• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.4
• /
• pp.275-280
• /
• 1990

In order to obtain the basic informations on the reasonable fertilization and soil management systems for a high soybean yield, both soybean leaves and soils were collected from 24 soybean-cultivated fields in central area of Korea, and analyzed. For this study, soybean leaves and soil were sampled together in July of 1988(growing season), and soil alone in October of 1988 (harvesting season) and April of 1989(sowing season) at each sampling site. The results might be summarized as follows: 1. The soil pH ranged between 4.8 and 6.8. and the pH after harvest decreased to 5.4 which compared with the pH 5.7 of growing season. 2. Both the 1N KCl extractable Al and the 1N $NH_4OAc$ extractable Al in soils were inversely correlated with the soil pH. the former concentration was negligible above pH 5.8. 3. The soil total-N and Bray 1-P after harvest were lower than those of growing season. The Bray 1-P's of sample soils were very high irrespective of sampling time. 4. The exchangeable Ca and Mg in soils even after harvest varied little whereas the exchangeable K decreased with time. 5. The N content in soybean leaves was not correlated with soil total-N, but highly correlated with the K content in soybean leaves. The Mg content in soybean leaves was also highly correlated with Ca content in suybean leaves and exchangeable Mg in soils.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.39-46
• /
• 2015

Objective of this research was to investigate the influence of compositions and concentrations of fertilizer solutions on the vegetative growth and nutrient uptake of 'Seolhyang' strawberry. To achieve this, the solutions of acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) were prepared at concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N and applied during the 100 days after transplanting. The changes in chemical properties of the soil solution were analysed every two weeks, and crop growth measurements as well as tissue analyses for mineral contents were conducted 100 days after fertilization. The growth was the highest in the treatments with BF, followed by those with NF and AF. The heaviest fresh and dry weights among treatments were 151.3 and 37.8 g, respectively, with BF $200mg{\cdot}L^{-1}$. In terms of tissue nutrient contents, the highest N, P and Na contents, of 3.08, 0.54, and 0.10%, respectively, were observed in the treatment with NF $200mg{\cdot}L^{-1}$. The highest K content was 2.83%, in the treatment with AF $200mg{\cdot}L^{-1}$, while the highest Ca and Mg were 0.98 and 0.42%, respectively, in BF $100mg{\cdot}L^{-1}$. The AF treatments had higher tissue Fe, Mn, Zn, and Cu contents compared to those of NF or BF when fertilizer concentrations were controlled to equal. During the 100 days after fertilization, the highest and lowest pH in soil solution of root media among all treatments tested were 6.67 in BF $100mg{\cdot}L^{-1}$ and 4.69 in AF $200mg{\cdot}L^{-1}$, respectively. The highest and lowest ECs were $5.132dS{\cdot}m^{-1}$ in BF $200mg{\cdot}L^{-1}$ and $1.448dS{\cdot}m^{-1}$ in BF $100mg{\cdot}L^{-1}$, respectively. For the concentrations of macronutrients in the soil solution of root media, the AF $200mg{\cdot}L^{-1}$ treatment gave the highest $NH_4$ concentrations followed by NF $200mg{\cdot}L^{-1}$ and AF $100mg{\cdot}L^{-1}$. The K concentrations in all treatments rose gradually after day 42 in all treatments. When fertilizer concentrations were controlled to equal, the highest Ca and Mg concentrations were observed in AF followed by NF and BF until day 84 in fertilization. The BF treatments produced the highest $NO_3$ concentrations, followed by NF and AF. The trends in the change of $PO_4$ concentration were similar in all treatments. The $SO_4$ concentrations were higher in treatments with AF than those with NF or BF until day 70 in fertilization. These results indicate that compositions of fertilizer solution should to be modified to contain more alkali nutrients when 'Seolhyang' strawberry is cultivated through inert media and nutri-culture systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.195-201
• /
• 1988

A laboratory experiment was coducted to investigate the relation of various soil phosphorus and some soil chemical properties which affect the composition of inoganic phosphorus and soil phosphorus with 149 phosphorus accumulated soil samples. Soil pH and exchangeable Ca were showed positively high significant correlation with 1.25 $N-NH_4$ OAc-P, Saloid-P, Ca-P and Total-P, however the soil pH was not showed significant relationship with $0.01M-CaCl_2-P$, Al-P, and Fe-P, respectively. Active Al and available phosphorus, water soluble P, and inoganic phosphorus were showed negatively high significant correlation, but Al-P and Fe-P were not. Also active Fe were showed positively significant correlation at 1% level for Fe-P and total-P. In the relationahips between soil pH and active Al, and exchangeable Ca, active Al were showed negatively high significant correlation with log regression equation, and exchangeable Ca were showed positively high significant correlation with liner regression equation. P sorbed by soil from p 20ppm solution was showed negatively high significant correlation with available phosphorus, water soluble P and $0.01M-CaCl_2-P$ in soil and positively with active Al, but was not significant with Ca-P.

• Korean Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.283-293
• /
• 2008

The objectives of the study were firstly to provide fundamental data for establishment of total maximum daily load (TMDL) management in Ulsan City, and secondly to make practical application of stream health assessment with tolerance range by each species when physiochemical and fish investigations were carried out together. A total of 44 sites in Taehwa River, Hoiya River, Dong Stream, and Cheongryang Stream were selected to monitor water qualities seasonally and fish investigation was performed in August 2006. Among the parameters of water quality, biological oxygen demand (BOD) and dissolved oxygen (DO) related to respiration, total nitrogen (T-N) and total phosphorus (T-P) related to nutrient and eutrophication, and total suspended solids (TSS) and $NH_4$-N were compared with vertical box plot by 8 dominant species. According to the fish investigation, 12 families 33 species were found including endangered species (Pungitius kaibarae) and introduced species (Lepomis macrochirus, Micropterus salmoides), and appearance rate of Korean endemic species was greater in Taehwa River (29.2%) than others. As the results of tolerance range by species, Zacco koreanus, Rhynchocypris oxycephalus, Iksookimia longicorpa, and Squalidus gracilis majimae had limited low range by water quality parameters indicating preference of good water quality. Whereas, Carassius auratus and Pseudorasbora parva were found downstream and urban-streams which were exposed from frequent inflow of pollutants. It concludes that the results help distinguishing sensitive, intermediate, and tolerant species when we evaluate stream health assessment with fish, and further making practical application for conservation and restoration of aquatic ecosystem.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.185-190
• /
• 2001

Alginate, a well-known biopolymer, is universally applied for immobilization of microbial cells. Biosorption characteristics of lead by waste biomass of immobilized A. niger beads, used in fermentation industries to produce citric acid, were studied. The immobilized A. niger beads, prepared via capillary extrusion method using calcium chloride, were applied in the removal of lead. Pb uptake was the highest in A. niger beads cells grown for 3 days with medium producing citric acid (12% sucrose, 0.5% $NH_4NO_3$, 0.1% $KH_2PO_4$, and 0.025% $MgSO_4$). Lead uptake by the immobilized A. niger beads and free A. niger mycellia beads increased sharply with time. However, while uptake by the immobilized A. niger beads continued to increase slowly, that by free A. niger mycellia beads stopped after 30 min. The optimum pH and temperature of lead uptake were found to be 6 and $35^{\circ}C$, respectively. The maximum uptake of lead was achieved with $50{\sim}100$ beads and 50 ml lead solution in a 250-ml Erlenmeyer flask, while, at over 100 beads, uptake of the lead decreased. The order of biosorption capacity for heavy metals was Pb>Cu>Cd. Pb uptake capacity of the immobilized A. niger beads treated with 0.1 M $CaCI_2$, 0.1 M NaOH, and 0.1 M KOH decreased compared to the untreated beads. On testing the desorption of Pb from the immobilized A. niger beads, re-uptake of Pb was found possible after desorption of the binding metal with 0.1 M HCI.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.305-321
• /
• 2006

Atmospheric Acid Deposition: Nitrogen Saturation of Forests: Volume weighted annual average wet deposition of nitroge at 33 sites in Korea during 1999-2004 ranged 7.28 to $21.05kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$ with average $12.78kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$, which values are similar level with nitrogen deposition of Europe and North America. The temperate forests that suffered long-term high atmospheric nitrogen deposition are gradually saturated with nitrogen. Such nitrogen saturated forest watersheds usually leach nitrate ion ($NO_3^-$) in stream water and soil solution. It may be likely that Korean forest ecosystems are saturated by much nitrogen deposition. In leaves with nitrogen saturation ratios of N/P, N/K and N/Mg are so enhanced that mineral nutrient system is disturbed, suffered easily frost damage and blight disease, reduced fine-root vitality and mycorrhizal activity. Consequently nitrogen saturated forests decrease primary productivity and finally become forest decline. Futhermore understory species are replaced the nitrophobous species by the nitrophilous one. In soil with nitrogen saturation uptake of methane ($CH_4$) is reduced and emission of nitrogen monoxide (NO) and nitrous oxide ($N_{2}O$) are increased, which gases are greenhouse gas accelerating global warming.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.212-220
• /
• 1995

An obligatory type II methanotroph Methylosinus trichosporium OB3b was cultivated on methanol as a sole carbon and energy source. The effects of methanol concentration, pH, temperature, nitrogen source and phosphate concentration on cell growth were investigated and the results were compared with the growth on methane, which had been studied previously. When $(NH_4)_2SO_4$ was used as a nitrogen source, the maximal specific growth rate (${\mu}max$) on methanol was $0.20hr^{-1}$ and the carbon conversion efficiency(CCE) was 43%. In comparison, on methane, ${\mu}max$ and CCE were $0.08hr^{-1}$ and 32%, respectively. Ammonia was found to be a better nitrogen source for methanol-growing cells. Cell yield on nitrogen (YX/N) was the same regardless of nitrogen source as 7.14g dry cells/g N, but the yield on methanol(YX/N) was higher with ammonia(0.8g dry cells/g MeOH) than with nitrate(0.64g dry cells/g MeOH). Optimal pH and temperature were 7.0 and $30^{\circ}C$, respectively. Methanol inhibition on cell growth was observed at above 0.5%(v/v). Inhibition by phosphate was observed at above 60mM, although the inhibition on methanol dehydrogenase activity started at a much lower level of 20mM. Based on the experimental findings, the cellular physiology of M. trichosporium OB3b growing on the two closely-related carbon sources were discussed extensively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.71-83
• /
• 2001

The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.198-203
• /
• 1989

Field experiment was conducted to find out the effect of lime materials application on yield, and chemical composition of Burley 21 in 1986. Lime materials and application rate were CaSO$_4$ : Ca 35kg/l0a. CaCO$_3$ : Ca 35kg/l0a and Liming: pH6.5. Contents of Ca and Mg in fresh or cured leaves were increased, but AI, Fe and Mn were decreased by applying lime materials. Yield were increased by applying lime materials. Among lime materials treatment, yield of limed and CaCO$_3$ plot were higher than that of CaSO$_4$ plot. Value per kg of cured leaves was not affected by applying lime materials. Cured leaves of CaSO$_4$ plot contained higher NH$_3$-nitrogen and alkalinity number of water insoluble ash than those of unlimed plot. Cured leaves of CaCO$_3$, plot contained higher alkalinity number of water soluble ash, insoluble ash and volatile neutral constituent, but lower protein-nitrogen and petroleum ether extracts than those of unlimed plot. Cured leaves of limed plot contained higher alkalinity number of water soluble and insoluble ash, NO$_3$-nitrogen and volatile neutral constituents, but lower protein -nitrogen, nicotine and petroleum ether extracts than those unlimed plot. Yield was increased, however leaf Quality in respect to chemical and organoleptic characteristics were not affected considerably by applying lime materials. Therefore, it suggests that controlling the soil pH about 6.5 by liming might be necessary for tobacco cultivation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.3
• /
• pp.175-182
• /
• 2021

Objectives: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. Patients and Methods: From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. Results: Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. Conclusion: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.