importance of water quality management in this section. Suspended solids, phosphorus, and coliform groups were established as important factors to be considered in the summer/fall season across the river, especially in the mid/down-stream section. Nitrogen and organic matter were identified as important factors to be considered in the rest of the season, especially in the mid/up-stream section. This study could help determine the water quality components that should be intensively monitored in the Nakdong River.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4660-4670
• /
• 2022

Hydroxyurea (HU) is a novel salt-free reductant used potentially for the separation of U/Pu in the advanced PUREX process. In this work, the radiation stability of HU were systematically investigated in solution by examining the effects of the type of rays (α, β, and γ irradiations), the absorbed dose (10-50 kGy), and the HNO₃ concentration (0-3 mol L^-1). The influence degree on HU radiolysis rates followed the order of the absorbed dose > the ray type > the HNO₃ concentration, but the latter two had moderate effects on HU radiolysis products where NH₄⁺ and NO₂^- were found to be the most abundant ones, suggesting that the differences of α, β, and γ rays should be considered in the study of irradiation effects. The radiolysis mechanism was explored using density functional theory (DFT) calculations, and it proposed the dominant radiolysis paths of HU, indicating that the radiolysis of HU was mainly a free radical reaction among ·H, e_aq^-, H₂O, intermediates, and the radiolytic free radical fragments of HU. The results reported here provide valuable insights into the mechanistic understanding of HU radiolysis under α, β, and γ irradiations and reliable data support for the application of HU in the reprocessing of spent fuel.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제43권3호
• /
• pp.148-155
• /
• 2023

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.010⁴ cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 10⁵ cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권12호
• /
• pp.1681-1690
• /
• 2000

A study on energy and protein utilization, and milk production of Bali cows on grass-legume diets was carried out using 12 first lactation cows (initial BW $263.79{\pm}21.66kg$) during a period of 16 weeks starting immediately post calving. The animals were randomly allotted into 4 dietary treatment groups R1, R2, R3 and R4, receiving from the last 2 months of pregnancy onwards, graded improved rations based on a mixture of locally available grass and legume feed ad libitum. R1 contained on a DM basis 70% elephant grass (PP, Penisetum purpureum) plus 30% Gliricidia sepia leaves (GS), R2 was 30% PP plus 55% GS supplemented with 15% Hibiscus tilliactus leaves (HT, defaunating effect), R3 and R4 were 22.5% PP+41.25% GS+11.25% HT+25% concentrate, where R3 was not and R4 supplemented with zinc di-acetate. TDN, CP and zinc contents of the diets were 58.2%, 12.05% and 18.3 mg/kg respectively for R1, 65.05%, 16.9% and 25.6 mg/kg respectively for R2, 66.03%, 16.71% and 29.02 mg/kg respectively for R3 and 66.03%, 16.71% and 60.47 mg/kg respectively for R4. Milk production and body weight were monitored throughout the experimental period. In vivo body composition by the urea space technique validated by the body density method and supported by carcass data was estimated at the start and termination of the experiment. Nutrient balance and rumen performance characteristics were measured during a balance trial of 7 days during the 3rd and 4th week of the lactation period. Results indicated that quality of ration caused improvement of ruminal total VFA concentration, increments being 52 to 65% for R2, R3 and R4 above R1, with increments of acetate being less (31 to 48%) and propionate being proportionally more in comparison to total VFA increments. Similarly, ammonia concentrations increased to 5.24 to 7.07 mM, equivalent to 7.34 to 9.90 mg $NH_3-N/100ml$ rumen fluid. Results also indicated that feed quality did not affect DE and ME intakes, and heat production (HP), but increased GE, UE, energy in milk and total retained energy (RE total) in body tissues and milk. Intake-, digestible- and catabolized-protein, and retained-protein in body tissues and milk (Rprot) were all elevated increasing the quality of ration. Similar results were obtained for milk yield and components with mean values reaching 2.085 kg/d (R4) versus 0.92 kg/d (R1) for milk yield, and 170.22 g/d (R4) vs 71.69 g/d (R1), 105.74 g/d (R4) vs 45.35 g/d (R1), 101.34 g/d (R4) vs 46.36 g/d (R1) for milk-fat, -protein, and -lactose, respectively. Relatively high yields of milk production was maintained longer for R4 as compared to the other treatment groups. There were no significant effects on body mass and components due to lactation. From the relationship $RE_{total}$ (MJ/d)=12.79-0.373 ME (MJ/d); (r=0.73), it was found that $ME_{m}=0.53MJ/kgW^{0.75}.d$. Requirement of energy to support the production of milk, ranging from 0.5 to 3.0 kg/d, follows the equation: Milk Prod. ($Q_{mp}$, kg/d)=[-2.48+4.31 ME($MJ/kg^{0.75}.d$)]; (r=0.6) or $Q_{mp}$=-3.4+[0.08($ME-RE_{body\;tissue}$)]MJ/d]; (r=0.94). The requirement for protein intake for maintenance ($IP_m$) equals $6.19 g/kg^{0.75}.d$ derived from the relationship RP=-47.4+0.12 IP; (r=0.74, n=9). Equation for protein requirement for lactation is $Q_{nl}$=[($Q_{mp}$)(% protein in milk)($I_{mp}$)]/100, where $Q_{nl}$ is g protein required for lactation, $Q_{mp}$ is daily milk yield, Bali cow's milk-protein content av. 5.04%, and $I_{mp}$ is metabolic increment for milk production ($ME_{lakt}/ME_{m}=1.46$).

• Journal of the Korean Applied Science and Technology
• /
• 제20권1호
• /
• pp.33-43
• /
• 2003

$LiMn_2O_4$ catalyst for $CO_2$ decomposition was synthesized by oxidation method for 30 min at 600$^{\circ}C$ in an electric furnace under air condition using manganese(II) nitrate $(Mn(NO_3)_2{\cdot}6H_2O)$, Lithium nitrate ($LiNO_3$) and Urea $(CO(NH_2)_2)$. The synthesized catalyst was reduced by $H_2$ at various temperatures for 3 hr. The reduction degree of the reduced catalysts were measured using the TGA. And then $CO_2$ decomposition rate was measured using the reduced catalysts. Phase-transitions of the catalysts were observed after $CO_2$ decomposition reaction at an optimal decomposition temperature. As the result of X-ray powder diffraction analysis, the synthesized catalyst was confirmed that the catalyst has the spinel structure, and also confirmed that when it was reduced by $H_2$, the phase of $LiMn_2O_4$ catalyst was transformed into $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase. After $CO_2$ decomposition reaction, it was confirmed that the peak of $LiMn_2O_4$ of spinel phase. The optimal reduction temperature of the catalyst with $H_2$ was confirmed to be 450$^{\circ}C$(maximum weight-increasing ratio 9.47%) in the case of $LiMn_2O_4$ through the TGA analysis. Decomposition rate(%) using the $LiMn_2O_4$ catalyst showed the 67%. The crystal structure of the synthesized $LiMn_2O_4$ observed with a scanning electron microscope(SEM) shows cubic form. After reduction, $LiMn_2O_4$ catalyst became condensed each other to form interface. It was confirmed that after $CO_2$ decomposition, crystal structure of $LiMn_2O_4$ catalyst showed that its particle grew up more than that of reduction. Phase-transition by reduction and $CO_2$ decomposition ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase at the first time of $CO_2$ decomposition appear like the same as the above contents. Phase-transition at $2{\sim}5$ time ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase by reduction and $LiMn_2O_4$ of spinel phase after $CO_2$ decomposition appear like the same as the first time case. The result of the TGA analysis by catalyst reduction ; The first time, weight of reduced catalyst increased by 9.47%, for 2${\sim}$5 times, weight of reduced catalyst increased by average 2.3% But, in any time, there is little difference in the decomposition ratio of $CO_2$. That is to say, at the first time, it showed 67% in $CO_2$ decomposition rate and after 5 times reaction of $CO_2$ decomposition, it showed 67% nearly the same as the first time.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.169-179
• /
• 1998

This paper was performed to estimate interrelations between humus level of sediments and nutrient release from sediments in Dae-cheong reservoir. For investigations, sediments were sampled in June and October, in 1997 at fish farms, embayment, and the main stream of Dae-cheong reservoir. Items for investigation are as follows; water content, weight loss on ignition(IG), porosities of sediments, contents of element such as hydrogen, nitrogen, carbon, and nutrient release rates. Water contents and porosities were measured to conjecture the physical trait and grain size trait. Weight loss on ignition was measured to determine the contents of organic substance. For determination of the humus level of sediments, carbon and nitrogen contents were measured by elemental analyzer. As a result of elemental analysis, C/N ratio was determined in the range of $3.0\~13.1$. From the elemental analysis, humus level of Dae-cheong reservoir sediment was estimated from mesohumic state to oligotrophic state. For the determination of nutrient release rate, $PO_4-P$ and $NH_4-N$ concentrations of interstitial water and overlying water were measured. By using the concentration difference between interstitial water and overlying water and using the Fick's diffusion law, the release rates of phosphorus and nitrogen from the sediment samples were calculated. Release rates of nutrients which directly influence to the water quality were $0.05\~8.63mgP/m^2day$ and $4.99\~36.56mgP/m^2day$. It was found that release rate was measured higher in the 1st sampling period than in the 2nd sampling period. For the determination of phosphorus content in sediment, TPs were measured in 807\~1542{\mu}g/g$ in the 1st samling period and $677\~5238{\mu}g/g$ in the End samling period. Phosphorus release rate and phosphorus content were not interrelated each other.

• The Korean Journal of Malacology
• /
• 제30권4호
• /
• pp.353-361
• /
• 2014

In order to investigate the effects of copper alloy on abalone physiology, we studied survival rate, respiration, excretion rate, and heavy metal accumulation in each organ of adults and spats. The survival rate of spats and adults showed 27-60% and 63-83% respectively, higher survival rate in adults. In particular, 100% of copper panel led to lowest survival rate and there was no sharp distinction according to copper alloy composition. The respiration rate and excretion rate of ammonia nitrogen was $1.81mgO_2/g$ D.W./h and 0.43 mg $NH_4-N/g$ D.W./h respectively at 100% of copper panel. In other words, there was a high significant difference at the level, but no significant difference at other test levels (P < 0.05). The atomic ratio (0: N) hit the lowest at the 100% of copper panel showing 3.79 and no significant differences were seen among other test groups with 6.57-7.18 of a very low range. This means that the species might have undergone nutritional stress. In case of copper accumulation, the 100% copper panel group showed the highest level in hepatopancreas and muscle showing 6.91 mg/kg and 1.60 mg/kg respectively but the rest of groups showed similar levels. Zinc accumulation raised at Cu-Zn alloy panel had high significance showing 18.50 mg/kg and 1.10 mg/kg in hepatopancreas and muscle respectively (P < 0.05). To sum up, a cage net made of 100% pure copper is expected to have a negative effect on abalone in light of survival rate, heavy metal accumulation, and atomic ratio (0: N). Moreover, given that the substratum used for the high adhesive species and nutritious stress that is represented through the atomic ratio need to be considered, the copper alloy net is thought not to be suitable for abalone aquaculture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.21-25
• /
• 2001

기계부품의 소형화 , 고속화, 그리고 저공해, 저소음이 요구되는 세계적인 추세에서 정밀가공기술은 기계 및 전자산 업에서 중요한 위치를 차지하게 되었다. 특히, 무심연삭공정(Centerless Grinding)은 높은 생산성과 정확한 치수 형성의 능력이 있어서 원통형상을 가공하는 중요한 생산공정으로 사용되어 왔다. 예컨대 VCR의 소형 축. Computer Disk Drive, 초소형 모터, 연료분사기등은 쎈터레스 연삭공정을 통하여 높은 정밀도를 얻고 있다. 하지만 이 공정의 특수성과 측정의 어려움으로 인하여 이러한 정밀형상의 형성과정은 아직도 잘 밝혀져있지 않다. 무심연연삭 공정에서는 부품이 기계에 고정되어 있지 않고 공작물 받침날 위에 올려져 있으며 조절바퀴와 연삭바퀴 사이에 눌려져 있다. 조절바퀴가 마찰력으로 공작물을 돌려주며 연삭바퀴에서 연삭가공이 일어나게 된다. 조절바퀴와 연삭바퀴사이의 거리는 기계 자체의 탄성변형으로 인하여 항시 변화하게 되며 이 거리의 변화가 공작물의 정밀형상 형성에 결정적인 영향을 미치게 된다. 본 연구에서는 무심연삭공정중 공작물과 받침날, 조절바퀴, 연삭바퀴의 상대운동을 기하학적으로 해석하였다. 특히 간섭조건을 사용하여 실제 공작물의 운동을 해석하여 순간 명목 절삭깊이를 구하였다. 또한 연삭 특성실험식을 이용하여 수직 연삭력을 구하고 연삭기의 탄성변형을 구하여 순간 실제 절삭깊이를 계산하였다. 그로부터 진원도형성에 관한 기본식을 유도하였다. 본 연구에서 유도된 진원도 형성 식을 이용하여 실험과 동일한 조건으로 컴퓨터 시뮬레이션을 수행하였다. 그리고 원형중의 어떤 이상형상, 즉, 홈또는 돌기는 반복되어서 다른 돌기 또는 홈을 형성 하게되며 그 반복주기는 공작물이 조절바퀴와 연삭바퀴위에 떠있는 각도에 따라 결점 됨을 확인하였다.'유창성' 에 그 목표를 두고 있는 점을 감안한다면, 시작단계부터 반드시 정확한 발음을 지녀야 하는 가의 문제도 생각해 볼 필요가 있다. 경우에 따라서는, 정확한 발음은 그 언어에 대한 숙련도가 점차 높아짐에 따라 이와 병행하여 이루어지는 경우도 흔히 경험하는 일이기 때문이다. 결국 초등영어 교육과정에도 명시되어 있듯이 '...영어에 대한 친숙함과 자신감을 심어주고, 영어에 대한 흥미와 관심을 지속적으로 유지시키는 것이 중요하기' 때문에 무엇보다 중요한 측면은 흥미와 관심을 유지시키는 지적인 학습활동보다는 정의적인 학습활동의 전개가 필요하다고 하겠다. 유리된 AA의 세포독설과 관련된 세포내의 역할에 대해 의문이 제기되었다., PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$

• Journal of Environmental Health Sciences
• /
• 제21권4호
• /
• pp.1-9
• /
• 1995

This study was carried to investigate the biodegradability of phenol in the wastewater with the two sludge blanket-packed bed reactor in series. Each reactor had a dimension of 0.09 m i.d. and 1.5 m height and consisted of two regions. The lower region was a sludge blanket of 0.5 m height and the upper region was a packed-bed of 1 m height. The packed bed region was charged with ceramic raschig rings of 10 mm i.d., 15 mm o.d. and 20 mm length. The reactors were operated at 35$\circ$C and the hydraulic retention time(HRT) was maintained 24 hours. The synthetic wastewater composed of glucose and phenol as major components was fed into the reactor in a continuous mode with incereasing phenol concentration. In addition, the nutrient trace metals($Na^+, Mg^{2+}, Ca^{2+}, PO_4^{3-}, NH_4^+, Co^{2+}, Fe^{2+}$ etc.) were added for growing anaerobes. The phenol concentration of the effluent, the overall gas production, the composition of product gas, the efficiency of COD reduction and the duration of acclimation period were measured to determine the performance of the anaerobic wastewater treatment system as the phenol concentration of the influent was increased from 600 to 2400 mg//l. Successfully stable biodegradation of phenol could be achieved with the anaerobic treatment system from 600 to 1, 800 mg/l of the influent phenol concentration. The upper level of influent phenol loading was high enough to meet most of the practical requirement. The duration of acclimation increased with the phenol loading. At steady state of the influent phenol concentration of 1800 mg/l, the treatment performance indicated the phenol reduction efficiency of 99%, the COD reduction efficiency of 99% and the gas production rate of 37 l/day. At the influent phenol concentration of 2400 mg/l, however, the operation of the treatment system was noted unstable. While the concentration of methane in biogas decreased with increasing the influent phenol loading, the carbon dioxide was increased. However, the concentration of hydrogen was varied negligibly. The concentration of methane was high enough to be used as a fuel. As a result, it is suggested that anaerobic phenol wastewater treament was economical in the sense of energy recovery and wastewater treatment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.283-287
• /
• 1997

공작기계의 가공정도는 공작기계의 운동기구가 가지고 있는 기하오차와 절작작업시 발생하는 진동, 열,절삭력에 의해서 공작기계의 구조계,주축계,이송계의 변형에 의해서 직접적인 영향을 받는다. 또 가공정도는 제품의 정밀도 및 품질에 직접적인 영향을 미치기 때문에 가공정도를 향상시키기 위한 방법으로 공작기계의 오차를 측정/해석하는 방법이 연구되고 있다. 일반적으로,공작기계의 오차는 Quasi-static 오차와 Dynamic오차로 구분할수 있다. Dynamic 오차는 기계의 진동,채터 및 스핀들의 진동에 의해서만 발생하는 오차이며,Quasi-static 오차는 공작기계 구성요소인 안내면,칼럼,볼스크류등의 기하오차와 온도변화에 의한 열변형오차에 의해서 발생한다. 특히,공작기계 및 절삭가공중에 발생하는 열원에 의한 열변형 오차는 공작기계의 기하오차에 비해서 가공정도에 큰 영향을 미치며[1,2],발생오차의 약 40~70% 정도가열변형 오차에 기인한 것으로 알려져 있다[1]. 실제 많은 실험결과를 볼 때 CNC공작기계이 경우는 열변형에 의한 오차는 기하오차에 비해서 매우 크게 나타났다. 이러한 열변형 오차는 공작기계 주위 온도와 공작기계 구성요소(칼럼,이송유니크,스핀들유니트)의 비선형적인 온도 특성에 의해서 주로 발생하고, Time-variant특성을 가지고 있기 때문에 작업중에 발생하는 온도특성에 따른 열변형 오차를 최소화 할 수 있는 방법이 필요하다. 스핀들유니트는 냉각방식을 사용하여 온도변화를 줄이고 있으나 반복적인 작업과 스핀들의 고속회전으로 인해서 복합 적인 온도변화를 발생시킨다. 또, 볼스크류의 지지방식이 양쪽 고정단 형태이기 때문에 조립시 예압(pre-load)을 주어서 열팽창을 보상하고 있으나 공작기계의 반복적인 이송으로 인해서 발생하는 온도변화에 의한 열오차를 보상하는데는 어려움이 있다.됩니다. 생리적 저항력이 없는 어린이들은 이러한 공해와 생활조건의 제일희생자가 되는 것입니다. 엄마들이 "얘는 감기, 비염, 편도선을 달고 삽니다...." "얘는 코감기, 목감기 번갈아 가면서 하도 앓고 있어서 양약율 중지하고 현재 한약을 먹고 있습니다." 이러한 역경은 극복할 수 있는가\ulcorner 질병의 메카니즘은 어떻게 작용되는가\ulcorner 등등을 육미회 센타에서 체험한 사례를 가지고 말씀드리고자 합니다..ell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구