• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.327-340
• /
• 2002

This study was conducted to investigate the effects of domestic clay minerals on feed efficiency, meat quantity, meat quality and economic traits in 24 head of Hanwoo steers(166.1kg in body weight) for 540 days from six to 24 months in age. Feeding trial was conducted with 4 treatment(six heads/treatment) which were T1(Control), T2(Control+Kaolinite), T3(Control+Bentonite), T4(Control+Illite). The results obtained are summarized as follows; The range of average daily gains were 0.682 to 0.713, 0.669 to 0.714, 0.690 to 0.840 and 0.699 to 0.756kg in growing, fattening, finishing and over-all period, respectively, and the gains were high in T1 for growing and fattening period but in clay mineral groups for finishing and over-all period, especially it was high in Illite and Bentonite groups. Concentrates and TDN intakes per unit of kg gains were lower in clay mineral groups than in control and was lower especially in Bentonite groups. In carcass characteristics, dressed carcass and fresh meat and retailed cut percent were not apparently difference by treatments, and yield index was 69.3, 68.9, 68.8 and 68.6 in T3, T2, T4 and T1, respectively. Marbling scores were 5.1, 4.6, 4.4 and 3.3 in T3, T2, T4 and T1, respectively, and the range of shear force by treatment was from 3.51 to 6.02kg/cm2. and were improved with significant difference(P<0.05) in clay mineral groups than in control. Also in palatability traits, panel test scores of juiciness, tenderness and flavor were improved in clay mineral feeding groups, especially the flavor was improved with highly significant difference(P<0.01) in clay mineral groups than in control. In total fatty acid contents, the rate of SFA(saturated fatty acid) in longissimus muscle of beef was higher in the order of T2, T3, T1 and T4 while the rate of MUFA(monounsaturated fatty acid) was high in the order of T4, T3, T1 and T2. The content of oleic acid which is major influential factor at the flavor of beef was higher in Illite groups than in any other groups. In composition of amino acids in longissimus muscles of beef, the rate of essential amino acids was high in the order of T1, T2, T3 and T4. and the rate of amino acids in clay mineral groups was smaller than in control.In chemical component in Gom-Tang(soup of bone) made by Hanwoo steer’s leg-bone, the ranges of crude protein, ether extract, and crude ash was 0.81 to 1.24, 0.17 to 0.35 and 0.07 to 0.09%, respectively. In mineral composition, the ranges of Ca, P, Na and Mg was 14.01 to 15.77, 11.45 to 16.40, 37.92 to 49.99 and 0.26 to 0.46ppm, respectively. Chemical composition were not apparently different but mineral composition was increased in clay mineral groups than in control. Income by treatments was 967,096 to 1,524,055 Won per head for 540 days and income of clay mineral groups in comparison with control’s increased by 23.7 to 57.6 percent, and especially it was higher in bentonite and(or) Illite groups than others. According to the above results it may be concluded that clay mineral to growing-fattening Hanwoo steers can be improved the meat quantity, meat quality and income. Especially the effect of bentonite and illite is large and can be recommended for usage to improve animal performance as feed additives of growing-fattening Hanwoo steers.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.127-134
• /
• 2015

This study was designed to determine the prevalence of gallstones in the last three years and evaluate the associated risk factors in the population who underwent health screening. Although there are many studies reporting the prevalence and risk factors of GB polyp, the results varied among each report. The aims of this study were to evaluate the prevalence rate and risk factors of GB polyp, colon polyp and fatty liver in the population who underwent health screening. The study population consisted of 4,877 visited the health promotion center in Dalseogu, Daegu in Korea from January 2011 to December 2013. Each participant in the study had their biliary system gallbladder examined using ultrasonography. The prevalence of GB polyp was evaluated along with age, gender, metabolic syndrom, body mass index (BMI), Fatty liver, Colon polyp. A showed of total 383 (7.9%) people were found to have GB polyps. The prevalence of sex among 256 (9.8%) patients men and 127 (5.6%) women which showed significantly higher in male than in female subjects(p=0.001). The mean size of the GB polyps 4.92 mm (1.6-17 mm). The sizes of most GB polyps (73.6%) were less than 10 mm in diameter. 122 subjects (31.28%) had multiple GB polyps which 2 or more polyps and 261 subjects (68.2%) had single polyp. Independent risk factors related with GB polyp were male gender (OR 0.551, p<0.001), overweight that BMI above $23kg/m^2$ (OR 0.713, p=0.002) triglyceride (OR 0.571, P<0.001), metabolic syndrome (OR 0.049, p=0.033) and colon polyp (OR 1.409, p=0.002). In spite of the conclusion, the prevalence GB polyp was higher than previous Korea and other country reports. The GB polyp in a healthy population was results as 7.9%. The risk factors of GB polyps were found to be male, being overweight, triglyceride, metabolic syndrome and colon polyp. Not only the subject of a health examination is needed but, a further study of the general public when possible.

• Clinical and Experimental Pediatrics
• /
• v.45 no.12
• /
• pp.1484-1490
• /
• 2002

Purpose : The purpose of this study was to look at prevalences of abnormal serum aminotransferase levels and abnormal serum total cholesterol levels among adolescents with obesity in Seoul area. Methods : Body mass index[$BMI(kg/m^2)$], serum aspartate aminotransferase(AST) alanine aminotransferase( ALT), and total cholesterol levels were measured in 26,876 adolescents(male : 13,287, female : 13,589) of first grade of high school in Seoul between the ages of 15 and 16 years, enrolled in a large health examination survey by Seoul School Health Center(SSHC) in 2001. Obesity was defined as BMI more than 95th percentile for age and sex and normal weight was defined as BMI between 25th percentile and 75th percentile for age and sex. Abnormal levels of AST, ALT and total cholesterol were defined as more than 95th percentile for age and sex. Results : The BMI at 95th percentile was 28.7 in males and 26.9 in females. The prevalence of abnormal AST levels was higher in obesity group than in normal weight group. In males, those were 23.7% and 3.7%, respectively(P<0.01, $x^2-value$ : 529.2). In females, those were 11.8% and 4.9 %, respectively(P<0.01, $x^2-value$ : 56.3). The prevalence of abnormal ALT levels was significantly higher in the obesity group compared with the normal weight group. In males, those were 33.9% and 1.7%, respectively(P<0.01, $x^2-value$ : 1,693.4). In females, those were 22.3% and 3.9%, repectively(P<0.01, $x^2-value$ : 397.6). The prevalence of abnormal total cholesterol levels was higher in the obesity group than in the normal weight group. In males, those were 16.8% and 3.5%, respectively(P<0.01, $x^2-value$ : 268.3). In females, those were 9.0% and 5.4%, respectively(P<0.01, $x^2-value$ : 14.2). Conclusion : This study revealed that the prevalences of abnormal AST, ALT and total cholesterol level were higher in the obese group than in the normal weight group.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.136-140
• /
• 1999

Purpose : Prostate specific antigen (PSA) is a useful tumor marker, which is widely used as a diagnostic index and predictor of both treatment and follow-up result in prostate cancer. A prospective analysis was carried out to obtain the period of PSA normalization and the half life of PSA and to analyze the factors influencing the period of PSA normalization. The PSA level was checked before and serially after radical radiotherapy. Materials and Method : Twen쇼 patients with clinically localized prostate cancer who underwent radical external beam radiotherapy were enrolled in this study. Accrual period was from April 1993 to May 1998. Median follow-up period was 20 months. Radiotherapy was given to whole pelvis followed by a boost to prostate. Dose range for the whole pelvis was from 45 Gy to 50 Gy and boost dose to prostate, from 14 Gy to 20 Gy. The post-irradiation PSA normal value was under 3.0 ng/ml. The physical examination and serum PSA level evaluation were performed at 3 month interval in the first one year, and then at every 4 to 6 months. Results : PSA value was normalized in nineteen patients (95%) within 12 months. The mean period of PSA normalization was 5.3 (${\pm}$2.7) months. The half life of PSA Of the nonfailing patients was 2.1 (${\pm}$0.9) month. The nadir PSA level Of the nonfailing Patients waS 0.8 (${\pm}$0.5) ng/ml. The period of PSA normalization had the positive correlation with pretreatment PSA level (R$^{2}$=0.468). The nadir PSA level had no definite positive correlation with the pretreatment PSA level (R$^{2}$=0.075). The half life of serum PSA level also had no definite correlation with pretreatment PSA level (R$^{2}$=0.029). Conclusion :The PSA level was mostly normalized within 8 months (85%). If it has not normalized within 12 months, we should consider the residual disease in prostate or distant metastasis. In 2 patients, the PSA level increased 6 months or 20 months before clinical disease was detected. So the serum PSA level can be used as early diagnostic indicator of treatment failure.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.255-269
• /
• 2005

This study was aimed to investigate genetic relationships, variables, and correlations between economic traits and metabolic materials in serum components according to bleeding periods and breeding locations for the castrated and not castrated Hanwoo cattle at National Livestock Research Institute. Analysis of variance for serum hormones and metabolic materials showed significant differences by breeding locations except for testosterone and globulin. Statistical differences for serum components were detected by birth year except for cortisol, total protein, globulin and creatinine, and by castration except for total protein and BUN. All the serum components were tended to have sire effects except for testosterone resulting in some degree of additive gene actions. Breeding locations showed statistical significances for carcass weight and back fat thickness, but not in carcass rate, KPH, live weight and transportation weight loss. Effects of breeding locations and castration were significant for all weight measurement periods except for 9 month and 6 month, respectively. A significant sire effect was observed in all weight measurements. Least squared means for concentration of serum components by breeding year, season and castration were not significant. High concentration of cortisol, creatinine and triglyceride and low concentration of IGF-1 and glucose were detected in castrated cattle. Concentration of testosterone with castrated cattle was $5.2\%$ corresponding to non castrated cattle. Estimation of heritabilities of serum components using a sire model with restricted maximum likelihood were ranged 0.07 to 0.58. High heritabilities were estimated for total protein, albumin, globulin, cortisol, creatinine and BUN were 0.53, 0.54, 0.42, 0.45, 0.58 and 0.54, respectively. Low heritabilities were estimated fur calcium, testosterone and IGF-1 for 0.07, 0.15 and 0.12, respectively. Heritabilities for carcass weight, back fat thickness, meat yield index, KPH, and IMF were estimated as 0.39, 0.45, 0.30 0.13, and 0.93. Heritabilities of weights on 18, 12, 9, 6, and 24 month were estimated as 0.78, 0.76, 0.62, 0.58 and 0.58. Estimated heritabilities for average daily gain on 6${\~}$2, 12${\~}$18, and 18${\~}$24 month were 0.80, 0.75 and 0.19, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.194-200
• /
• 2007

The purpose of this study was to observe the effects of fiber free control diet (CD), cellulose diet (CED) and pectin diet (PTD) on diet induced thermogenesis (DIT) in healthy Korean woman for 3 hours. The three test diets were as follows: CD (carbohydrate intake: 63.4% of energy, protein intake: 14.0% of energy and fat intake: 25.8% of energy), CED (carbohydrate intake: 62.5% of energy, protein intake: 14.0% of energy and fat intake: 26.1% of energy) and PTD (carbohydrate intake: 62.7% of energy, protein intake: 14.0% of energy and fat intake: 26.2 of energy). Groups were served 10 g of cellulose for CED and 10 g of pectin for PTD, respectively. DIT was measured at fasting state and at 30, 60, 90, 120, 150 and 180 min after consuming each diet. The mean age of all subjects was $22.3{\pm}1.9$ years. Body weight was $52.5{\pm}8.6$ kg and body mass index was $20.6{\pm}2.7kg/m^2$. Preprandial resting energy expenditure was $0.79{\pm}0.02kcal/min$ and postprandial DIT were $14.05{\pm}0.62%$ for CD, $9.33{\pm}0.62%$ for CED, $11.07{\pm}1.35%$ for PTD as a percentage of the energy load. DIT of CD was significantly higher than those of CED and PTD. There was no significant difference in postprandial change in body temperature after consuming each test diets and the sympathetic nervous system activity measured by heart rate was significantly higher in CD than CED and PTD (p<0.05). With this study, it can be concluded that CED and PTD have significantly lowered in DIT (p<0.05). We didn't show the correlation of the factors that relate in DIT; thus, further experiments on that matter should be followed.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.752-759
• /
• 1995

Background: Bronchial asthma is characterized by noctunal dyspnea, cough and wheezing because of airway hyperresponsiveness to nonspecific stimuli. These symptoms and signs are also observed in patients with congestive heart failure. Therefore, this is so called "cardiac asthma". There are lots of experimental and clinical datas to suggest that airway dysfunctions occur in acute and chronic congestive heart failure. However, it is still controversial whether bronchial hyperresponsiveness is present in patients with congestive heart failure. To assess whether bronchial hyperresponsiveness is present in patients with congestive heart failure and to demonstrate the relationship between bronchial responsiveness and vascular pressure, we performed methacholine provocation test in 11 patients with mitral valvular heart disease. Methods: All patients were in the New York Heart Association functional class II and treated continuously with digoxin and/or dichlozid and/or angiotensin converting enzyme inhibitor except one patient. All patients were undergone right and left side heart catheterization for hemodynamic measurements. A 20 percent fall of peak expiratory flow rate were considered as positive response to methacholine provocation test. Results: 1) Only one patient who has normal pulmonary artery pressure, pulmonary capillary wedge pressure, cardiac index was positive in methacholine provocation test. 2) Their mean pulmonary artery pressure, pulmonary capillary wedge pressure were $21.72{\pm}9.70mmHg$, $15.45{\pm}8.69mmHg$ respectively which were significantly higher. Conclusion: It is speculated that in stable congestive heart failure patients, bronchial responsiveness as assessed by methacholine provocation test may not be increased.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.333-337
• /
• 2009

A new malting barley variety, "Daho", was developed from the cross between "Milyang85 and Suwon335" at the Department of Rice and Winter Cereal Crop (DRWCC) NICS, in 2007. An elite line, YMB2064-B-8-2-4-1-1, was selected in 2004 and designated as "Milyang134". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2005 to 2007 and was released with the name of "Daho", having high yielding and BaYMV resistance. The average heading and maturing dates of "Daho" were April 19 and May 27, which were 2 days later and 1 day earlier than those of "Jinyang", leading variety, at the regional adaptation yield trials (RYT), respectively. "Daho" had longer culm length (84 cm), more spikes per $m^2$ (915) and higher 1,000 grain weight (39.2 g) than those of "Jinyang" in paddy field condition. "Daho" was showed resistance to BaYMV at the regions of Naju, Jinju, and Milyang but moderately resistance at Iksan. However, the response of "Daho" to other environmental stresses was similar to "Jinyang". The yields of "Daho" at upland and paddy fields were about 5.20 MT/ha, 4.81 MT/ha, respectively, which is about 38%, 25% higher than those of "Jinyang" in the regional adaptation yield trials (RYT), respectively. It has higher grain assortment, germination capacity, water sensitivity and Kolback index but lower malt extract, diastatic power and filtration speed than those of "Jinyang".

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2006

Regardless of the recent observed warmer winters in Korea, more freeze injuries and associated economic losses are reported in fruit industry than ever before. Existing freeze-frost forecasting systems employ only daily minimum temperature for judging the potential damage on dormant flowering buds but cannot accommodate potential biological responses such as short-term acclimation of plants to severe weather episodes as well as annual variation in climate. We introduce 'dormancy depth', in addition to daily minimum temperature, as a complementary criterion for judging the potential damage of freezing temperatures on dormant flowering buds of grape vines. Dormancy depth can be estimated by a phonology model driven by daily maximum and minimum temperature and is expected to make a reasonable proxy for physiological tolerance of buds to low temperature. Dormancy depth at a selected site was estimated for a climatological normal year by this model, and we found a close similarity in time course change pattern between the estimated dormancy depth and the known cold tolerance of fruit trees. Inter-annual and spatial variation in dormancy depth were identified by this method, showing the feasibility of using dormancy depth as a proxy indicator for tolerance to low temperature during the winter season. The model was applied to 10 vineyards which were recently damaged by a cold spell, and a temperature-dormancy depth-freeze injury relationship was formulated into an exponential-saturation model which can be used for judging freeze risk under a given set of temperature and dormancy depth. Based on this model and the expected lowest temperature with a 10-year recurrence interval, a freeze risk probability map was produced for Hwaseong County, Korea. The results seemed to explain why the vineyards in the warmer part of Hwaseong County have been hit by more freeBe damage than those in the cooler part of the county. A dormancy depth-minimum temperature dual engine freeze warning system was designed for vineyards in major production counties in Korea by combining the site-specific dormancy depth and minimum temperature forecasts with the freeze risk model. In this system, daily accumulation of thermal time since last fall leads to the dormancy state (depth) for today. The regional minimum temperature forecast for tomorrow by the Korea Meteorological Administration is converted to the site specific forecast at a 30m resolution. These data are input to the freeze risk model and the percent damage probability is calculated for each grid cell and mapped for the entire county. Similar approaches may be used to develop freeze warning systems for other deciduous fruit trees.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.