• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.273.1-273.1
• /
• 2016

Graphene exhibits a number of unique properties that make it an intriguing candidate for use in sensor. Here, we report graphene-based gas sensor. Graphene was grown using CVD. Then, the sensor was made using standard lithography techniques. The sensor conductance increased upon exposure to NH3, whereas it decreased upon NO2, suggesting that NH3 and NO2 might be discriminated using the graphene-based sensor. To improve the sensitivity, graphene was treated with hydrogen plasma. After hydrogen treatment, the electrical properties of graphene changed from ambipolar to p-type semiconductors. In addition, the sensor performance was improved probably due to an opening of bandgap.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.147-156
• /
• 1998

A synthesis process for PZT powder using $NH_{3}$ gas as a precipitator in a bubble column reactor was experimentally successful in develope a production process of piezoelectric ceramic PZT powder. Also as a reaction by coprecipitation, the crystalized PZT ceramic powder at the condition of over pH 9 could be attained. The time needed for reaction on the condition of $NH_{3}$ gas flow rate = 0.5 1/min, Ar gas flow rate = 2.0 1/min. Feed flow rate = 2.33 ml/sec was less than five minutes, so it could synthesize PZT powder for such a few moments. And the synthesized PZT powder was $0.17{\mu}m$ in diameter on an average.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.170-178
• /
• 1987

Changes of the properties of PECVD-SiN film with the variation of deposition process parameters were investigated and optimum process parameters were determined. The refractive index of the film increased with increasing substrate temperature and pressure, and decreasing rf-power, NH3/SiH4 gas ratio and total gas flow. BHF etch rate and deposition rate show a decreasing tendency with increasing refractive index. The step coverage of the film was not affected much by deposition rate and pressure, but improved apparently with increasing rf-power and NH3/SiH4 gas ratio. Also the optimum process parameters were determined by considering the characteristic properties as well as thickness uniformity of films. The refractive index of the film deposited under this condition was 2.06.

• Applied Science and Convergence Technology
• /
• v.23 no.1
• /
• pp.44-47
• /
• 2014

In this study, we investigated the basic properties of N-doped ethylcyclohexene plasma polymer thin films that deposited by radio frequency (13.56 MHz) plasma-enhanced chemical vapor deposition (PECVD) method with controlled ammonia flow rate. Ethylcyclohexene was used as organic precursor with hydrogen gas as the precursor bubbler gas. Additionally, ammonia ($NH_3$) gas was used as nitrogen dopant. The as-grown polymerized thin films were analyzed using ellipsometry, Fourier-transform infrared [FT-IR] spectroscopy, UV-Visible spectroscopy, and water contact angle measurement. We found that with increasing plasma power, film thickness is gradually increased while optical transmittance is drastically decreased. However, under the same plasma condition, water contact angle is decreased with increasing $NH_3$ flow rate. The FT-IR spectra showed that the N-doped ethylcyclohexene plasma polymer films were completely fragmented and polymerized from ethylcyclohexane.

• Fire Science and Engineering
• /
• v.10 no.2
• /
• pp.40-51
• /
• 1996

A synthesis process for PZT powder using NH$_3$ gas as a precipitator in a bubble column reactor was experimentally successful in develope a production process of Piezoelectric ceramic PZT powder. Also as a reaction by coprecipitation, the crystalized PZT ceramic powder at the condition of over pH 9 could be attained. The time needed for reaction on the condition of NH$_3$ gas flow rate=0.5 1/min, Ar gas flow rate=2.0 1/min, Feed flow rate=2.33 ml /sec was less than five minutes, so it could synthesize PZT powder for such a few moments. And the synthesized PZT powder was 0.17${\mu}{\textrm}{m}$ in diameter on an average.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.223-226
• /
• 2008

Seedlings of two rice cultivars i.e. cv. Daesanbyeo and cv. Dongjinbyeo were analyzed for growth and endogenous gibberellins (GAs) in response to nitrogen nutrition applied in the forms of $KNO_3$, $(NH_4)_2SO_4$ and $NH_4NO_3$. All the growth parameters showed an increase in N applied treatments and their magnitudes of increase were different depending on different nitrogen fertilizer forms. The endogenous GAs contents were increased with N application but differentially affected by various N-forms in both rice cultivars. In cv. Daesanbyeo, maximum amount of bioactive $GA_1$ was recorded for $(NH_4)_2SO_4$, while maximum amount of bioactive $GA_1$ in cv. Dongjinbyeo was observed in $NH_4NO_3$ applied treatments. In both rice cultivars, $KNO_3$ applied rice plants contained least $GA_1$ contents. Also, $GA_{19}$ was the most abundant GA found in rice seedlings whereas $GA_4$ was absent at seedling stage. Our study indicated that different rice cultivars showed different responses for the same fertilizer depending upon the response potential of each cultivar and the pertinent physiological responses to changes of endogenous GAs in rice cultivars, which were comparatively lesser in magnitude.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.341-347
• /
• 2012

The purpose of this study was to evaluate the effects of dietary Flammulina velutipes mycelium (FVM) on broiler chick performance, pathogenic bacterial (E. coli, Salmonella) counts in caecal contents and amount of $NH_3$ in excreta. Ninety-six broiler chicks (HanHyup No. 3, Korea) were divided into four groups: 1) Control (basal diet), 2) T1 (supplemented with 1% FVM), 3) T2 (3% FVM), and T3 (5% FVM), and rose for 7 weeks. In results, there were no significant differences among treatments in weight gain, feed intake, feed efficiency and carcass yield. However, giblets were significantly increased in FVM treatments compared with control group (p<0.05). The number of Salmonella in caecum was significantly decreased in FVM treatments compared with control group (p<0.05). The number of E. coli was decreased in T2 but increased in T1 and T3 compared with control group. The emission of fecal $NH_3$ gas was significantly decreased in accordance with increasing the feeding level of FVM (p<0.05). In conclusion, our data indicated that the supplementation of high level of FVM could inhibit the Salmonella in caecum and reduce the emission of fecal $NH_3$ gas. Therefore, FVM at 5% level could be added in the diet of broiler chicks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1219-1224
• /
• 2006

This study investigates the effect of $NH_3$ gas upon the growth of carbon nanotubes (CNTs) using thermal chemical vapor deposition. It is considered that the CNT synthesis occurs mainly through two steps, clustering of catalyst particles and subsequent growth of CNTs. We thus introduced $NH_3$ during either an annealing or growth step. When $NH_3$ was fed only during annealing, CNTs grew longer and more highly crystalline with diameters unchanged. An addition of $NH_3$ during growth, however, resulted in shorter CNTs with lower crystallinity while increased their diameters. Vertically aligned, highly populated CNT samples showed poor field emission characteristics, leading us to apply post-treatments onto the CNT surface. The CNTs were treated by adhesive tapes or etched back by dc plasma of $N_2$ to reduce the population density and the radius of curvatures of CNTs. We discuss the morphological changes of CNTs and their field emission properties upon surface treatments.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.37-43
• /
• 2003

The aim of this research is to study the feasibility of the solar(hot fluid) driven $NH_3/H_2O$ absorption chiller, made by re-manufacturing of Gas fired $NH_3/H_2O$ absorption chiller. This experimental study is performed with the temperature of the inlet hot fluid of generator. In order to determine the inlet temperature of the generator, which gives maximum COP, the experimental data are obtained with various hot fluid supply temperature in range of $130\sim170^{\circ}C$. Remodeled chiller is operated with periodical cooling effect, which due to mixture subcooled pool boiling, then the COP is evaluated in average. The maximum COP$(\sim0.36)$ is at $160^{\circ}C$. The temperature is stable operation temperature range of typical vacuum collector. It offers a feasibility of solar driven $NH_3/H_2O$ absorption chiller.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2007-2009
• /
• 1999

In this paper, discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was 2.5[$\ell$/min] for bubbling aqueous NaOH solution. Ammonia gas(14.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio[MR] was determined based on $NH_3$ to [NO+$SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration but SOx removal rate was not significantly effect by initial concentration, and NOx, SOx removal rates decreased with increasing gas flow rate.