• 동력기계공학회지
• /
• 제21권2호
• /
• pp.14-19
• /
• 2017

The corrosion characteristics of Al-Si-Mg alloy were investigated in $O_2$ and $H_2S/H_2$ environments at high temperature. The weight gain and the reaction rate constant of the Al-Si-Mg alloy were measured in the oxygen and hydrogen sulfide environments at 773K. The weight gain of Al-Si-Mg alloy was showed parabolic increase in the oxygen and hydrogen sulfide environments. The reaction rate constants were confirmed to be $1.45{\times}10^{-4}mg^2cm^{-4}sec^{-2}$ in the oxygen environment and $6.19{\times}10^{-4}mg^2cm^{-4}sec^{-2}$ in the hydrogen sulfide environment respectively. As a result of XPS analysis on the specimen surface, $Al_2O_3$ and MgO compounds were detected in oxygen environment and $Al_2(SO_4)_3$ sulfate was detected in the hydrogen sulfide environment. Corrosion rate of Al-Si-Mg alloy was about 4.3 times faster in hydrogen sulfide environment than oxygen environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.877-881
• /
• 2006

We obtained sputtering yields for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found to have less $24^{\sim}^30%$ sputtering yield values from 0.24 atoms/ion up to 0.36 atoms/ion than MgO layers with the values from 0.36 atoms/ion up to 0.45 atoms/ion for irradiated $Ga^+$ ion beam whose energies ranged from 10 keV to 14 keV. And $MgAl_2O_4$ layers have been found to have lowest sputtering yield values from 0.88 up to 0.11. It is also found that $MgAl_2O_4/MgO$ and MgO have secondary electron emission $coefficient({\gamma})$ values from 0.09 up to 0.12 for $Ne^+$ ion whose energies ranged from 50 eV to 200 eV.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.395-403
• /
• 2006

[ $MgAl_2O_4$ ] 막은 MgO 보호막 보다 단단하며 수분 흡착 오염 문제에 상당히 강한 특성을 가진다. 본 연구에서 AC-PDP 의 유전체보호막으로 사용되는 MgO 보호막의 특성을 개선하기 위해 $MgAl_2O_4/MgO$ 이중층 보호막을 제작하여 특성을 조사하였다. 전자빔 증착기를 사용하여 Cu 기판에 MgO 와 $MgAl_2O_4$을 각각 $1000\AA$ 두께로 증착, $MgAl_2O_4/MgO$ 을 $200/800\AA$ 두께로 적층 증착 후, 이온빔에 의한 충전현상을 제거하기 위해 Al 을 $1000\AA$ 두께로 증착하였다. 집속 이온빔 (focused ion beam: FIB) 장치를 이용하여 10 kV 에서 14 kV 까지 이온빔 에너지에 따라 MgO는 $0.364{\sim}0.449$ 값의 스퍼터링 수율에서 $MgAl_2O_4/MgO$ 을 적층함으로 $24{\sim}30 %$ 낮아진 $0.244{\sim}0.357$ 값의 스퍼터링 수율이 측정되었으며, $MgAl_2O_4$는 가장 낮은 $0.088{\sim}0.109$ 값의 스퍼터링 수율이 측정되었다. g-집속이온빔 (g-FIB) 장치를 이용하여 $Ne^+$ 이온 에너지를 50 V 에서 200 V 까지 변화시켜 $MgAl_2O_4/MgO$ 와 MgO 는 $0.09{\sim}0.12$의 비슷한 이차 전자방출 계수를 측정하였다. AC- PDP 셀의 72 시간 열화실험 후 SEM 및 AFM으로 열화된 보호막의 표면을 관찰하여 기존의 단일 MgO 보호막과 $MgAl_2O_4/MgO$의 적층보호막의 열화특성을 살펴보았다.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.169-177
• /
• 2023

Phase stability diagrams were constructed for magnesium alanate (Mg(AlH₄)₂) nanoparticles to investigate the reversible hydrogen storage reaction by using density functional theory. Our findings indicate that bulk Mg(AlH₄)₂ shows favorable hydrogen release, but unfavorable hydrogen uptake (adsorption) reactions. However, for Mg(AlH₄)₂ nanoparticles, it was observed that hydrogen release and recharge can be achieved by controlling the particle size and temperature. Furthermore, by predicting the decomposition phase diagram of Mg(AlH₄)₂ nanoparticles with varying hydrogen partial pressure, it was discovered that reversible dehydrogenation reactions can occur even in relatively large nanoparticles by controlling the hydrogen partial pressure.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.97-101
• /
• 2004

This paper reports the studies on the wear-corrosion behavior of Al-Mg alloy in various pH environments. In various pH of sea water, corrosion and wear-corrosion loss of Al-Mg alloy were investigated. Also, the polarization test of Al-Mg alloy using potentiostat/galvanostat was carried out. And the rubbed surface of Al-Mg alloy using scanning electron micrographs after wear-corrosion test was examined in various pH values of sea water. The main results are as following : The polarization resistance of Al-Mg alloy in pH 4 solution is higer than that in pH 6.7 solution, and the corrosion current density in pH 4 is controlled than in pH 6.7 solution. The wear-corrosion loss of Al-Mg alloy with lowering pH becomes sensitive. As the oxide product of Al-Mg alloy appears granular structure and exholiation phenomenon, wear-corrosion loss of Al-Mg alloy increases.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.573-580
• /
• 1998

MgO와 Al 분말을 자전고온연소합성법으로 $MgAl_2O_4$ 스피넬 상을 합성하였다. MgO 와 Al을 테르밋 반응으로 생성하였으며, 가열반응생성으로 $800^{\circ}C$ 예열온도에서 반응시켰다. DTA/TG, 합성생성물, 최고온도 공정조건에 대해 연구하였고, MgO와 Al은 MgO+2Al+ 3/$2O_3$ $\rightarrow$ $MgAl_2O_4$ 로 합성되었다. 미반응된 재료로부터 MgAl2O4 스피넬의 활성화 에너지는 -264.8kcal/mol의 발생열량과 5634K의 최고 반응온도로 계산되었다. 테르밋 반응후의 시험편의 체적느 6% 증가하였다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.818-823
• /
• 2018

In this study, the effect of pre-aging treatment for inhibition of natural aging of Al-4.8Zn-1.3Mg alloy by extrusion process was investigated. Firstly, the as-cast microstructure of Al-4.8Zn-1.3Mg alloy billet and its evolution during homogenization($460^{\circ}C$, $4h+510^{\circ}C$, 5h) were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), hardness analysis. The as-cast microstructures of Al-4.8Zn-1.3Mg alloy reveal $Mg_2Zn$, $Al_5Cu$, $Al_{13}Cu$ formed between dendrities. After homogenization, MgZn, $Al_4Cu$, $Al_{13}Cu$ phases precipitated into the matrix. In addition, standard deviation of homogenized billet was improved than as-cast billet from 2.62 to 0.99. According to pre-aging($100^{\circ}C$, 1h) Al-4.8Zn-1.3Mg alloy by extrusion process, yield strength and tensile strength deviation improved more than condition by natural aging.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.822-827
• /
• 2017

Mg/Al layered double hydroxide with two-dimensional (2D) nanostructures was synthesized by a hydrothermal technique. The morphology and aspect ratio of $Mg_4Al_2(OH)_{14}3H_2O$ were controlled by the concentration and kinds of the hydrolysis agent, and temperature. The aspect ratio of $Mg_4Al_2(OH)_{14}3H_2O$ layered double hydroxides with the 2D hexagonal crystal structure was tailored from about 12.6 to about 45.7. The intercalated $CO{_3}^{2-}$ anions of the synthesized 2D $Mg_4Al_2(OH)_{14}3H_2O$ layered double hydroxides were exchanged to $NO_3{^-}$ anions. The bulk 2D $Mg_4Al_2(OH)_{14}3H_2O$ layered double hydroxides with the increased space between two layers due to the anion exchange were exfoliated in a formamide solution. The aspect ratio of the exfoliated 2D $Mg_4Al_2(OH)_{14}3H_2O$ layered double hydroxides increased to 570.3.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.479-488
• /
• 2011

Nanofiltration was performed with polyaluminium chloride solutions at different pH conditions to understand effects of inorganic compounds on aluminum hydrolysis products, i.e., three distinctive groups of aluminum species: polymeric Al at low pH; $Al(OH)_3$ at neutral pH; and ${Al(OH)_4}^-$ at high pH. The PACl solution was prepared to be approximately 4.0mM and adjusted to the designated pH. The influence of inorganic compounds on Al species fouling was investigated with 4.9mM $CaCl_2$ and 3.5mM $MgSO_4$ because $Ca^{2+}$, $Mg^{2+}$, $Cl^-$, ${SO_4}^{2-}$ are the most common inorganics in the drinking water. NF membrane fouling was measured by flux decline rate. The impact of $CaCl_2$ was not significant on the individual Al hydrolysis products fouling. However, the flux decline rate was drastically changed in the presence of $MgSO_4$. The concentration of particulate matters was considerably increased possibly due to interaction between Al species and ${SO_4}^{2-}$ where $MgSO_4$ was introduced. The particulates were accumulated on the membrane and enhanced the hydraulic resistance of the cake layer. In addition, conductivity removal of the membrane was decreased when Al-hydroxide was dominant due to reduction of membrane surface charge. The rejection of $Ca^{2+}$and $Mg^{2+}$ were considerably different, which implys that composition of inorganics paly a role on conductivity removal.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.307-312
• /
• 2009

제주도의 화산쇄설성 퇴적암인 신양리층에서 산출되는 motukoreaite와 quintinite-3T를 보고한다. 두 광물은 Mg-Al 층상복수산화물로서 현무암 유리질 입자 사이를 충전하는 극미립판상 입자들의 구상 또는 포도상 집합체로 산출된다. Quintinite-3T의 집합체 외각에 motukoreaite의 판상 입자들이 과성장하여 피복하였다. 두 광물의 X선회절자료와 화학조성은 대체로 문헌에 보고된 값들과 유사하지만, motukoreaite의 Mg/Al 비는 보고된 값보다 조금 크다. 전자현미화학 분석 값으로부터 구한 motukoreaite와 quintinite-3T의 구조식은 각각 $Na_{1.6}Ca_{0.1}Mg_{40.7}Al_{20.7}Si_{0.9}(CO_3)_{13.6}(SO_4)_{7.4}(OH)_{108}56H_2O$와 $Mg_{3.7}Al_{1.9}Si_{0.2}(OH)_{12}(CO_3)_{0.8}(SO_4)_{0.2}3H_2O$이다. 두 광물은 얕은 바다에 퇴적된 현무암 유리질 입자들이 해수와 반응하여 생성 되었으며, 해저 환경에서 화산쇄설성 퇴적물의 교결 및 고화작용에 기여하였다.