• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.246-250
• /
• 1995

Microwave properties of $CaTiO_{3}$, MgO and CaO added $MgTiO_{3}$ ceramics are investigated. In the composition of $(Mg_{0.915}Ca_{0.085})TiO_3$, dielectric constant($varepsilon _T$) was 22, Qxf value was 50000, and temperature coefficient of resonant frequency($gamma_T$) approached to near zero $ppm/^{\circ}C$.$MgTiO_{3}$ ceramics with 0.1 mol of MgO showed the highest Qxf calue of 131000, dielectric constant of 17, and r, of -$50ppm/^{\circ}C$. Dielectric constant of 8 mol% CaO added to $MgTiO_{3}$-MgO was 20. Qxf valus was 52000, and sf was zero $ppm/^{\circ}C$. $MgTiO_{3}$-Mg0-Ca0 system showed higher Qxf value than ($Mg_{1-x}, Ca_x$) Ti03 system.

• The Korean Journal of Ceramics
• /
• v.5 no.3
• /
• pp.260-264
• /
• 1999

Effect of the particle size of $MgTiO_3$ and $CaTiO_3$ on the microstructural evolution during sintering of $0.93MgTiO_3-0.07CaTiO_3$ system was investigated. Microwave dielectric characteristics of the sintered ceramics were also measured. The microstructural evolutions were explained with an emphasis on the entrapping behavior of $CaTiO_3$ grain into the $MgTiO_3$ grain and were correlated with microwave dielectric characteristics. With an increasing particle size ratio between $CaTiO_3$and $MgTiO_3$, the fraction of entraped $CaTiO_3$ grains increased, which grain growth of $MgTiO_3$were concurrently accelerated due to decreasing drag force of its boundary migration. Besides, $CaTiO_3$-grain entrapment into the $MgTiO_3$grain interior led to decreaseing quality factor values.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.7
• /
• pp.344-348
• /
• 2006

The effect of x on microwave dielectric properties of the $(1-x)Mg_4Ta_2O_9-x(TiO_2,\;CaTiO_3,\;SrTiO_3)$ ceramics for microwave components were investigated. All spcecimens prepared by the conventional mixed oxied method and sintered at $1450^{\circ}C$. Microwave dielectric properties of the $(1-x)Mg_4Ta_2O_9-xTiO_2$ ceramics were influenced by $MgTi_2O_5$ phase. Also the microwave dielectric properties of the $(1-x)Mg_4Ta_2O_9-x(TiO_2,\;CaTiO_3,\;SrTiO_3)$ ceramics were dominated with an addition of $CaTiO_3\;and\;SrTiO_3$. The dielectric constant $(\varepsilon_r)$, quality factor $(Q{\times}f_r)$ and temperature coefficient of the resonant frequency $(TCRF,\;\tau_f)$ of the $(1-x)Mg_4Ta_2O_9-x(TiO_2,\;CaTiO_3,\;SrTiO_3)$ ceramics were $12.96\sim70.98,\;5,132\sim186,410GHZ$ and $-35.82\sim+75.96ppm/^{\circ}C$, respectively, and depend on x and addition materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.196-199
• /
• 2000

마이크로파용 세라믹 유전체로 사용되는 MgTiO$_3$-CaTiO$_3$계 유전체에 Li을 첨가하여 이때 얻어지는 마이크로파 유전특성과 소결특성에 대하여 알아보았다. 94MgTiO$_3$-6CaTiO$_3$으로 주조성을 고정시키고 여기에 Li$_2$CO$_3$를 Li원자 기준으로 0 ~ 10 mol% 범위 안에서 첨가하여 1200~140$0^{\circ}C$의 온도에서 4시간 소결하였다. Li의 첨가량이 적을 때에는 유전체의 품질계수와 유전상수가 모두 감소하였으나 약 lmol% 이상 되면 다시 증가하였으며, 이후 첨가량이 과도해지면 다시 서서히 감소하는 경향을 볼 수 있었다. 1.0 ~ 3.0 mol%의 첨가량 범위 안에서 Li은 MgTiO$_3$-CaTiO$_3$계 유전체의 품질계수를 증가시켜주는 역할을 하는 것으로 나타났다 1.5mol%의 Li을 첨가하고 1275$^{\circ}C$에서 4시간 소결한 시편에서 유전상수는($\varepsilon$$_{r}$) 20.0, Qf는 78,000 그리고 공진주파수 온도계수($\tau$$_{f}$)는 -1.6ppm/$^{\circ}C$의 결과를 얻을 수 있었다.다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.136.2-136
• /
• 2000

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.75-81
• /
• 1999

$CaTiO_3$-$ La(Mg_{2/3}Ta_{1/3})O_3$ solid solutions were prepared in order to improve the microwave dielectric properties of $CaTiO_3$. XRD analysis revealed that the crystal structure of the solid solution changed from orthorhombic to monoclinic as the amount of $ La(Mg_{2/3}Ta_{1/3})O_3$increased. When x=0.3 in (1-x)$CaTiO_3+xLa(Mg_{2/3}Ta_{1/3})O_3$, the dielectric constant was 49, the temperature coefficient of resonance frequency was +$14ppm/^{\circ}C$, and $Q \times f_0$ was 17000.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.136.1-136
• /
• 2000

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.960-966
• /
• 2004

On the bases of the results from "Additive Coating of BaTiO$_3$ Powder using Sol Coating Method I", experimental condition was defined. Representative additives for BaTiO$_3$, that is to say, Mg, Ca and Mn were experimented. The sources of the metal ion were used by organometal complex. As added it, the stability of BaTiO$_3$ sol was evaluated. Mg and Ca were stable, however, The solubility limit of Mn-ATH was 0.05 mol ratio in Mn-ATH/sol. The solubility limit of Mg ion in BaTiO$_3$ was lower than 2 mol%. From the x Ray diffraction patterns, lattice parameters were different with temperature and additives, because the solubility of metal ion was varied in BaTiO$_3$. The dielectric constant of BaTiO$_3$ powders which coated with the 1.5 mol% Mg and calcined at 1200$^{\circ}C$ was increased with 20%.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.651-659
• /
• 1994

BaTiO3 ceramics were sintered on Al2O3, MgAl2O4, MgO and Mg-, Ca-, Y-stabilized zirconia setters. Then the influence of setters on the microstructure of BaTiO3 ceramics and the stability of setters were investigated by SEM, EDAX and XRD analyses. The microstructure of BaTiO3 ceramics sintered on Al2O3, MgAl2O4, MgO and Mg-PSZ showed large grain growth, but little grain growth on Ce-TZP(Tetragonal Zirconia Policrystal). Mg-PSZ(Partially Stabilized Zirconia), Ca-PSZ, Ce-TZP setters showed extensive phase transformation. Y-TZP and fused Y-SZ (Stabilized Zirconia) setters were stable. The liquid sintering aids of BaTiO3 ceramics accelerate mass transport. The reaction of SrTiO3 in BaTiO3 with ZrO2 resulted in the formation of SrZrO3.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.843-853
• /
• 1997

The effect of dopant on microwave dielectric properties of (1-x)MgTiO3-xCaTiO3 ceramics, known to be used as microwave dielectric resonators for global positioning system and personal communication system, has been analyzed in terms of variations in defect concentrations and microstructural features with its addition. The addition of dopants was revealed to result in a significant change in the microstructure as well as defect concentration of the ceramics. For instance, the quality factor is proportional to sintered density of the ceramics by inversely proportional to grain size as well as vacancy concentration. Accordingly, it is believed that the dopant effect on the microwave dielectric properties should be separately analyzed with either microstructural change or the change in vacancy concentration.