• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.158-162
• /
• 2009

"Wonkwang" is a new sprout-soybean cultivar developed from the cross between Danyeobkong and MS91001 at the Honam Agricultural Research Institute (HARI) and National Institute of Crop Science (NICS), RDA, in 2007. The preliminary, advanced and regional yield trials to evaluate the performance of Iksan 56 were carried out from 2003 to 2007. This cultivar has a determinate growth habit, purple flower, grayish brown pubescence, yellow seed coat, Grayish brown hilum, lanceolate leaflet shape and small seed size (10.9 g/100 seeds). The maturity date of "Wonkwang" is three days later than the check variety, "Pungsan". It has a good seed quality for soybean-sprout and resistance to lodging. The soybean-sprouts grown from "Wonkwang" have high isoflavone ($3,481{\mu}g/g$)contents. This cultivar has resistance to soybean mosaic virus (SMV) and necrotic symptom (SMV-N) and other most troublesome soybean diseases which are bacterial pustule and black root rot. The grain yield of "Wonkwang"in the regional yield trials (RYT) for 3 consecutive years was averaged 3.05 ton per hectare, which was 8% higher than that of the check cultivar "Pungsan".

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.445-451
• /
• 2021

In this study, we described the production of an antibody to living modified organisms (LMOs) containing the gene encoding for 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) from Agrobacterium tumefaciens strain CP4 EPSPS provides resistance to the herbicide glyphosate (N- (phosphonomethyl) glycine). These LMOs were approved and have recently been used in the feed, food production, and processing industries in South Korea. Highly efficient monoclonal antibody (mAb) production is crucial for developing assays that enable the proper detection and quantification of the CP4 EPSPS protein in LMOs. This study describes the purification and characterization of recombinant CP4 EPSPS protein in E. coli BL21 (DE3) based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and matrixassisted laser desorption/ionization time-of-flight mass spectrometry. The production of mAbs was undertaken based on the standard operating procedure of Abclon, Inc.(South Korea), and the purity of the mAbs was assessed using SDS-PAGE. The following five mAb clones were produced: 2F2, 4B9, 6C11, 10A9, and 10G9. To verify the efficiency and specificity of the five developed mAbs, we performed Western blotting analysis using the LM (living modified) cotton crude extracts. All mAbs could detect the CP4 EPSPS protein in the LM cotton traits MON1445 and MON88913 with high specificity, but not in any other LM cottons or non-LM cottons. These data indicate that these five mAbs to CP4 EPSPS could be successfully used for the further development of antibody-based detection methods to target CP4 EPSPS protein in LMOs.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.114-114
• /
• 2022

There are 28 families and 166 species of exotic weeds on agricultural land and among these, 23 families and 80 species of exotic weeds occur on pastures. Among them, the Solidago altissima is a perennial weed belonging to the asteraceae family and it is an exotic weed that spreads to the surrounding area using methods such as high seed production, vegetative propagation using underground rhizomes and allelochemical. Accordingly, in 2009, the Ministry of Environment designated it as an ecosystem-disrupting species. This study was conducted to obtain basic data about the effects of S.altissima derived allelochemicals on forage crops. The root of S.altissima was separated, dried in the shade and then pulverized to prepare an root powder. Powder was repeatedly extracted with methanol for 3 days and concentrated under reduced pressure to obtain an root methanol extract. Dissolve the extract in distilled water, dispense it in a separate-funnel and proceed with liquid-liquid extraction by adding equal amounts of n-haxane (Hex), chloroform (CHCI₃), ethyl acetate (EtoAC), and butanol (BuOH) in order of increasing polarity. A seed-bioassay was performed using fractions for each solvent, followed by separation and purification by silica gel column chromatography. As a result of the fraction germination test for each solvent, the IC₅₀ values using the fresh weight of each fraction were 898.3 mg L^-1, 676.3 mg L^-1, 1160 mg L^-1 and 1360 mg L^-1. CA, CB, and CC fractions were obtained through primary silica gel column chromatography that used CHCI₃ fraction. As a result of seed-bioassay using each fraction, the IC₅₀ values for the fresh weight of each fraction was 537.3 mg L^-1, 1280 mg L^-1 and 1947 mg L^-1. Based on this, 5 fractions were obtained as a result of secondary silica gel column chromatography using the CA fraction. A seed-bioassay was performed, as a result, the lowest IC₅₀ value was calculated as 226.7 mg L^-1 in the CAE fraction. Based on this, the fraction was analyzed by GC-MS. The results of this study can be used as basic research data on the effects of weeds on forage crops and allelochemicals secreted from S. altissima.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.427-432
• /
• 2024

The polymer crystallization process, promoting the formation of ferroelectric β-phase, is essential for developing polyvinylidene fluoride (PVDF)-based high-performance piezoelectric energy harvesters. However, traditional high-temperature annealing is unsuitable for the manufacture of flexible piezoelectric devices due to the thermal damage to plastic components that occurs during the long processing times. In this study, we investigated the feasibility of introducing a flash lamp annealing that can rapidly induce the β-phase in the PVDF layer while avoiding device damage through selective heating. The flash light-irradiated PVDF films achieved a maximum β-phase content of 76.52% under an applied voltage of 300 V and an on-time of 1.5 ms, a higher fraction than that obtained through thermal annealing. The PVDF-based piezoelectric energy harvester with the optimized irradiation condition generates a stable output voltage of 0.23 V and a current of 102 nA under repeated bendings. These results demonstrate that flash lamp annealing can be an effective process for realizing the mass production of PVDF-based flexible electronics.

• Korean journal of applied entomology
• /
• v.15 no.3 s.28
• /
• pp.147-151
• /
• 1976

Laboratory experiments were conducted to evaluate the resistance of the new rice varieties Milyang $\#$21 and $\#$23 at the seedling stage to the brown planthopper(Nilaparvata lugens), small brown planthopper(Laodelphax striatellus), white-back planthopper(Sogatella furcifera), green rorice leafhopper(Nephotettix cincticeps) and zigzag-striped leafhopper (Recilia dorsalis) The varieties Yushin and T(N)-1 were used as susceptible check and the resistant check varieties were Mudgo to brown planthopper, ASD-7 :o small brown planthopper, Colombo to white-back planthopper, IR2061 (46763) to green rice leafhopper and Vellailanalgayan to zigzag-striped leafhopper. The varieties Milyang $\#$21 and $\#$23 were moderate in plant reaction only to the green rice leafhopper and $\#$23 was moderately resistant in plant rection only to the small brown planthopper. The nymphs of plant-and leaf-hoppers were more prefered Milyang $\#$21 and $\#$23 and susceptible check-varieties were more preferred for feeding than the resistant check-varieties. The green rice leafhopper and aigzag·striped leafhopper much more prefered Milyang $\#$21 and $\#$23 for oviposition, while brown planthopper and small brown planthopper more prefered the resistant cheeks than test varieties and susceptible checks. However, there was no any steady relationship in ovipositional preference between resistant and susceptible to the hoppers. Shorter nymphal-periods and higher rate of adult emergence were observed in the test varieties and the susceptible checks compared with the resistant checks. In conclusion, the varieties Milyang $\#$21 and $\#$23 seemed to be lack of true resistance to the plant-and leaf-hoppers from the viewpoints of antibiosis and feeding preference.

• Journal of Food Hygiene and Safety
• /
• v.34 no.6
• /
• pp.562-570
• /
• 2019

The heavy metal concentrations in dried seafoods commonly consumed in Gyeonggi-do were analyzed. Concentrations of lead (Pb), cadmium (Cd), mercury (Hg) and selenium (Se) were measured in 95 samples with an inductively-coupled plasma-mass spectrometer (ICP-MS) and an Hg analyzer. The average concentration [mean±SD(minimum-maximum) mg/kg] of heavy metals were as follows: Pb 0.062±0.071(0.002-0.428), Cd 0.083±0.100(0.004-0.540), Hg 0.012±0.012(N.D-0.054) and Se 0.839±0.371(0.362-2.124). All the levels were below the recommended standards of the MFDS (Ministry of Food and Drug Safety). In the comparison of heavy metal content by anchovy size, it was shown that mercury was significantly higher in large anchovy (P<0.05). Selenium levels were found to differ significantly in small anchovy and large anchovy (P<0.05). Pb, Cd and Hg were significantly higher in Tiger prawn among shrimp (P<0.05). The heavy metal and selenium levels of anchovy and shad were highest in the intestine. However, the heavy metal and selenium levels of shrimp were highest in the head. In addition, weekly (monthly) intake of mercury and cadmium from dried seafoods was found to be 0.712% and 2.978% of PTW(M)I (Provisional Tolerable Weekly(Monthly) Intake) respectively. Therefore, it was found that dried seafoods were safe for consumption.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.89-101
• /
• 2003

River deposits and farmland soils were analyzed to investigate the pollution level of heavy metals in the vicinity of the Goro abandoned Zn-mine. Surface (0-40 cm) and subsurface (40-100 cm) soils were collected around a main river located at the lower part of the Goro mine, and analyzed by ICP-MS for Cd, Cu, Pb, Zn and Cr after 0. 1N HCI extraction and by AAS for As after IN HCI extraction. Concentrations of cadmium and lead at the surface river deposits close to the mine were over the Soil Pollution Warning Limit (SPWL), and 43% of sample sites (6 of 14 samples) were over SPWL for As suggesting that river deposits were broadly contaminated by arsenic. Results from farmland soil analysis showed that surface soils were contaminated by heavy metals, while only arsenic was over SPWL at 50% of sampling sites. Main pollution mechanism around the Goro mine was the discharge of mine tailing and waste rocks from the storage site to the river and to adjacent farmland during flood season. Pollution Grades for sample locations were prescribed by the Law of Soil Environmental Preservation, suggesting that the pollution level of heavy metals around the Goro mine was serious, and the remediation operation fur arsenic and the isolation of mine tailing and waste rocks from river and farmland should be activated to protect further contamination. The area needed to clean up was estimated from pollution distribution data and the remediation methods such as a soil washing method and a soil improvement method were considered as the further remediation operation for arsenic contaminated soils and river deposits around the Goro abandoned mine.

• Journal of Food Hygiene and Safety
• /
• v.31 no.3
• /
• pp.186-193
• /
• 2016

An analytical method was developed for the determination of oxathiapiprolin in agricultural commodities. Oxathiapiprolin is a new oomycide (fungicide of piperidinyl thiazole isoxazoline class) which controls downy mildew in cucurbits caused by Pseudoperonospora cubensis (oomycete plant pathogen). Agricultural commodities were extracted with acetonitrile and partitioned with dichloromethane to remove the interference, adjusting pH between 9 and 10 by 1 N sodium hydroxide. After purification by silica SPE cartridge to clean up the interference of organic compounds, they were finally quantified by HPLC-UVD (high performance liquid chromatograph ultraviolet detector) using a wavelength at 260 nm and confirmed by LC-MS (liquid chromatograph mass spectrometer) in electro-spray ionization positive ion mode. The standard calibration curve was linear with coefficients of determination ($r^2$) 1.00 over the calibration ranges (0.025-2.5 mg/L). Recoveries were ranged between 86.7 to 112.7%, with relative standard deviations less than 10% at three concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates. The overall results were determined and estimated according to the CODEX guidelines (CAC/GL40). The proposed method for determination of oxathiapiprolin residues in agricultural commodities can be used as an official method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1138-1146
• /
• 2016

This study was performed to estimate daily intakes of aluminum from Platycodon grandiflorum A. De Candolle and evaluate their potential health risks for Koreans. Estimated daily intake of aluminum was calculated, whereas the actual level of aluminum in Platycodon grandiflorum A. De Candolle was analyzed using inductively coupled plasma mass spectrometry. Food consumption amount was drawn from Korea National Health and Nutrition Examination Survey (KNHANES VI-1). In analysed samples, aluminum values ranged from 0.54~564.38 mg/kg in peeled Platycodon grandiflorum A. De Candolle samples (n=53) and from 0.72~28.05 mg/kg in unpeeled ones (n=40). Statistically significant difference (P<0.001) was detected according to the type of skin. To estimate the dietary intake of Platycodon grandiflorum A. De Candolle, a total of 7,242 respondents (scenario I) were compared to 227 Platycodon grandiflorum A. De Candolle consumption subjects (scenario II). Estimated daily intake of aluminum was calculated based on point estimates. Level of safety for aluminum was evaluated by comparison with Provisional Tolerable Weekly Intake (PTWI), 1 mg/kg bw, set by the Joint FAO/WHO Expert Committee on Food Additives. For scenario I, mean estimated daily intake of aluminum was 0.001 mg/kg bw/d. For scenario II, mean estimated daily intake of aluminum was 0.033 mg/kg bw/d, and 95th percentile estimated daily intake was 0.610 mg/kg bw/d. For scenario II, aluminum from Platycodon grandiflorum A. De Candolle had a mean weekly intake that was the 23.1% of PTWI.